Satellite Pro S300-11Y - downgrade from Windows XP Home edition does not work

Similar Questions

• Satellite L450D - 13 X - audio driver Windows XP Home edition does not work

  Hello

  I have a Satellite L450D-13 X, who was on Windows 7 64 bit, but I just put XP on it, hoping for better game performance.
  I downloaded all the drivers XP Toshibas and all seem to work except the sound. I've been following discussions about this anywhere and try some of the suggestions that end up being for a slightly different model, but nothing will do.

  Help, please.

  What exactly is the problem?
  Sound card is properly installed in the Device Manager?
  What version of Windows is installed (SP2 or SP3)?

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• Satellite U400-10 has: Downgrade from Windows XP Home edition

  I got my laptop U400-10 for XP. Few things left pending:

  1. How can I get the LED on the top of the screen (and Satellite/power LED) to decrease intensity again by pressing the LED light on the top of the screen? Worked under vista. Cannot run Windows XP Home edition. Probably a Toshiba driver... but the Witch one?

  2. I get a Device Manager question mark in front of audio storage devices and mass HD. I checked the internet and it seems related to the HDMI port. But how to fix it? I can't identify the right Toshiba drivers on the page/download driver Toshiba.

  3. How can I get Bluetooth (with the standard windows drivers)? Bluetooth Monitor driver Toshiba form doesn't seem to work.

  Thanks for the replies.

  Concerning

  Hello

  (1.) I think you could turn on and off the LED of Illumination in the BIOS.
  But maybe it s not supported under Win XP.

  (2) some features are not supported by XP. This unit is probably the module of Robson former Turbo Memory. This material will be supported only by Windows Vista so there is no driver Windows XP.

  (3) possibly you have ONLY installed the BT monitor. It is a diagnostic utility, and if you want to use BT you need a driver of BT.
  The BT driver can be downloaded from the page of the portal of BT or driver Toshiba

  See you soon

• My product key of windows xp home edition does not work?

  Good while my laptop was a major virus, so after 5 antivirus, antispyware programs could not locate or get rid of it, I had no choice but to re - install windows xp home edition. But the problem is that my product key does not work. Why is this and what can I do, I don't have money to buy another computer laptop/product key

  Dell inspiron 6400

  p.s the guarantee expired already tried that one.

  In this case, you are probably using the wrong type of disc.

  You MUST use an OEM disc with an OEM key in WIndows XP

  You MUST use a disk of Windows XP Home Edition with a WIndows XP Home Key

• Downgrade from Windows Vista Home Edition to Windows XP Pro Dutch on Satellite P200-15N

  Not knowing where I really should put this... I put it in this part of the forum too :)

  So:

  Hello

  I bought a new laptop with Vista Home and two Partitions... I would like to install on the second partition "Windows XP pro" (with official key & SP2 included)! But when I run the XP Cd I get an error that the HD is not recognized... So I searched on the forum here, to see if there is a possibility of passby he...

  So what I did:
  (1) I download the "Intel storage drivers" of->
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  (2) I used the Floppy machine, to create a floppy disk with the necessary drivers (also from the above site)

  (3) I downloaded a copy of freeware "Nlite".

  (4) I also downloaded the additional drivers on the "Toshiba" site itself (Lan, storage,...)

  (5) I did a "Xp Pro P200-15N" card and put all the drivers... Including the Exe I downloaded from the link above named "iata76_cd.exe"...

  (6) I have made a new Win XP bootable CD with "Nlite" & added all the drivers that I downloaded and followed the procedure given by "Nlite". He made a new bootable CD (with all the drivers and .exe and .inf, etc...)

  (7) then I boot my laptop with the CD, but it always gives an error on sata drives... (that it can not be found...)

  So my question is... What I'm doing wrong and what should the other drivers I download to make it work? I have an external USB floppy drive... If additional drivers must be added... So I hope that there is someone can help to Ho...

  I install XP for professional reasons. Things Vista Home can not handle...

  Hope I got a respons soon... CZ, looks really URGENT...

