Satellite Pro S500 - 11 c - password not recognized

Similar Questions

• Re: Satellite Pro S500 - brightness adjustment does not work correctly

  On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

  When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

  Hi asdf.

  I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

  In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Satellite Pro 6050: DVD player is not recognized correctly

  The guide shows the Toshiba SD-R2102 as one of the internal drives for machine of HRT (supplied with the CD-ROM). So I bought one. Running XP and when I install the hardware is not recognized at boot, or in Device Manager. Looked at the site to support my BIOS is the last and can find no driver there or on my tools disk.

  Can someone point me in the right direction?

  Hello

  As far as I know your device has a Slim select Bay. If the drive is not in a good position and there is no proper contact of the reader doesn t exist for the system. Please check if the disc is in the correct position. If you put it inside at the end to do a click. After that, the reader is correctly positioned.

  Good bye

• Satellite Z30 - A - 12R BIOS password not recognized after update BIOS

  I updated the bios after that I warned the Bios of Toshiba v3.50. The process was done by the utility software of Toshiba and after restarting it has 'password =' on a blank screen and it does not recognize my BIOS password, write not 'certified '.

  I also tried the HARD drive password, but no luck.

  What can I do now?

  Hello

  Before you try to update the BIOS, all passwords must be removed!
  BIOS password can be removed by the authorized service provider available in your country.

  But the unknown HARD disk password can be removed more.
  In such a case the HDD isn't accessible and cannot be used.

  Mate sorry but in my opinion that you only have one chance to get the BIOS password removed. you need the help of ASP.

• Re: Satellite Pro A200/PSAE7E - HD DVD not recognized

  I've demoted Biz from Vista to XP Pro. Everything works great, EXCEPT...
  the DVD/RW works well as a cd / dvd drive (writing not tested), but it will recognize all the data on the disc when an HD DVD is inserted, so not HD-DVD movies.

  And what application you are trying to use to watch movies HD-DVD Windows XP Home edition?

• Satellite Pro L10: 1 GB card not recognized SD

  My PCMCIA card reader does not recognize my sd 1 GB card that other cards work ok, but when I put the PCMCIA and sd 1 GB memory card in my wife on the other laptop, everything is fine.

  Hello

  Sorry, but it is not easy to say what to do. Do not forget that the PCMCIA card is installed correctly.
  By the way: can you tell us the exactly the description of this PCMCIA card and have you tested it with lower capacity cards?

• Can not enter into the BIOS of Toshiba Satellite Pro S500-15W

  I am trying to enter a Toshiba satellite pro S500-15W bios. I tried the key F2 and FN + F2 keys don't set fixed no joy. Then downloaded the latest version (2013) the update of the bios for this series and windows 7, 32 bit. When I try to run the update I get the message "this computer is not supported". If anyone can help.

  Try to hold down the F12 key during the restart of the unit. You will see several options on the page that appears. You'll want to install at the bottom. I have the case of the warning you will are you aure you have win 7?

  Most of the time you get this error, or you have a different version, in this case 64 bit? or another OS 8.1 or 10? Take a look at your computer, control panel settings of IE - settings then you can ook at what OS you have and the 32-bit version of or64.

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite Pro S500 - Recover Media Creator does not start

  I got a new laptop Satellite Pro S500. After the initial Setup, I have Windows 7 64-bit work. I wanted to create the recovery media, but the process fails.
  Having started the "Toshiba Recoverx Media Creator', I get a dialog box where I can choose the language for the recovery media. My language is German. So I select German and press OK. For a few seconds, there is an another dialog box with a text "Please wait...". "and after a few soconds, it closed. Nothing happened.
  Any other language in the first dialog box setting cause the same behavior. Even tried in Windows safe mode, but still the same.

  Is there a log file?

  Any help is appreciated

  Hi Caramel0,

  This recovery media creator dialog box does not know me, you can post a screenshot of the error message? This would be interesting.

