Satellite Pro T130 - WLAN stops working on battery

Similar Questions

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro L500 - Webcam stopped working

  The Web camera integrated on my Satellite Pro L500 stopped working with the following message:
  C:\Program Files (x 86) \Toshiba\Toshiba Web Camera Application\TWebCamera.exe

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
  The event log points to microsoft.vc80.openMP.

  Could someone tell me please how to fix the web camera. I use it very rarely, so I don't know exactly when it has stopped working.
  Thank you.

  Hey,.

  What do you think about reinstalling the webcam software? Maybe it will work

  Please see the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just search your laptop model and the available downloads. If you find it, download the new Camera Assistant Software but before you install it, first remove the old version and restart your computer.

• Satellite Pro M70 - mousepad stopped working

  The internal mouse on my Toshiba Satellite PRO M70 pad went dead. The cushion or the two buttons mouse work. It still works with an external optical mouse.

  Is it possible to test the mat mouse internal or re - install a driver for it?

  Hello

  Are you sure that the mouse pad feature is not disabled by using the FN + F9 key combination? Please check this box.

• Satellite Pro c650 - webcam stopped working

  Webcam stopped working, if anyone knows how to solve this problem?

  Hello

  How do you reinstall the webcam software?
  The software can be downloaded from the page of European driver for Toshiba

  By the way: would be nice to know more details on the problem

• TOSHIBA Power Saver of the Satellite Pro M series stopped working. (code 0 x 0)

  The utility has suddenly stopped working after Windows XP update.
  Informed, that there was an irreparable failure and performance of the program will be interrupted.
  Code 0 x 0

  What should do?

  Hello

  Maybe you should download the new version of the powersaver to your machine, remove the old version (go to Add/Remove Applications in your 'control panel' and uninstall) and install the downloaded one.

  You can download the powersaver here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good luck
  Welcome them

• Satellite L350-262 - WLAN stopped working after Windows update

  Hi - help please!

  Everything was fine until an automatic update on windows 7 applied about 14/15 December 2010. After that I turned off the wireless LAN to save battery while off line, then the wire will not pass on, I am currently connected via a cable connection 10/100.

  I tried a restore when this problem first occurred, and it worked. However, the updates have applied new themselevs and I cannot now restore the update that seems to have caused the problem before the date on which took place.

  I updated the driver that the adapter is realtek adapter and I have applied this update - realtek_wlan_win7_20100702, it did not work.

  I ran the diagnostics which indicates the following:-Please note the wireless switch on the before the computer is on, and shows on the page of diagnostic, Diagnostics tool recognizes also when the switch is off, so it doesn't seem to be a physical problem with the wireless LAN switch, but something software related that has disabled the wireless LAN

  Network card diagnostics information:

  Network adapter wireless network connection driver information:

  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Reference of the manufacturer.... : Realtek Semiconductor Corp.
  Provider of...: Microsoft
  Version...: 6.1159.323.2009
  INF file name... . : C:\Windows\INF\net8187bv32.inf
  Date of the INF.... July 13, 2009 20:46:35
  Name of the section.... : RTL8187B.ndi
  Hardware... ID: usb\vid_0bda & pid_8198 & rev_0200
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType...: 71
  Type of physical support...: 9

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Connection incident diagnosed

  List of visible access points: 0 item (s) total, 0 article (s) poster

  History of connection

  Information for Auto Configuration ID 1

  List of visible networks: 0 item (s) total, 0 article (s) poster

  List of favorite networks: 0 item (s)

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  For all the info on this session, see the event information of wireless connectivity.

  Helper class: Auto-Configuration
  Initialize status: success

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Result of diagnosis: problem found

  Root cause:
  WiFi is disabled

  Detailed root cause:
  Radio is off (SW switch)

  Repair option:
  Turn on wireless capability

  Network Diagnostics log
  File name: 3E316BFA-A7C3-496A-8FF9-810B3E247842. Diagnose.0.ETL

  Collection information
  Computer name:
  Windows Version: 6.1
  Architecture: x 86
  Time: Wednesday, December 29, 2010 08:56:08

  Anyone has any ideas I would be very grateful, thank you

  Hello

  as I remember, there was the user with the same question in this forum. I don't know if he could solve it... I recommend:

  1 remove all WiFi drivers installed on your system and restart the round, then. Afterwards, go to the driver page and download wlan driver http://aps2.toshiba-tro.de/wlan/?page=downloads
  2. If it still does not, restore to previous operating system

• Satellite Pro L40 - has stopped working and will not start

  Nothing happening, no spark of life, even if it is plugged to the mains. I have ALL of my info stored on it, including their e-mail addresses...

  (1) is it the battery?

  (2) it is likely that it might be corrected?