  THX in advance and sorry if there are errors in my writing (I still am of Belgium)

  UPDATE *.
  The method above does not work for me... So took my USB floppy drive and put the drivers on it (hit 'F6' at the start, added the drivers found on the link above, it install it)...
  Then I could also choose a partition...

  So far so good... He asked me if wanted to format it or not... I said ok...
  Then, when he wanted to start the copy, I got:

  Insert the CD-rom or the floppy disk with the name
  Driver Intel Matrix Storage Manager
  In station of A:

  * Press ENTER when you are ready...

  And I do not know what I do... CZ hitting enter doesn't do anything: s

  So what I'm doing wrong, it becomes really ANNOYING and frustrating... I did everything they said in the link, in fact the method with f6, but still now reaction: s... Everyone?

  Sincerely,
  Frédéric

  Thanks for the latest info!

• Satellite A200-1AD - downgrade from Windows XP Home edition

  I've read all the other different threads around the upgrade/downgrade to XP, but I have a few questions.

  1. What do I need to change the BIOS before I start to replace Vista by XP or can I wait until I loaded the base XP and then make the BIOS change?

  2. If I try and update the BIOS for XP and it crunches the laptop is covered by the warranty?

  If the 2 answer is Yes, then I'll save a step by step process that I do to change the operating system from Vista to XP. Any help much appreciated.

  Hello Ken

  All I know is some BIOS designed for Windows XP Home edition for computer series laptop Satellite A200. I installed Windows XP Home edition on my A200 but some FN keys do not work properly. Other stuff works well and WXP turns quite quickly.

  I recommend installing WXP without updated BIOS to see if there is a serious problem. If this is not the case, leave such BIOS what.

• Satellite C660-108 - Windows XP Home Edition does not install

  I try to install Windows XP Home Edition on a Toshiba Satellite C660-108, without success.

  I changed the BIOS disk in "Compatibility" mode (what is the same thing as "Legacy IDE"?) by following the instructions on a Yahoo Answers question on the same issue.

  What has improved the situation, in what I now get an error message a few minutes after installing XP said "Starting Windows" instead of immediately after. The error message is the same that I have already received and is as follows:

  "A problem has been detected and windows has shut down to prevent damage to your computer...". "Technical information: * STOP: 0x0000007B (0xF78D663C, 0xC0000034, 0x00000000, 0x00000000).

  Thanks in advance for any help,

  Luke

  PS - I'm a mac user and do not have much experience in the use of Windows laptops, so I need instructions spelled out clearly enough if possible.

  The error could be related to drive HARD and the setting in the BIOS of the controller...
  Probably, you need to install Win XP using SATA AHCI mode and to add the driver SATA as described here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  http://APS2.toshiba-tro.de/KB0/SPD4603LT0000R01.htm

  I found a similar description in the MS forum:
  http://answers.Microsoft.com/en-us/w...4b511ed?auth=1

• Satellite L650-1MT - WLan driver for Windows 7 x 64 does not work

  Hallo forum-Member Support,

  I reinstalled my windows, because my old hard drive has been damaged. Now I have Windows 7 x 64.
  By installing the hardware drivers for the Toshiba homepage, I had a problem with the W - Lan driver.
  It has a WiFi Atheros adapter, but the driver does not work. After extracting the window closes and the installation starting.

  What can I do?

  + The message was edited: subject has been changed.

  Hello

  Thanks for posting this message here in the forum, but I think that no one would be able to provide more help without knowing the number of laptop model.
  What cell phone do you have exactly?
  Are you sure that the laptop supports the Atheros Wlan card?

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows 7 starter edition does not work with Java 7 (unable to load the chat room) how to fix?

  Hello

  I have Windows 7 edition - starter and Java 7 when I try to use a school chatrooom - java won't load properly - tech school says it's because Windows 7 does not support Java 7 - any ideas on how to fix?
  THX,
  Maja

  If he believes that the school needs to get a new technology.

  To check if the problem is that the cat does not work with Java 7, uninstall Java 7 and install Java JRE 6 from here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  You must specify the exact error messages see you or post links on the screenshots so that your problem can be better understood.

• See 4.6 Client installed on Windows 7 Home edition does not connect to the Manager

  Dear friends,

  I just joined this communitity, need help with a small problem of debugging that arrested me in the track.