• Toshiba Satellite Pro S500 i5 or i7 i3 CPU upgrade

  Hi everyone, I'm having 7 Toshiba Satellite Pro S500 Notebooks here and want to update these shit Core i3 330M and 350M, 370 M and 380M CPU for Core i5 or Core i7 CPU. I'm not quite sure what CPU Socket, I have to buy and which generations of CPUS are supported by the S500. I processors up to 380 M Corei3 assembled in these things now and think its a HM55 Express chipset inside which must allow to i5 and i7 processors. I already had problems in upgrading toshiba tecra A9 modells and after upgrading CPU they were running very well and the FAN was blowing ultra noisy at speed of 100% all the time without ever turning off again even if the laptop could be frozen at 0 ° C and it has never been warm. Level 3^rd Toshiba support then told me that he would need a firmware update they do provide customers and was told to send books to repair @ € 50 each, just to update this microcode. So I would ask if anyone has a list of processors supported for the S500 modells?
  Numbers of exact model I have:
  Satellite Pro S500-106 (PSSE0E-19M06SLD)
  Satellite Pro S500-147 (PSSE0E-0HH06SLD)
  Satellite Pro S500-132 (PSSE0E-09G05ELD)

  Hope someone can help, I don't want to end up buying an i7 or i5 cpu, spending 50 dollars, investing 4 hours work and end up with a laptop unusable, I immediately dismantle again just for the work that I had invested... Forward your answers J

  Best thing to do is to choose a CPU provided with one of the other S500 PSSE0E patterns. This way you can be sure the BIOS supports.
  Some portable computers require a cooling system calibration after that another CPU is installed. An ASP can do the calibration.

• Satellite Pro S500-14 t - I would like to upgrade my graphics driver

  Hello

  I want to update my graphics driver since it is a bit old (2010) and a program starts asking for him.

  Toshiba Satellite Pro S500-14 T
  Reference No.. PSSE0E-0LM07QIT
  Serial number. YA175628H

  Intel HD Graphics
  Current driver installed: 8.15.10.2189

  I tried to search on intel.com, but here is the result:
  + A custom computer manufacturer driver is installed on your computer. +
  + The Intel Driver Update Utility is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. +
  + Contact your computer manufacturer for the latest driver for your computer. +

  The search for my PC in the [Download drivers, software patches and other updates for your Toshiba product] result of article in a "drivers not available."

  So my question is: where can I find an update for my graphics driver (if it exists)?

  Thank you

  To be honest I would not update the driver only because the version of the driver is old!
  I would try to update the driver ONLY if I would notice some problems in relation to other applications such as games, etc.

  However, the fact is that the drivers that are released on the page of the Toshiba UE driver are certified by Toshiba. It s recommended to use these drivers.

  If you want to install the drivers from other sources, you can do it at your own risk.
  There is no guarantee that these drivers work correctly.

  Anyway, the laptop supports Intel HD graphic card. This graphical unit is part of the Intel CPU
  http://Ark.Intel.com/products/49020/Intel-Core-i3-370M-processor-3M-cache-2_40-GHz

  The Intel HD graphics card was the first GPU Intel internal and disciple were Intel HD 2000/3000/4000 and 5000 now

• Problem turning on the Satellite Pro S500 without battery

  Hello!

  I have the following situation with my Satellite Pro S500-115:

  The battery seems to be faulty now (it loads more and Win 7 Pro told me to replace it).
  When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  But even if I remove the battery and the laptop connected to the DC IN, when I press the turn on button have nothing happens!

  If the laptop should not be able to operate in such circumstances, which is only connected to the electric network and with the connected battery off? I have to set in order to operate like this?

  Thanks in advance!

  > The battery seems to be broken now (it loads more and Win 7 Pro told me to replace it).
  > When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  My old laptop battery is dead too much 6 years It's possible to use the laptop in the dough mode for just two minutes after the battery is empty, but I use the notebook with the AC adapter connected and that is why I don't need to replace the battery.

  > Shouldn't the laptop be able to operate in such circumstances, that is only connected to the electric network and with the battery connected off? I have to set in order to operate like this?

  Usually the laptop should be able to turn on and operate without battery connected.
  My laptop works fine with an adapter connected only. So what to say maybe the ESF is also affected, but it's just a suggestion

  But you must check if the BIOS is in place to this day... sometimes a BIOS update could solve some problems of power and battery.

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.