Satellite Pro U400 - error Webcam driver

Whenever I boot, I get an error message saying that there is a problem with the driver for web cam - words in this sense.
How can I reinstall these drivers?

Hello

First of all, you need to remove the webcam of windows operating system software.
You can do this in Control Panel-> software
You have to find Chicony webcam software.
Remove it, reboot the system, then clean it using CCleaner (freetool).
After reboot again install the webcam software again once you have downloaded from the driver page.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro A300 - error - webcam driver open failed

    Hello

    I have the Satellite Pro A300
    The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

    Any help

    Hello!

    I used the forum search and founded a good display of user Akuma.
    Maybe it's the s solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

    Good luck!

    Good bye

  • Satellite Pro U400 - Web cam driver probem

    Hello

    Recently I bought the laptop Satellite Pro U400 series. Currently I am faced with a real problem with the webcam integrated. When I start my laptop, first it works and then after some time when trying to close and reopen it gives either of the below error messages
    "graphics make it fail."
    'driver open webcam fail, restart '.

    I try reinstalling the webcam Assistant software, but the problem still persists.

    A facing this kind of problem and if you know a solution, please tell me.

    Concerning
    Jesu

    The error message is known to me
    I think reinstalling webcam software and Vista update should contribute to this issue.

    So how to proceed;
    First remove the old webcam software.
    Then clean the operating system using the CCLeaner
    Then update the Vista of the State (you must restart the operating system several times)
    Then, download the new webcam software, unzip it and reinstall it.
    Restart the computer and check if the same error would reappear.

    Welcome them

  • Satellite Pro U400-130 - hard drive Partition - help

    Hi all

    I recently bought a Toshiba Satellite Pro U400-130 mobile - cell PSU45E-005005EN

    Processor Intel Core 2 Duo (T8400) 2.26 GHz, the front side Bus speed: 1066 MHz, level 2: 3 MB Cache
    3072 MB (1024 + 2048 MB) DDR2 RAM
    250 GB hard drive
    Microsoft Windows Vista Business Edition

    What I've found, is that the hard drive is partitioned into two separate drives

    1. the drive C - 117 GB - hand player - all programs, user accounts and files of work / are saved on the C drive.
    2 drive E - 113 GB - A folder titled HDDRecovery (size 4.42 GB) nothing elese is on the E drive.
    3. This only totals to 230 GB, then where is the other 20 GB?

    I want to know/how is is:

    1. Why are we doing this way?
    2. What is the purpose of the file recovery Drive E and it does not require the space of 113 GB?

    3. If I increase the size of drive C to say 55GO and decrease the size of drive E?
    3.1 is it possible?
    3.2 what impact will?

    4. the drives C and E only total 230 GB so where is the other 20 GB?

    Can someone please help

    Thank you very much

    Vash01

    (1) the HARD disk is partitioned into 3 partitions and not 2! Go to the disk management utility and you will see that there is a hidden partition. This hidden partition is created by Vista. It contains the necessary backup files that are needed for the repair of the system, if something goes wrong with your operating system.

    (2) the second partition contains the record of recovery of HARD drive that allows you to retrieve the laptop without using recovery discs. But of course, you are able to create a recovery disk and it s highly recommended to create a recovery disk using the preinstalled Toshiba Recovery Disk Creator.

    3.1 I think that this could be possible, but before that you'd change any partition size I recommend the creation of the recovery disk because there is a high risk that after changing the size of partitions you drive HARD recovery option does not work.

    3.2) see point 3.1

    4.) I think the other hidden partition using this 20 GB. Also please note that 250GB are not really 250 GB 1 GB is not 1000MB but 1024MB.
    This means that the 250 GB HARD drive is not 250 000 MB but 238 418 MB

  • Satellite Pro A300-1NH - Webcam driver open fail

    Tried to work with my camera, but the error appeared "Webcam driver open fail. "Please restart camera or computer" tried to do both, nothing happened. Drivers modified for camera, the same problem.

    My OS is Windows XP SP3. Can someone help me?

    HI rinat_1,

    Your Satellite A300 has been bundled with Windows XP? If not, try it with settings of factors once again, please!

    Also make sure that your BIOS version is the most recent and you can get it here:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

    Good luck! :)

  • Satellite Pro U400 - 13G: Modem driver installation failed

    Hello

    I tried to install the drivers for my modem provided by toshiba, but after the execution of the installation utility installation said installation faild.

    I also tried to use drivers provided by driveragent.com, as well as Windows Update, the same result.

    None of the drivers I have tried works, IV ' e even tried to look up the ID of material on google, same result.

    Anyone got any suggestions?

