Save me a disconnection

Similar Questions

• Error-2147352567 when you use save the vi report

  Hello

  I am developing a software test bench end line for a company. Everything was going well until I met an unexpected error which I don't understand. My code works a simulation engine and stores data in two excel files. When I have the path disconnected to save the report to the File.vi (screenshot 1), my program works without problem and records one of the files and returns an error due to the vi save report being disconnected (as expected). But when I connect the path to save the report to the File.vi, I get an error-2147352567 (screenshot 2) at a table to append to report.vi elsewhere in the code, which worked perfectly well until the road was connected to the vi to save the report. Also, now the second excel file is saved because its path has been connected. I don't understand what is the question. I couldn't find any source that has given me a reasonable solution to the problem either. I use Labview for less than 2 weeks, so forgive me if I forgot something.

  Hi DPAC.

  My apologies for the confusion in the previous post, I thank very you much to clarify it.

  Following my last post; the error was due to a race condition. There is no data flow between two separate writing report files. This means that LabVIEW will try to run the two bits of code in parallel. However, it was sometimes causing one of the sub-vis to be called by two different parts of the code at the same time, causing the error.

  This is the reason for which the code executes without error above if you have disconnected the path to the first 'save report to File.vi', because this part of the code was not running, allowing the second party to run freely.

  To counter this I simply wired terminal 'error' "save report to File.vi" (the one that used the All_Saved.xlsx) in the terminal ' error in ' of the 'new Report.vi' (one who has used the Template.xlsx). Because the screws will not work until all entries are filled, this forces the writing of the first report before the writing of the second report, not occur at the same time.

  I have attached the revised version of the "EOL_V1.vi" where you will be able to see how I wired errors to force execution.

  I also noticed that you have not initialized your shift register "speed". This means that every time that you run the program, it will retain the last value from the previous execution. Is - this intentional? This means that your worksheet does not properly update if you run the program twice in a row.

  Thank you

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• Windows Update error code: 646 (KB982331) failed

  I can not update KB982331 I tried the stand alone far from the center of update, that I turned my UAC off I disabled Norton I get the message that it was a problem of update error code 646 as I tried to save the download, disconnected from the internet and installing still does not update.

  Access the following KB via Internet Explorer (32-bit) only, run the difficulty, reboot & then try to reinstall updates: http://support.microsoft.com/kb/886549 [ignore the title, etc.] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In XP get error log that csrss.exe is not found, what is it?

  The csrss.exe file is needed? I get an error when opening session that this file is not found.

  Hello

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows
  

  You can refer to the following steps:

  * Click Start > run

  * Type regedit and press to enter.

  * Search HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  * Right-click on winlogon, and select export.

  * Save the reg file to a location incase you must cancel the following changes.

  * In winlogin search shell and double-click it.

  * Change the value of "Explorer.exe C:\WINDOWS\System32\csrss.exe" just "Explorer.exe".

  * Save changes and disconnect and reconnect.

  * Restart the computer.

• List of senders allowed on Eprint

  I have set my printer to accept only eprint to selected users, but whenever I create an allowed list, save it, then disconnect the next time, as I log it didn't list just original pop - up box saying that it will start a list to make things easier. How can I stop my list created endangered?

  I understand that your list of senders is not save.  I would like to try the following steps.  Let me know how it goes.

  1. connect to ePrint Center

  2. click on the senders list and add the user as usual.

  3. click on Save icon after the addition of address - do not sign off ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.

• PowerCLI VM Nics AdapterType report

  Hi all

  I'm doing a report for my virtual machines (400). I am management Vcenters 2 in bound mode and I've seen some mistakes in the process of creation of VM, e1000, Vmxnet2 maps on the server.

  I use Powershell/Powercli for two years from now, but I m facing some problems... If the servers have more than 1 NIC, my report just write 1 card...

  If you could help me, I assumed that my script is not correctly written...

