Toshiba Satellite Pro T130 w / Windows 7 Home Ed - Dynadock U10 does not

Similar Questions

• Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

  I have read all the info out there and tried many things including using the provided by Toshiba, Vista recovery disks

  I can't go down the screen of boot error, although no matter what I try.

  Is my drive into two partitions, and I am ready to sacrifice one of them if necessary to get the computer to boot.

  Is there a way I can enter directly into the computer and reinstall windows?

  I'm not a pro, then simple instructions are the best.

  THX

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What are the troubleshooting steps you tried to solve the problem?

  3. the problem occurs in safe mode?

  4. don't you try to do the Startup Repair?

  I suggest you try the steps from the link below and check if it helps.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows: http://support.microsoft.com/kb/927392

  Hope this information is useful.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Upgrading Toshiba Satellite PRO C for Windows 8 with DVD

  Hi all!

  I tried to upgrade to Windows 8 PRO with the DVD provided with the laptop but cannot achieve this goal.

  I made the changes in the BIOS as the said document (CSM boot for a UEFI boot and enable Secure Boot), started the laptop with the DVDs, but after running for a while, it stops and show a message saying something like there is not enough space in partition to write the image o something like that. Sorry because I don't have the exact message. Any ideas on this subject?

  Fortunately, I did the DVD to recover for the restoration of Windows 7, but I would like to run Windows 8 in the laptop.

  Kind regards.

  Javier.

  If I m not wrong not the message means that the partition does not provide sufficient space to install the system Win 8.

  I think you need to format the partition before you begin the installation of the system.
  This option should be given during the installation of the OS, I can not say with certainty what stage should provide this option, but this should be asked at the beginning of the installation

• Windows xp home edition product key does not work in windows xp service pack 3 clean install from a disk streaming drag.

  I have a home edition of windows xp but slip listened to SP3, the installation when it asks for the product key, I enter my windows xp home edition original product key, but he says that this key is invalid, please check that you have not done it and try again

  If your key is issued for SP3, then it is possible that slipstraming does not include the update to recognize th ew SP3 batch of authorized keys.

  It is also possible that you used the wrong type of disc for the base of your wake - if the key is an OEM, you must use an OEM for installation and same disc, a disc of detail for a touch of detail.

• Windows 7 Home Basic: custom Option does not appear

  I have windows 7 home basic when I right click on the desktop customization option does not appear and I can't change the color of my task bar.pleaase help me

  Hi Matrix

  Missing customization is normal because Windows 7 Home Basic Edition does not support themes. See the following article for an explanation.

  The "Customize" option is missing from the drop desktop on Windows 7 Home Edition basic

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

  New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

  After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

  You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I have Windows 7 Home premium and it does not allow me to set up the desktop remotely

  When I try to put in place, the remote assistance applet appears, but there is no options for me to allwo remote desktop, the lower part of the cmdlet where it normally shows the options for remote desktop is completely empty. What can I do to configure or repair it?

  Hello

  I wish to inform you that you can launch Remote Desktop connection in any version of Windows 7, but you can't connect to a computer with Windows 7 Home Premium. I would like to go you through the link for your reference.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  If you have other questions related to the issue, then I suggest you to publish the query on the Technet forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Let us know if you have any additional questions.

• Updgrade of Windows 7 Home Premium to professional does not work.

  Just purchases Anytime Upgrade for Windows 7 upgrade Home Premium to professional.  I had an a message which the "upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade."  Just pay $130.00 to the Windows store for something that does not work?

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows Vista Home Premium 64-bit does not have a nucleus? What are contiguous with 32-bit?

  I read some information about windows vista. Is Somethins I read several times: "while all editions of Windows Vista can support processors multi-hearts, only Windows Vista Business, Ultimate, and Enterprise can support dual processors."

  So my processor AMD dual-core or a quad-core is not used or recognized by Vista home Premium 64-bit? What 32-bit?

  As for Intel?

  Thank you.

  Think catch.  The chip in the socket is called a physical processor.

  Vista Home Basic and Premium can use a.  Any number of cores is OK.  Carrots

  are called logical processors.

  Vista Business, Enterprise and Ultimate can use two jacks.  Number any of

  cores of each is OK.

  Only the editions of Windows Server can use 4 processors and up to.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a toshiba satellite A15-S 127 my wireless connection or the light does not come on when I try to connect

  even when I turn on my wi - fi I get no light, so when I search a connection it dosent show any wireless connection, how can I know if I have even a wireless card?

  Hello

  1. were you able to connect to the internet wireless with no problems before?

  2 have you made changes on the computer before this problem?

  Check the status of the NIC in Device Manager and send back the same.

  The following articles may be useful:

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows Vista Home Premium System Restore does not work

  I didn't my laptop another year.  But whenever Vista does not turn right... too slow or what not I try and create a restore date to solve these problems, but whenever I do it always returns he tells me, "that system restore could not completely finished, so your files have not changed."   I'm so tired of NOT being able to fix my computer and it works fine!  Can someone please help?

  "But every time that Vista does not turn right. too slow or what not I try and create a restore date to repair these... »

  You can't do a restore point for the last week, today.

  You can do a Restore Point for today, so that next week, if necessary, you can restore to today.

  Think about it: How can you make a Point of restoration today something happened in the past.

  You should have in the past, if space allowed in SR, to come back to today.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro T130 - unable to wake from mode 'sleep'

  I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.

  After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.

  Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.

  Thanks in advance.

  You have already started a thread on the same topic here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=222143

  Please follow the first thread to prevent certain misunderstandings

• Satellite Pro T130 - WLAN stops working on battery

  WLAN in Toshiba Satellite Pro T130 will not properly work on battery
  Toshiba Satellite Pro T130 with Windows 7-64 bit

  My Realtek RTL8191se card stops working when the notebook computer is on battery power. Everything is OK on the socket. On battery it works OK for a few seconds/minutes and then drop connectivity. The driver is 2015.1.427.2010 - the latest version.

  I disabled the settings related to energy-saving WLAN cards.

  Any ideas on how to find the cause of this problem?

  Thanks in advance

  Chaouki

  Hey Buddy,

  Well, generally, I would suggest that you should disable Windows in energy saving power management feature, but you have already done this... Make sure that this power WLAN economic option is set for maximum Performance, even for the battery mode and all power profiles!

  And what BIOS up-to-date? You have the latest version of the BIOS installed or using an older version?

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?