    Hello!

    Try to install the drivers manually in the Device Manager > update driver. Maybe it works.
    Download and install the latest driver for your laptop from the Web from Toshiba website.

    The hardware ID, you can see on this site:
    http://www.PCIDatabase.com/

    If doesn't work, you should try to update the BIOS. Search on the Toshiba site for an update.

    Good bye

  • Satellite Pro U400-G13 - "C++ Runtime Error" at startup

    Hey the Toshiba Forum users

    I just bought a Satellite Pro U400-G13
    I turned on and the auto install startet Windows Vista. The inexplicable to the computer.
    After the reboot, a toshiba program starts and requested a restart more.
    After that, I have a "C ++ Runtime Libery Error ' whenever I start the computer.
    If I press OK, the screen goes black in 1 second and the error shows up again.
    It gets to a screen "Please wait" screen to sign in to Windows.

    I can start it in Mode safe, but do not really know what to do with this...

    Y at - it someone who has tried something similar or has good ideas for what I can do...

    Many greetings Asger Benzon

    As Akuma said, have you installed extra RAM? Remove the extra RAM and try without it.

    In your position I would like to reinstall the OS (Operating System). Backup your data first, because everything on the HARD drive will be erased.
    After this, start Notepad, and then press F8 or boot from the recovery disc. Then you can fix the computer. Windows will be reinstalled.

  • Question on the infrared driver for Satellite Pro U400 - 12 p

    I downloaded the infrared driver for Satellite Pro U400 - 12 p
    When I run the Setup, I get an error that says "the installation of the windows package file is not complete" or something like that.

    Anyway, he said that the Setup file is in ruins. Tried downloading it several times.

    Hope I have posted this question in the right forum.
    Thanks for help.

    When you download the driver to extract it to a folder created on your desktop. From there start the setup.exe file. It should work.
    Have you done the same?

  • Satellite Pro U400-153 - replacement HARD drive

    Hello

    I need help with a new hard drive for the Satellite U400-153. My wife and I have a laptop (canada) U300 as well with a hard drive of 160 GB and a laptop U400-153 (europe) with a 120 GB HARD drive. I wanted to put the larger HARD drive in the U400 but the screws that hold the HARD drive in the laptop are closer together on the 160 GB HARD drive as this 120 GB HARD drive and so I can plug the HARD drive, but I can't replace the casing on the bottom of the laptop. I want to upgrade and put in a new HARD drive, but I can't seem to find any info on weither all readers will be the right size. will be the screws on this form? How will I know

    http://www.ebuyer.com/product/219414
    MK3265GSX Toshiba 320 GB 2.5 "hard drive SATAII 5400 RPM 8 MB Cache - OEM

    Does it matter what company it comes? I thought I got it was weird that the Satellite U300 would not transfer more easily.

    If anyone has any ideas please let me know...

    Thank you

    Hey,.

    Theoretically, you can install each HARD drive with SATA 2.5 form factor interface in Satellite Pro U400.

    If you install a new HARD drive in Satellite Pro U400, you must use the old disk cover/case HARD to install.
    I put t know what you mean exactly with that, but maybe you can upload a photo to make it clearer.

    Finally and above all it doesn t matter what company it comes. You can use a Toshiba or another company HARD disk too like Western Digital, Seagate, etc..

  • Satellite Pro U400 - 24 - crack appeared in the frame above the DVD drive

    I have a fairly new Satellite Pro U400 - 24 hours (seven months), where a crack appeared just above the DVD drive, close to the screen where the slot ends. I know for sure that I havn't dropped it, so I just want to know if it is a problem that everyone knows? If the framework becomes fragile due to heating (it's pretty warm when he must preform)

    Hey,.

    I put t really know why this happens, but on my Satellite U400 I couldn t notice such a problem. I have a year now and it works perfectly and the case doesn't have a crack or something.

    In my opinion, you should contact an authorized service provider. Guys can order a new replacement part and swap it for you! :)

  • Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

    I have the Satellite Pro U400 - 12 p.
    I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
    Now, Conexant driver does not work.
    Just as it should, even tried downloaded the 32-bit Version.
    None.

    It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
    The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

    Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

    So, what's the problem?
    * The problem is the Microphone does not work! How can I make it work? *

    Please, help me, I am a student, and it takes a lot for studies.

    Thank you much for the help.
    NIR.
    .

    Hello

    It is not easy to say why this is happening.

    Maybe the facilities is order wrong. I send you the facilities for U400 command.
    Try please install all the drivers, tools and utilities following this order of installations.