  Here it is:

  # CREATE EXCEL #.
  $Excel = new-Object - Com Excel.Application
  $Excel.visible = $true
  $Excel = $Excel.Workbooks.Add (1)

  $VM = $Excel.WorkSheets.Item (1)
  $VM. Name = "Network Type".
  $VM. Cells.item(16777216) (1,1) = "name of the virtual machine.
  $VM. Cells.item(16777216) (1,2) = "name of the OS.
  $VM. Cells.item(16777216) (1,3) = 'IP address '.
  $VM. Cells.item(16777216) (1.4) = "VM HOST.
  $VM. Cells.item(16777216) (1.5) = 'VM STATUS '.
  $VM. Cells.item(16777216) (1.6) = "card Type".
  $VM. Cells.item(16777216) (1.7) = "name of the map.
  $VM. Cells.item(16777216) (1.8) = 'data center '.

  
  $WorkBook = $VM. UsedRange
  $WorkBook.Interior.ColorIndex = 0
  $WorkBook.Font.ColorIndex = 5
  $WorkBook.Font.Bold = $True
  $WorkBook.HorizontalAlignment =-4108
  $VmRange = $VM.range ("A1:Z500")
  $Vmrange.font.size = 8
  $intRow = 2

  # CONNECTION VCENTER #.
  SE connect-VIServer-Server $VCenter - user $User-Password $PWD - AllLinked: $true

  $VMs = get - VM | Sort-Object Name

  {Foreach ($ColVM to $VMs)
  #Gathering info on $ColVM
  $VMsItems = get-VM-name $ColVM | Select Name, VMHost, PowerState,
  @{N = "OSFullName"; E={($_ | (Get - VMGuest). OSFullName}},
  @{N = 'IP address'; E={($_ | (Get - VMGuest). Ip_address}},
  @{N = "AdapterType"; E={($_ | Get - NetworkAdapter). Type}},
  @{N = 'AdapterName'; E={($_ | Get - NetworkAdapter). Name}},
  @{N = 'Center'; E={($_ | Get - data center). Name}},
  @{N = "CardCount"; E={($_ | Get - NetworkAdapter). County}}

  #Filling Excel report
  Foreach ($Name in ($VMsItems.Name)) {}
  $VM. Cells.Item($intRow,1) = [STRING] $Name.Name
  $VM. Cells.Item($intRow,2) = [STRING] $Name.OSFullName
  $VM. Cells.Item($intRow,3) = [STRING] $Name.IPAddress
  $VM. Cells.Item($intRow,4) = [STRING] $Name.VMHost
  $VM. Cells.Item($intRow,5) = [STRING] $Name.PowerState
  If ($VMsItems.PowerState - eq "Receptor") {$VM. Cells.Item($intRow,5). Interior.ColorIndex = 4}
  Else {$VM. Cells.Item($intRow,5). Interior.ColorIndex = 3}
  $VM. Cells.Item($intRow,8) = [STRING] $Name.Datacenter
  $VM. Cells.Item($intRow,6) = [STRING] $Name.AdapterType
  If ($Name.AdapterType - eq 'Vmxnet3') {$VM. Cells.Item($intRow,6). Interior.ColorIndex = 4}
  Else {$VM. Cells.Item($intRow,6). Interior.ColorIndex = 3}
  $VM. Cells.Item($intRow,7) = [STRING] $Name.AdapterName
  {$IntRow ++}
  }
  $WorkBook.EntireColumn.AutoFit)
  $VM. Columns.Item (2). ColumnWidth = 25

  # BACKUP #.
  $Excel.SaveAs ($FILENAME)

  # DISCONNECT VCENTER & EXCEL KILL PROCESS.
  Disconnect-VIServer-Server *-confirm: $false - Force: $true
  #Stop - Process - processname excel

  Thank you

  Julien

  Also have you tried

  $VMs = get-ResourcePool-name "REC". Get - VM

  That should only give you virtual machines in this specific resourcepool.

  And you can have more than 1 name on Name - parameter

• Report error out after the backup

  Hi team,
  
  I am getting a strange behaviour in my reports.
  I have a report I do a sum based on a single column and then do the total general at the end.
  
  It works well so far, but when I save it and disconnection and reconnection, the same report recorded error as below:
  
  State: HY000. Code: 405231296. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 42038] A REPORT of a total amount of function must be in a worksheet query block. (HY000)
  
  Can you please let me know the solution for this.
  
  Thank you
  Bhupendra

  Hi Gupta,
  Please see this post

  http://bischool.WordPress.com/2009/08/10/fixing-a-report-totalling-function-must-be-in-a-leaf-query-block-HY000-error-in-OBIEE/

  or

  Summary of the Union query

  Thank you
  Angelique, v

• Windows won't let me not newspaper inside a loop to save the settings and disconnects

  Windows won't let me open a session in this Office makes a loop to save the settings and disconnects

  It was a virus that's causing the problem

• my pc disconnects when trying to save in the folder that is located on the same network share as "offline files".