  (3) if irreparable, can data be transferred from a laptop dead to another PC or Mac Book of my partner?

  Thank you very much for taking the time to read and thanks I advance for any help, you can be so good as to provide...

  Toni

  Hello!

  Normally, if the boot of t computer doesn't and you can see anything on the screen it s a hardware malfunction, maybe the motherboard needs to be replaced.

  But in your case, I'll try this:
  Remove the AC adapter and the battery. Wait one hour, then reconnect the two devices. Try to start the laptop.

  If it doesn't work, you need to contact a service provider for help. They can check the laptop and determine the cause of this problem.

  And your data, you can easily without danger on the other computer. Just put the HARD drive in the external HARD drive enclosure. You can then connect the HARD drive to another laptop to backup data.
  But normally all data should be backed up already! ;)

• Built in mic has stopped working on my Satellite Pro T130

  Dear Forum,

  the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

  It captures the white noise.
  But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

  Can't bring any changes to the software that could influence.

  What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
  And of course, it is not set to mute or upgraded to the bottom.

  Still no cure.
  What's next?

  Thanks much adavance.

  Hmmm, it makes a static noise? Kinda sounds like hardware related issue
  But check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port.
  The internal microphone must be turned on!

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
  Check this box

• Satellite Pro A210 periodically stop the monitor

  Hi, my computer laptop Satellite Pro A210 periodically stop his monitor. I can work now what, whether it seems no matter what I do, the monitor turns off just.
  I checked the Device Manager and there is no device showing conflict. I bought the new laptop about six weeks ago and it is very annoying that it does. Anyone had similar problems with their A210?

  I contacted Toshiba and I hope that they will be committed to fix my laptop.

  Thank you.

  This is very interesting thread because I m the owner of a Satellite A210 with dual OS (Vista and XP) and didn t notice such problem with XP or Vista.

  Of course, the screen goes black after a while but this is related to my energy saving settings. I ve set the power of my wide display settings to save power while working on the battery.

  I don't know if this could be the reason for your question, but it's certainly an option m.

  You can also try to update the BIOS and the graphics driver to check if it would help solve the problem you also.

  Good luck to you

• Satellite Pro T130 - Canoe turn on 3G WWAN

  Hello

  I have a Satellite Pro T130, Win7 Pro 64

  I had a few problems with the Ericsson F3607gw connection, and I was wondering if this is the right place to search for answers.

  1 to 3G _ RF _ power problem

  If I update to 1.4.0.10 then I can't turn on the 3G radio. There is no hardware on the laptop switch and using the software switch Fn + F8 has no effect on switching the radio on or off, it remains off. Rear winding to the power utility earlier (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  Problem 2 - Ericsson driver with ConfigFree

  I've recently updated the driver package from Ericsson of R4C02 to R6A06 (Ericsson driver version 1.5.0.5). After doing this, the Ericsson 3 G connection no longer appears in the list of devices in ConfigFree! It's a bit annoying, because I can not include 3G (which I use a lot when they travel) in one of the profiles ConfigFree more. I have enable/disable the 3G connection by accessing the control panel and by using network connections.
  I upgraded 8.0.23 ConfigFree 8.0.27 but this did not help.

  If I missed fixes for these issues, I would be grateful if someone could point me in the right direction.

  Thank you

  Hello

  AFAIK the ConfigFree software is diagnostic software and cannot be used to set up the 3 G or WiFi.

  > Rear winding for the previous electricity utility (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  If you have any problems using the old version, then you should stay with a good running version.

  This is a Toshiba 3 G portal:
  http://APS2.toshiba-tro.de/WLAN/index.php?page=3gdownloads

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Satellite Pro T130 - unable to wake from mode 'sleep'

  I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.

  After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.

  Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.

  Thanks in advance.

  You have already started a thread on the same topic here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=222143

  Please follow the first thread to prevent certain misunderstandings

• Toshiba Satellite Pro T130 w / Windows 7 Home Ed - Dynadock U10 does not

  Any help is appreciated here.

  Recently purchased a new Toshiba Satellite Pro T130 laptop and a Toshiba Dynadock U10. Laptop has Windows 7 Home Edition is installed.

  Want to Toshiba to bind in Dynadock for wired keyboard, VGA screen, mouse. Installed software Dynadock and get and 'incompatible pilot' error no message - no indication of which, although. Computer laptop seems to be docked, however impossible to get VGA to work.

  I tried to install on a Lenova Thinkpad with Windows XP and it works fine with this, but not her own brand of Toshiba?

  Thank you

  Have you used the latest version of the software ""?
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 29 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 29 & driverLanguage = 42]-W7 32
  and for 64 bit
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 30 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 30 & driverLanguage = 42]