    Windows Vista SP1
    KB941833
    KB941833
    Module of Chipset Intel (r)
    Intel (r), Robson (iMSM Driver of Intel)
    Intel Crestline-GM / UMA Drive
    or
    AMD M82XT /M86 driver
    Audio driver Conexant CX20561
    Driver LAN Marvell 8040/8055
    Synaptics Touch Pad Driver
    Alps Touch Pad Driver
    Conexant Modem driver
    Modem region Select utility
    Driver Intel LAN wireless Golan/Kedron
    Intel Proset utility
    Atheros Wireless LAN driver
    Realtek RTL8187B Wireless LAN Driver
    Chicony camera software
    Bluetooth Stack for Windows by Toshiba
    CIR Port driver
    TOSHIBA Value Added Package
    TOSHIBA hardware configuration utility
    TOSHIBA supervisor password
    TOSHIBA SD Memory utilities
    AuthenTec AES1610 fingerprint utility
    TOSHIBA ConfigFree
    TOSHIBA WPS library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer
    Toshiba HDD Protection
    TOSHIBA face recognition
    TOSHIBA TRS driver
    HDMI Control Manager

    Please post the result.

  • Re: Need driver XP SATA/RAID for Satellite Pro U400

    Hi all

    I've searched and searched, but I can't for the life of me find suitable driver to install XP on my machine. It came pre-installed with Vista which is useless to me because of the instability, bugs, just be a poor OS. I got the new laptop for a week now and have not been able to use again, so it would really appreciate someone pointing me in the direction of SATA/RAID drivers for XP.

    Thank you!
    E.g.

    Hello

    The Satellite Pro U400 needs a SATA driver, and you can find it in the Intel Matrix Storage Manager package.

    This storage manager can be downloaded from the European driver Toshiba page (see the series of portable different) or you can also download it from the Intel site.

    The SATA driver must be installed during XP Setup process. You must press the F6 key to include a 3rd party (SATA driver) from the external USB floppy drive.

    If you don t have a floppy drive, then you could create a clean XP CD with SATA driver. NLite freeware software can be useful for these jobs

    My advice is; Google a bit for nLite for more details.

    Good bye

  • Satellite Pro U400: Is it possible to automatically turn on webcam

    Is it possible to activate the webcam automatically face a silent picture when you start the laptop without the user knowing?

    Laptop: Satellite Pro U400
    Windows XP.

    Thank you.

    As far as I know that there is no such option in Camera Assistant Software.
    Does anyone use your laptop without your knowledge? ;)

  • Need driver for Satellite Pro U400 PSU413 wireless

    Hello

    I have a satellite Pro U400, PSU413. He recently a blue screen is dead and has since had to be formatted and reinstalled.

    I have a problem with the installation of the wireless drivers.
    Those listed in the section downloads for this model does not work and the user of the laptop will be lost without wire.

    The file to download from the toshiba site is http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fwlesslan-20080530073920.zip

    I have downloaded/extract and run installation, I also tried to install the driver manually, but windows is not interested.

    Any ideas?

    Thank you

    Thanks a lot for the comments

  • Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

    I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

    PLEASE CAN SOMEONE HELP? Thank you

    There is no special driver for microphone.
    Audio driver controls the microphone and the noise.

    By the way: what mic do you mean? The intern who belongs to the webcam?
    Only the microphone is working correctly by using an external headset?

Maybe you are looking for

  • Video recording

    I jst got the Touchsmart IQ816t. I would like to put some of my old VHS video to DVD. Can anyone tell if that's possible with the Touchsmart. I tried to go into the coaxial video input from an old VCR in the Touchsmart, but I got was static. I tried

  • Laptop computer overheating

    I have a pavilion dv1207 us laptop. I had a problem with it stop on its own. Last night, I noticed that I do not hear a fan blowing, should I hear she blows and where is the fan or fans located.

  • MacBook Pro keeps freezing after update to Mountain Lion

    I've recently upgraded to Mountain Lion since Snow leopard. I use a late 2008 Macbook Pro. Since the upgrade, I'm randomly crashes when you use most of the applications (logic x, VLC, QuickTime) it also freezes when using Mozilla. When it freezes I d

  • HP 630 Wiresless does not!

    It came with Windows 7 Ultimate 64-bit as OS and I then upgraded to 8.1 64-bit Windows and for some reason, the upgrade has deleted drivers ethernet / wireless. I downloaded and installed the two files, but one thing is that the wireless key F12 does

  • HP-15 N201ax: how to connect my laptop to an external monitor

    I have a pavillion n201ax... m video editor... I need to connect the source monitor second monitor) to my laptop... I hav tried many things but its not detecting don't not the external monitor... Please help me my laptop has hdmi... I HAV connected h