Satellite U400 - 10 M - XP Pro facilities failed

Similar Questions

• Satellite U400-10J - Toshiba Recovery Disc Creator fails!

  I just bought a Satellite U400, and when I try to create the recovery with Toshiba Recovery Disc Creator program disc, I get an error message: "cannot find the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  I haven't changed anything on the HARD drive! How can I create my recovery disk?

  I did a lot of experiences with Vista preinstalled fees and this message is the folder with the recovery image is missing. Is the folder and the data is gone.

  Are you sure you didn't do anything? Has anyone further access to your laptop?

• Re: Satellite U400 - failed to start the system recovery

  I have a Satellite U400-PSU44E and Windows Vista Home Premium 32-bit preinstalled and having some problems with my computer, had decided to use the hidden partition on the hard drive to fix the system.
  I chose 'Repair your computer' (or something similar to this), but having done, a message tells me that,

  "The installed program cannot start. Click OK to turn off the computer. »

  I don't know why that is. Can anyone help? It would be greatly appreciated.

  The Partition Recovery seems to be defective. You can order the replacement of Toshiba recovery disks. Which country are you?

  Another possibility could be that the HARD drive has failed. in this case, you will need to send the system to an ASP for repair.

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Satellite U400-PSU44E - problem with XP drivers

  Hello
  I have the Satellite U400-PSU44E. It was the Vista Home Premium pre-installed spirit, but I had to install XP Pro.
  Under XP I have problem with installing the drivers. If I try to install driver sound I get info that the media is not found, even with the modem driver. I tried to install the electricity utility of Eve - in the last step of the installation, I get an error, and this error ia´m getting always ia´m try to uninstall this version adding utility / Removo programs.
  HARD drive protection utility I also install the Cana´t - I Dona´t don't know if this feature is supported in my Toshiba, but if this pilot is being Satellite U400 PSU44E I think it should be.
  ChipSet drivers and BIOS I installed as the first.
  I downloaded only the drivers from the web site of Toshiba (ce.computers.toshiba...) for win XP.

  Any suggestions?
  Please, please, help me!

  PS: is there some suggested order of installing the drivers for this model?

  Post edited by: helpfinder

  null

  Hello

  I n t have U400 cannot say much about it, but if you want to have good facilities order here it is:

  1 Windows XP Service Pack2 (RTM)
  2 Service Pack2 (RTM) VALUEADD folder
  3 SUPPORT Service Pack2 (RTM) folder
  Microsoft Internet Explorer V6.0 (SP2) 4
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  7 Windows Movie Maker V2.1.4026.0
  Module 8 SLP OEMSLP2.0 (523759)
  9 Microsoft .NET Framework V1.1.4322 (SR1) V1.1
  10 Microsoft .NET Framework V2.0 V2.0.50727.42
  11 Sun Java 2 Runtime Environment V1.6.0_03
  Module of Chipset Intel (r) 12 V8.3.0.1014
  13 Intel iMSM Driver V7.8.0.1012
  14 Intel Crestline-GM / UMA Driver V6.14.10.4096
  or
  14 AMD M82XT /M86 Driver 8.452.2 - 080130 a-059240C
  15 Conexant CX20561 Audio Driver V3.47.1.0
  16 Marvell 8040/8055 LAN Driver V10.51.3.3
  17 Synaptics Touch Pad Driver V10.1.7.0
  18 Alps Touch Pad Driver V6.0.305.11.1
  19 V7.70.00.00 Conexant Modem driver
  20 modem region Select utility V2.2.3.2 (RST223MAC02)
  21 Golan/Kedron Intel Wireless LAN Driver V11.5.0.32 for XP with cat
  22 Intel Proset utility for XP V11.5.0.0.3
  23 Atheros Wireless LAN Driver V7.4.2.75
  24 Atheros Client Utility V7.0.1.70
  25 Realtek RTL8187B Wireless LAN Driver V5.1116.1226.2007
  Camera Chicony 26 V6.2.238.1217 software
  Bluetooth Stack for Windows by Toshiba V6.10.02T 27
  28 TOSHIBA SD Memory utilities V1.8.1.1
  29 Authentec AES1610 Fingerprint Utility
  Toshiba TrueAcess Manager Suite V7.9.0.4 (20080229)
  V2.00.01.00
  30 TOSHIBA ConfigFree V5.90.08
  31 TOSHIBA help V1.03.00 upd4
  32 TOSHIBA Speech System V1.00.2514
  33 CD/DVD Drive Acoustic Silencer V1.00.008
  34 Toshiba HDD Protection V2.0.2.3
  PC Diagnostic TOSHIBA 35 tool v3.2.6:
  36 TOSHIBA Touch ED V3.0.1.0
  TOSHIBA Hotkey Utility V3.0.1.0 37
  V3.0.1.0 utility TOSHIBA 38
  39 TOSHIBA Control Utility V3.0.1.0
  40 Toshiba Power Saver V7.04.02.Q
  41 Toshiba zooming Utility (smooth view) V2.0.0.24c

  Install all the necessary stuff following this order of installations.