  I recenty view upgrade 4.5 to 4.6 view, upgrade some services don't prevent not problems, but I have overcome by reading the blogs on the internet. After the upgarde I can't connect to connection Manager from the view of my Client to view 4.6 - Vesrion - 4.6.0 366101. Only thing I can think that my view client 4.6 is installed on Windows 7 Home Edition. But I had no problem connecting to the connection manager when I saw 4.5 client installed on the same workstation.

  Any help will be much appreciated...

  In VMware View Administrator go to

  Display Configuration > servers > discovers the connection to the server > edit.

  Uncheck the box for «use a tunnel connection is secure on the desktop»

  then restart the view connection server service

• Windows XP Home Edition does not load in any mode after reboot to uninstall Norton

  I wanted to get rid of Norton anti-virus, then, I have downloaded and run the Norton Uninstaller. After what seemed an eternity he finished and asked me to restart the computer to complete the uninstalation. I clicked the botton "Restart now" and after the screen, which shows the bios is nothing. No loading screen, no beeps or anything else, just black. In addition, it does the same thing in all modes.

  I removed the HDD and an IDE to USB for connecting to my mobile backup (Win7 Ultimate) and performed a virus with TrendMicro Titanium antivirus scan + and scan with malewarebytes paid version maleware. No virus or maleware found. So, I ran a check/repair through backup with no found error disc.

  I do not have a XP or 7 CD repair/install, nor am I money right now. I really need to get going again.

  Infected computer:

  Compaq Presario M2000

  Windows XP Home Edition SP3

  Processor Intel Centrino Pentium M 1.5 GHz

  1 GB of RAM

  Intel Extreme Graphics 2

  Machine backup:

  Dell Inspiron 1501

  Windows 7 Ultimate Edition SP2

  AMD Turion 64 MK - 36 2.0 GHz

  3 GB RAM

  Integrated ATI Radeon Xpress 1150

  Looks like you somehow corrupted the bootloader.

  If I'm not mistaken, you can technically download disc for Microsoft Windows XP SP3 OEM HOME legally, as long as you use your current license.

  You can also communicate with Compaq and request a repair disk.

• Windows 7 Home Premium - "does not work Windows genuine" pop up

  My Windows 7 Home Premium has been installed, activated and working perfectly for the past 18 months. I've been on the last few days PF, make popup windows telling me "this computer is not running genuine Windows" (0x8004fe21). This is obviously false because I bought the upgrade directly from Microsoft in November 2011 and it has been fine.

  When I click "Pay online now", the Microsoft site runs a quick scan and then points me to a download page of Windows 7 for £75.

  I have already tried to get the license key, restart the laptop, launching an update of Windows and reboot again - all to nothing does and I still get seriously irritating popup.

  Any ideas why this has suddenly started happening and how to fix it?

  Any suggestions gratefully thanks received.

  Try to activate Windows 7 by phone, post back with the results.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• Windows XP Home edition does not charge up - screen Toshiba and then nothing

  I opened my computer to stand by earlier. And received an error message such as:

  WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
  Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

  I also tried to "last good configuration" but who also refuses to load.
  I can, however, in the BIOS.

  The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

  I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

  Is this a hardware problem? I lose data?

  I am aware that my system was clean and I was using a good anti-virus.

  Please please let me know if you have any suggestions or comments.

  Thanks in advance, Max...

  Hi RisSsky,

  you are in a deep deep sh... t... No. not really...
  Looks like the filestructure hard disk is damaged.
  the hard drive is recognized by the bios? means, it is listed as a device?
  There is a sound of the hard drive? scratch or buzzing or ticking?

  CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

  don't panik, we will do things.

  2 options to solve this problem:
  the first and save:
  -Remove the old hdd (you need later)
  -get a new hard drive and make a recovery/installation on the new drive.
  -also get a usb - hdd connector to access old data hdd and copy on the new disk.
  or the 2nd:
  -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
  Be aware that if there is a problem it will get worse...
  -start in safe mode

  If you're lucky, the 2nd option will do.
  as said before I'd do it "the safe way.