Satellite U500 - deactivation of signal that appears urgent multimedia keys

Similar Questions

• Satellite U500 - picture on the screen appears in yellow

  I use to set the external display on my laptop to extend my desktop.
  All a da suddenly the screen turned yellow.
  I can still use the screen, but everything on screen is yellowish.

  I have connected my laptop with another screen with my laptop and its yellow, so I tried to connect another laptop to my monitor and it worked fine.

  Looks like there is a problem with the hardware, I have readers of upgrade and did everything I can do with the software but not yet done :(

  Concerning
  Sagar

  > I have connected my laptop with another screen with my laptop and its yellow, so I tried to connect another laptop to my monitor and it worked fine.

  This means that this issue is related to laptop and no not the external monitor.
  I think it might be a graphics card related issue since the update of the display driver or the facility didn't change the situation.
  So, what to say. the GPU needs to be checked and to my eyes, this is a job for a Toshiba laptop technicians.

  What do you think?

• Satellite A300 (PSAG4E) - the highest point of the multimedia keys does not work

  Hello

  I have a problem with my computer (Satelltite A300 PSAG4E windows vista), can't do on and off the highlight of multimedia keys, I don't have any tab to highlight the computer in the assistance program.

  will be very happy if you help me!

  Hi hellowin,.

  What multimedia keys tell you exactly? Do you mean the buttons light between the keyboard and the screen?
  In addition, it would be interesting to know what the problem is exactly

  In any case, if you have a problem with these buttons I recommend reinstall Toshiba Value added Package! :)

• Windows 7: how to change the keys of mark and bar point oblique to come as the E that appears on the button

  original title: Windows 7 the slash, and the period key to querying are included as the E that appears on the key how can I change this

  I have a new Toshiba laptop and the slash and question mark affects only come up like the E located on the same key / / how can I change this

  Press the Ctrl + Shift key.

  Try to enter again the question mark. Sometimes, you have to press CTRL + SHIFT key a few times to moe to operate.

  Basially, if you want the sign E, press CTRL + SHIFT keys.

  Repeat the same way to return to? sign.

• Satellite A300 - 1 9 PSAJ4E unable to use 2 multimedia keys

  Hello

  After that I reinstalled win7 64 bit on my SSD I'm unable to use my 2 first multimedia buttons (mute, cd/DVD).
  I am also unable to save them because there are not not in the program of buttonsupport!

  Here is a picture of the problem http://img207.imageshack.us/img207/692/buttonsupport.jpg
  I reinstalled vap several times without success, also help the toshiba / optimalis / does not show the TBS guidance.

  Play/stop/next/previous works very well

  Thank you if you help me

  sincere greetings, Jonah

  Hello

  Have you installed the VAP?
  The VAP means added value package and it contains the tools that control the multimedia keys.
  If you have already installed this PPV, I recommend this reinstall again.

• Satellite U500 - USB2.0 UVC webcam no longer works

  Hello

  I just upgraded my Skype to the latest version and now my integrated webcam usb2.0 UVC does more work. In fact, she seems to light (blue light that appears next to it on my screen) but the image is black with a grey circle search turning in the middle.
  My PC is a Satellite U500-1DZ.
  To be honest, not been use my webcam for 3 months before that, but the last time worked perfectly with the old version of Skype

  At the same time, my Council of Toshiba Tempro update me my driver my BIOS and display
  I tried to do this several times but it doesn't work.
  For the BIOS, I'm just able to download 44% of it, and then it just stops. Same with the display driver.

  These 2 problems could be related?
  What can I do?

  Thanks in advance for your help and response

  It is not easy to say what the problem is here, but what you can try is to reinstall the software of the webcam of the Toshiba download page and check again.

  If there is no problem with your laptop, in my view, there is no reason for updates, including BIOS update.

  Anyway, the latest versions, you can find on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• Satellite U500 - 10L - Windows must be activated

  Hello.

  I bought Satellite U500 - 10L of WATER and windows vista has been installed on it. After I bought the laptop by message 4 months appear telling me that windows is not original, and it must be enabled. I contact Microsoft but they told me to go to Toshiba and much in demand won't start and I tried to get into the series several times but refuse the windows.

  Now I need to know what I can do to fix that?

  Hello

  You use the preinstalled version of Vista or did you do your own installation? The key on the lower side belongs to the pre-installed Windows version and t can be used with other versions.

  If you are using the factory settings, this message shouldn't t appear. Did you install additional software or tools?
  You should try a system restore to an earlier point in this case. Maybe it helps

• Need help to solve the problem on my Satellite U500 PSU9ME

  Dear Toshiba

  I've always used laptops for years working time or personal laptops; I decided to change Toshiba because I hear a lot how they are and high quality!

  Since I bought my laptop and I'm having all sorts of problems with it!

  1. 1st day I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  2. I've updated of bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  3 today, I had a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  I'll take it tomorrow at the service, but the laptop was purchased on March 24, 2010 only! And it has been registered online on March 26, 2010;

  The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of this.

  I have didn't even use it again as heavy I used to other brands which has never had a single issue!

  This does not mean your laptops are bad, but IE please help and provide solutions or maybe this model needs an urgent review!

  Thank you!

  Model: SATELLITE U500

  > 1. 1st day, I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  Seems, that it was a software issue since I noticed a similar problem after receiving some updates from Microsoft is the updated graphics driver

  > 2. I have updated to bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  Wonder why you n t read the FAQ/HowTo section in this forum.
  Here you can find the BIOS update HowTo!
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  > 3. Today, I got a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  Seems the cooling starts module malfunction the ASP technician should help you

  > The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of it all.