  Please send comments.
  Good luck!

• Satellite U400 - S00 Wireless connection problem

  I have a Satellite U400, which was lowered to XP Business.
  Wireless networking seems to work only intermittently.
  I can see several netoworks available and that you have selected the office, wireless access Point to connect automatically. It is the only network that I listed for to connect you.

  The laptop often fails to connect the access point, often trying to connect to another nearby wireless device unsecured.
  If I manually select the office network and click 'Connect', it asks for the key wireless (I have enter) and then it connects briefly, gets an IP via DHCP and disconnects quickly about 10 seconds later.

  If I repeat the reconnection attempts, sometimes I am able to keep the connection for several hours, but if I stop and restart I have to repeat the same procedure. I downloaded what I think is the most up-to-date intel wireless drivers, but I would appreciate a pointer to the most recent.

  I'm not using the ConfigFree, just the menu of Windows Wireless configuration base (Zeroconf service)

  This is driving me crazy. Help, please.

  J

  Hello

  I found this thread and I would like to my experience with the U400.
  Yes, I have a U400 and I installed Win XP Pro.
  I have an Intel WLan card and I already updated the driver WLan to the State.

  I found new drivers here:
  http://APS2.toshiba-tro.de/WLAN/

  I must say that my WiFi works without problem! I have the latest version of the BIOS and I never noticed any problems.

  I must also say that I have don t use tools of any additional WLan configuration but ONLY options specific to Windows and its ok.
  I have disabled the Intel ProSet utility Msconfig and it does not load at the beginning.

  I have configured my OS and laptop computer ONLY connects to my wireless private network.
  Of course if my private Wlan is not available it automatically connects to a WLan unsafe in my range.

• Satellite U400 chess backlit

  The backlight on my Satellite U400 guard failed. If I close the lid and open again once it comes back for a few seconds and then fails again UNLESS the power cord is out and the laptop running on battery power at which case it acts normally.

  I changed the inverter. Any other ideas?

  > UNLESS power cord is out and the laptop running on battery power, in which case it is normally.

  Did you check if the key Fn + F6 and Fn F7 combination would increase and the brightness of the screen?

  Please check if the brightness of the screen can be changed using these buttons then the FL inverter should be ok and the problem could be linked to the Win7 power management setting.

  If the problem is related to power management settings, then I would recommend this change.

  * Go to control panel-> power-> Settings Options * change Plan

  Here you can adjust the brightness of plan
  You can set this separately for the use of the battery or AC mode

• Satellite U400 - 12 p BIOS update problem

  Card mother name: Toshiba Satellite U400
  Part number: PSU40E-02300EG3
  BIOS type: Phoenix
  BIOS version: V3.00
  System BIOS date: 12/07/08
  Video BIOS date: 03/30/07

  Aida64 quick report
  http://www.fileserve.com/file/rQkvtxY/report.txt

  I tried to do the 4.70 update in Windows 7 64 bit, but WinPhlash64.exe is freeze my laptop and I don't have (I close all program and run is administrator but I do not have) I kill the antivirus task and close all programs set Compatibility Mode for WinPhlash64.exe for Windows XP (Service Pack 3) and run is administrator but I failed.

  I tried the UPDATE of WinPhlash BACK 32-bit or 64-bit, but I failed, "start this aplication canoe in dos mode".

  On your site I can't find my v3.00 Bios version and the 4.70 can update...
  * What I'd do people? *

  Thank you

  Post edited by: macak12

  Hello

  I've got the same laptop model and updated the BIOS to version 4.70 - Win and everything last week went well.

  I also have Win 7 OS but 32 bits.

  Just a question: have you you uncompress the package correctly before you run the exe file?
  You should do this in a folder created. Moreover in the majority of cases the VAP (value added package) must be installed on your machine.

  Check it!

• Have 4 GB of RAM on Satellite U400 but says OS only have 2 GB

  Have recently downgraded notebook Toshiba Satellite U400 (model PSU44A-00J00C) of original Windows Vista business to Windows XP Pro (pack 3 update service) assistance of the system recovery discs. Have 4 GB of RAM installed on the laptop with 32-bit system and was reading that this amount with Windows Vista, but now the figure has decreased!

  I got the digits in the information system:

  Total physical memory: 4 GB
  Available physical memory: 2 GB
  Total virtual memory: 2Gb
  Available virtual memory: 1.96 GB

  My available physical memory should not read at least 3 GB? BIOS is reading at 4 GB. Have updated the bios and chipset without change.

  Want to tighten a little more memory to the computer, since I installed it - is the best I can get 2 GB?

