Satellite Pro U400-142 - can't get Draft N to work

Similar Questions

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

  The other day I uninstalled many programs standard of his Toshiba Satellite U400 - 13G, because it has been very slow in implementing.
  But now I realized that his FN hotskeys does not work.

  I tried to look in the support forum and the list of drivers, but I can't find the answer.

  So the question is what program/driver should I install to get the keyboard shortcuts to work again. It is running vista 32 bit.

  Best looks Anders vangsgaard

  Hello

  Well buddy. For the future I'll give you a tip ;)
  Never remove any parts/software if you n t know what they are for ;)

  The Satellite Pro U400 - 13G seems belongs to the PSU45E series.
  Choose this model number to download driver form Toshiba Europe.
  Then download the package of value added.

  To reinstall this PPV you will need to remove the preinstalled old VAP.
  Do it and after rebooting again to install the new downloaded package added value.

  In my view, that the FN buttons should then work.

• Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

  I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

  PLEASE CAN SOMEONE HELP? Thank you

  There is no special driver for microphone.
  Audio driver controls the microphone and the noise.

  By the way: what mic do you mean? The intern who belongs to the webcam?
  Only the microphone is working correctly by using an external headset?

• Satellite 1800 Windows XP - can't get Ethernet/LAN to work

  Hey everybody,

  I am struggling with this for hours...
  I installed windows xp on this old laptop, Satellite 1800 PS181C, and I can't get the drivers to work for ethernet can work

  It worked fine when I had windows 2000 on it, but as the OS crashes constantly, so I opted for XP instead.

  In Device Manager, it lists the network adapter under 'hidden features' for a reason, it is called "Intel 8255 x-based Fast Ethernet.
  It is said there is a driver installed for it, but when I try to create a new internet connection, it tells me that no adapters are installed!

  I tried the site LAN driver, the last that appears is for windows 2000, I tried anyway according to the installation instructions, didn't work at all

  I watched the driver on the Intel Web site, she me tied to a PROWin32.exe file, I tried to install, it says I have no card compatible?

  This leads me into the wall. There must be a way to make this work.

  Help is very appreciated!

  Thank you

  Can you please send the exact model laptop (1800-xxx) name?
  What WXP version do you have installed (service pack)?
  Have you consulted the Toshiba download page? This model is supported for Windows XP Home edition?

• Satellite Pro L10: where can I get a better graphics card

  Hey

  I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

  Thank you very much

  Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

  Good bye

• Satellite Pro L350 - where can I get the new BIOS?

  I downloaded the new BIOS - 1.60 for Satellite Pro L350 and it generates an error saying "This BIOS is not for your laptop".

  Where can I get the new BIOS - 1.60 for * PSLD0E Satellite Pro L350-154-02601WS4 *? Thank you

  Hello

  Are you sure that you have a Satellite Pro L350 PSLD0E?
  The series PSLD0E is a Satellite L350 (not Pro).

  But the BIOS update, you can find the Toshiba site.
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• Satellite Pro L100: How can I get around the startup password?

  Hello

  We have a Satellite Pro L100 PSLA4E and unfortunately, a startup password has been entered that we do not know. Does anyone have ideas how we can get around this?

  Thanks for your time, any ideas are greatly appreciated.

  BEAK

  Hello

  If you mean the BIOS password, then I have some bad news for you.
  If the BIOS password is not known to you, you can't bypass the password.
  This can be done by the partner of service authorized in your country.

  Just ask the guys for a helpa? ¦

• Satellite Pro A300D - where can I get driver ceiling microphone?

  I have a Toshiba Satellite Pro A300D. I upgraded to Windows 7 from Vista, but lost my Toshiba built in software while doing so. I can access my webcam via applications such as Skype, but my microphone no longer works.

  Where can I find the driver for the webcam/microphone software that I had before the upgrade?