  You're right, this is not normal cell behavior but it must be said that it s a machine and the machine could begin to malfunction it s nothing unusual and in your case, it was simply bad luck that happened after a short time of use

  I had a Toshiba laptop for 6 years and guest what? It s work great since the day of purchase trees

  Good day...

• Satellite U500/01b - loop Configuration

  Hi all

  I just bought a brand new Toshiba Satellite U500/01b. I brought home and tried to put in place, after recovering to its State initial 'configering for first use"appeared then windows starts and Toshiba configuration came and grew normally.

  At the end he told me he was setting up pilots and needed to restart, after restart the configuration of Toshiba starts once more, then configures the drivers and restart only to start the Toshiba Setup once more. The first power it gave me the ability to recover with windows 7 32-bit or 64-bit. I try it with the 64 bit

  There is no way to break the while loop its configuration in windows, cant alt tab, ctrl alt del-> Task Manager becomes just hidden behind the configuration window

  Does anyone have an idea of what is wrong and how I can actually get to use the new laptop?

  Hello

  I think that there is no loop configuration. I also bought new Satellite U500 weeks barely and after that first commissioning is the same. The Configuration screen for first use appears very often, maybe up to 7 or 8 times
  I could also switch between windows by using Ctrl + Alt + Delete, but I waited a bit until installation is complete. Since them my laptop works properly and I can use Windows 7 without any problem.

  So just wait a little longer, up to an hour. I think that everything is ok with your laptop!

• Satellite U500 - 01b - Webcam turns on, but nothing

  Hello world

  I have a Satellite U500/01b, aged for 2 weeks and I am yet to discover how to operate the webcam. Everytime I open the program (the top button on the small box that appears on the left) I just get a black screen. Turns on the webcam, but I see nothing. I had it working at a time by selecting 'night mode' in the settings but now I went to for use and its just empty.

  Y at - it a trick or something to make it work? What I am doing wrong?

  Thank you.

  Hi J_irwin,

  Are you running the factory settings or did you do your own installation of Windows?

  In my view, it must be a problem with the webcam settings and you should check out them. So read this article that can help you:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://APS2.Toshiba-tro.de/KB0/HTD9402LC0000R01.htm]

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite U500 - 10 M some problems with utilities

  Hello!
  I reinstall Windows on my laptop (now - Windows 7) and you have problems:
  1. I have install eco utility, but Eco Button (near with Power Button) do not work. But if I run the eco Mode in utility eco - Eco Button lights up.
  2. my work PC Heath Monitor wrong(look: http://clip2net.com/clip/m0/1276475723-clip-75kb.jpg). How to fix it?
  3. prior to reinstalling, when I pressed the FN key - on the top of the screen appears the help bar. Now this bor does not appear. What are the tools are not enough?

  Satellite U500 - 10 M, Windows 7 x 64

  THX...

  Hello

  Foremost the U500 - 10 M belongs to the series of PSU5EE.
  I put t know what version of BIOS that you use but it seems that the latest BIOS for PSU5EE and Win 64 bit series are BIOS 2.40 - WIN.
  You could update the BIOS if you use an older version.

  All the tools of Toshiba Windows 7 need VAP (value added package).
  This package must be installed first!
  After the installation of VAP you could install other tools like Eco Utility, PC Health Monitor, hardware or other configuration

  > Before reinstalling, when I pressed the FN key - on the top of the screen will appear the help bar. Now this bor does not appear. What are the tools are not enough?
  Keys FN utility need to Support Flash Cards!
  I didn t find map Flash in zone download U500 so I recommend you to choose another series of notebook and to download the utility of the flashcard from there.

  Welcome them

• How to connect the camcorder to Satellite U500-1EZ

  What is the best way to capture HD to Satellite U500-1EZ camcorder videos?
  Is the HDMI port for output only?

  Thank you!

  Hello

  The laptop supports the VGA and HDMI output port.
  These ports name says it all; It s output port. It sends signals and cannot receive signals.

  AFAIK there is no plug-in software component video interface.

  If you want to move only the videos from the camcorder to laptop, I recommend the USB ports. I guess that the camcorder supports firewire port in such case you could use an adapter of the firewire over USB that allows to move the files to the HARD drive.

• Re: Satellite Pro L300 - no signal VGA on an external TV

  I have a satellite pro L300. When I connect to the TV using a VGA cable I can't get a signal.
  When the PC starts the Toshiba Logo appears on the TV screen, then microsoft appears, but then the only thing that appears on the TV screen is "no signal".

  I can't understand what is wrong - someone can help please?

  Hello

  You can boot the system to Windows and you can use s to laptop display?

  After windows OS has started, use the Fn + F5 combination to switch between the internal display and the external monitor.

• Number that appears on the Messenger of FB icon

  I got a five number that appears on the messenger icon, but I don't know what this means or what to do with it.  I click the icon and I see my 200 contacts facebook!

  1. where can I see the 5 messages?  If these are five messages.

  2. when I logged in messenter I've seen some of my FB contacts with a message saying "I use messenger." This message did get sent without my urgent shipment?

  3. someone has a video on it?

  bobbymak wrote:

  I got a five number that appears on the messenger icon, but I don't know what this means or what to do with it.  I click the icon and I see my 200 contacts facebook!

  1. where can I see the 5 messages?  If these are five messages.

  2. when I logged in messenter I've seen some of my FB contacts with a message saying "I use messenger." This message did get sent without my urgent shipment?

  3. someone has a video on it?

  Ask facebook or look at their support site, since you use their messenger app.