  Thanks for your interest, look forward to your response.

  Hello

  Start the DirectX using the dxdiag command.
  You will find a few details and the info about the system.
  The news of RAM should be available as well check what it says DirectX.

  PS: Win 32-bit must be present about 3.2 GB of RAM. It's max and limited by the 32 bit OS.

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• Try to restore Satellite U400 with external ODD

  Hi, I'm fighting with my laptop trying to restore it to factory settings, my cd player died some time ago and I have been using an external.

  I tried to restart using the recovery disks in the external drive, it starts the process and wants the recovery disk set in the default cd player (one broken), also tried to restart the recovery of HARD drive and receive the same message to put the disc into the cd player?

  I also have a copy of windows THAT XP pro disk so I downloaded a program called wintousb and tried to boot and load a new copy of windows by the usb port, got an error about a missing file.

  I'm about to give up then if someone could help me that would be great.

  Thank you

  Hello

  One of my friends owns a Satellite U400 and I tried to boot from the external USB CD/DVD drive, but this was not possible. I guess that there is no support on the side of the BIOS.

  However, the installation using the USB it works...
  I recommend you the Win - USB forum of possible solutions.

  In addition, you must make sure that the driver SATA is included because Win XP would not see the HARD drive without driver

• Satellite U400-22Z - random character of space in addition to the letters types

  Hello!

  On a whole new Satellite U400-22Z by pressing the letters on the keyboard sometimes it types a space character in addition to the letter pressed after the letter. for example, by typing the word "test" it may look like in "you st" or "t" or your "t" (although if the problem appears, it allways inserts space at the same location in a word give, then it would always be "t's" If that Word is typed several times). the problem occurs randomly, sometimes, that the problem does not appear for an entire session or day, sometimes several times after another. the probleam appears in several programs (IE, explorer, firefox, Word, even to the connection of the user to the start!)

  I tried (after talking with toshiba support) and an update - chip and bios does not work remove the problem. even after a complete roll-back to the original state of pre-instaled/factory using the disk HARD recovery has failed. It is very difficult to locate/pinpoint the problem to some show because the problem might appear only a few days and then "strike" again...
  I am running vista home 32 on the laptop, and given that the bug appears when using only the installed software origin I dosent seem to be caused by something other than the original software...

  Any help would be greatly apreciated!
  Tankxs everyone!
  Greetz, cybersurfer

  Hello

  You must update the BIOS mate.
  I am owner of U400 and I did update the BIOS as well.
  He solved some annoying problems.

  PS: Disable Touchpad while typing I still accidentally hit and so my Messenger jumped to another line

• Satellite U400 - the webcam no longer works

  Hello guys here is my sudden probloema!
  A year ago I bought a laptop
  TOSHIBA - Satellite U400
  with s.o. WinVista 32-bit and webcam built-in chicony etc...
  Last year, everything worked properly, but since a few days, the webcam no longer works.
  Whenever I try to open it, a message from the cam of management software that says "Webcam driver open fail, please reboot or the computer room.

  I tried to do all this: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam...! notebook bios set to day...! useless!
  the strange thing... Although going into Device Manager... the webcam is not there...! But if the launch seems open just then check what caz... Caveat!

  Gan you help me?
  Graziee

  If the cam is not listed in the devices (imaging devices) Manager, this normally means that the hardware is defective. It is possible that there is problem with the cable of the cam. Try to bring back the screen and check if the cam will be recognized again.

• A sensor of fingerprint Satellite U400-151?

  I bought a Toshiba Satellite U400 T5800.

  When I read the book it says there FINGER recognition but when I open it I don t see it anywhere.
  Satellite U400-151 finger touch so I can open a windows session?
  Thank you

  N ° Satellite U400-151 doesn t have fingerprint sensor. If you control s operating manuals, you will see that the fingerprint sensor is optional and not available on each Satellite U400.
  Maybe Satellite Pro's fingerprint sensor. For this model of laptop, there are several different hardware platforms available.

  Anyway I like this small Satellite and I hope you will enjoy it a lot. ;)

• Can not install the display on my Satellite U400-13D driver

  Hi all

  Since 5 days ago, I got a new Toshiba Satellite U400-13 t, and I have restored it to get a clean Windows Vista. Everything is ok, but I just have a problem with the display driver Intel. It was downloaded from the Toshiba web site.

  Problem is that this driver says that he cannot work because there is not enough free resources, error code = 12.

  I tried to get another driver from the Intel site, but I can't install it because the installer say it cannot install on this system.
  I don't quite understand. And so now I can only shows a poor 1024 x 768 :-(

  Can someone help me to solve my problem?

  I thank in advance.

  Stand by. You have installed clean Vista using the Microsoft DVD facilities. Am I right about that?
  Your laptop belongs to the series of PSU40E. Have you installed the drivers for this model?
  At first please install the Chipset driver.