  Hi PyroTails,

  The built-in mic is part of the webcam, which means that you need to download the driver for the webcam that you can get here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  After installation, it should be possible to use the internal mic. :)

• Satellite Pro 4600: How can I get my wireless to turn on?

  EIS,

  Sorry to ask the most basic questions, but I just inherited a Toshiba Satellite Pro 4600, on the back side of the laptop, I have the following information:
  CEL 750 / 128 / 20 GB / 14T

  On the left side of the Panel, there is a wireless - switch this switch, how can I get the built in wireless to work please?

  Thank you.

  Hi mate,

  Firstly: are you sure that you have a wireless card installed? This is the first question and perhaps the most important of them. Not every Satellite 4600 has been bundled with a wireless card and a switch wireless on the left side says nothing.

  I know it s hard without technical knowledge, but what you can do is download the drivers from the Toshiba Drivers and Downloads 'Archive' wireless, turn on the wireless switch and check if some materials are recognized. If Yes, then welcome to the wireless world. :)

  Would like to hear some comments from your part Thx.

• Satellite Pro A200 PSAE1E: Can't get the shortcut keys don't work on Win XP

  Hello

  I have a Satellite Pro A200 PSAE1E that came with Vista on it, I reinstalled Win XP Pro installed with relevant drivers download Toshiba page but cannot get working shortcut keys.

  I installed the controls and the driver, but that doesn't seem to work. Saw an ad on "common module" somewhere, but can't seem to find any links to download on the download page.

  Can anyone help?

  Thank you very much

  Iain

  The control utility and driver controls allow you to customize and TOSHIBA special button preset settings. But it is not a FN keys!

  You must install the Hotkey utility if you want to use the FN keys.

  Another tip:
  It is important that all Toshiba drivers and utilities are installed in the correct order.
  On the Toshiba driver page, you will find a txt file called installation instructions.
  Please install all drivers and tools in the order mentioned in this instruction!

  Greetings

• Re: Satellite Pro A100 PSAAPE - can't get to POST 4 GB on board

  Tried to upgrade RAM from 1 GB to 4 GB.

  I use the pair of Kingston KVR533D2S4 / 2G (2 Gb PC2 - 4200 CL4 200 - Pin SODIMM Modules).

  However, I can't the A100-PSAAPE post with 4 GB on board.

  It works well with a single module (in each slot) and pointed out 2 GB of RAM.

  TOSHIBA knowledge base makes the following reference:

  * Requirements for the use of 4 GB of main memory *.
  + The BIOS must support the memory remapping feature. +
  + The memory remapping feature allows for the segment of system memory which was already crushed by +.
  + PCI configuration space to be remapped above the 4 GB address line. +
  + The newer BIOS versions support this feature. +

  * _My Questions_ *.
  Someone at - it PSAAPE A100 running with 4 GB on board?
  Does anyone know if an update of the BIOS can do the PSAAPE A100 accept 4 GB?

  Hello

  As far as I know, the Satellite Pro A100 was equipped with Intel 943GML Express chipset.
  This chipset supports the same specifications as the chipset Intel 940 GML and chipset theis max 2 GB of RAM.

  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  If mobile cannot be upgraded up to 4 GB of RAM to 2 GB only

• Satellite Pro L100 - where can I get a battery?

  It gives me an error on the battery indicator that the battery needs to be replaced
  Where can I get a battery

  New battery can be ordered from Toshiba ASP (certified partner).
  You can also loom for a battery in the internet.
  Remove the battery from the laptop and there should be a label with the part number.
  Look for this part number in internet to find compatible battery.

• Satellite Pro L40 - I can't get any software download

  I had to use the Toshiba product recovery disc but now I can't get any software download, everytime I try all I get is unknown Publisher!

  Can someone help or advise me what can I do to solve this problem, thanks

  Hello!

  To be honest I n don't know what you mean.
  What software are you trying to download and where to download them? What OS do you have?
  Can you post a screenshot screen or something else?

  I put t know what internet browser do you use, but I still use Firefox and never had any problems with this browser.

  Good bye