  I have 11 Windows 7 and they were all 'My Documents' redirected to a folder on a network (H:\) drive, in other words it has been made available offline. On this network drive, there are various files, some are personal folders and some are for public use (DATA, COMMONS, etc...)

  Now, sometimes when I try to save a document in the network drive, but not in my personal file, lets say H:\common, the laptop disconnects and shows me all the folders in this shaded in grey, network drive (as when I'm offline) and by the single folder is the personal folder which is always available. When the application attempts to save to disk network is displayed with an error message saying that he was unable to record on the disc, the laptop comes online again. This process can take anything from 10 seconds to 5 minutes and in a few rare occasions blocked the entire computer and I had to restart the machine.

  I'm having this problem on all computers, but not all the time, it can produce a few 3 - 4 times per hour, sometimes I can secure documents without any problems, and sometimes, it has not allowed me.

  Besides some of the laptops are connected to a windows 2000 server server and others to a Windows 2003 server, and as I said, all have this problem.

  I tested and replaced, hardware, tried the service packs, disabled antivirus programs, disabled the Auto Disconnect on servers... STIL not luck

  Any ideas?

  Thanks in advance

  Hi rpgoni,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Forums TechNet Windows Server général.

• Your history file drive has been disconnected for too long. Pour garder keep save copies of your files, reconnect your player, then run a backup.

  Original title: plug your drive (Important)

  Reconnect your player (Important)

  Your history file drive has been disconnected for too long.

  To keep save copies of your files,.

  Reconnect your player, then run a backup.

  Recently installed window 8.

  Upgrade Windows 7 clean boot.

  Inspiron 580 s 1 TB

  Windows 8.1

  After TWO YEARS, someone should be able to give us a step by step, to "reconnect" an external, USB hard drive!  I unplugged and then plugged it, several times, without success.  I seem to have this problem with one of my disks USB, a Toshiba.  Access the drive through files Explorerer, seems to work, even if it is "disconnected". Historical files only has problems. Strange! Could it be the drive itself, or it is plugged in to the USB port?

  I had the same issue this morning and found a solution that worked for me.

  This post helped: Windows - historic community of 8 files windows does not recognize my drive hard iomega

  NOTE:

  -make a backup copy of the files you delete first! (just in case)

  -J' had deleted my old historical records from the files on the ext. HDD, so I lost no data. I can't guarantee that the ancient history of the file will be there if you remove the configuration files, as described below. In my opinion, it shouldn't happen, but since I have not tried, I can't guarantee that.

  After checking my disk for drive errors (none) and update the drivers (not not mandatory), I went to this location of records:

  C:\Users\your user folder\AppData\Local\Microsoft\Windows\FileHistory\Configuration

  and remove the four files that were on it. Because they determine the configuration of the file history, when I ran the service once again, I could set up my drive as if it had never been used before. I started historic files, and it lets me choose my hard drive and run the backup as it should.

• screen saver doesn't work if disconnected

  I have my screensaver set to start after 6 minutes of inactivity. It works fine if I'm offline (I'm the only user on this pc). But he no longer lights if I'm connected even though I have no specified program such as running and the Task Manager shows nothing is running on the Applications tab.

  So what's happening?

  Idle means no user activity and the CPU and hard disk activity must be below certain thresholds. Applications tab displays only the programs you started as a user, process presents programs and services that are running in the background. If you disconnect of some people are running is no longer and then the activity falls under the threshold of "idle". A - V scanning and indexing of files from the hard drive are a couple of things happening in the background that can cause what you see.

• in case of power save/hibernation - theater sound system "device disconnected" repeatedly

  When my desktop PC goes into hibernation system sound for 'disconnect device' begins to play repeatedly.

  So I changed the setting of the sound to 'none '. Now, he's playing the system "connected audio device" several times.

  At first, I thought it had something to do with the addition of a second monitor.

  Then I disabled the 2nd monitor power when the use not. Is still healthy.

  So, I disconnected the VGA cable for 2nd monitor. Even the sound repeatedly.

  I could probably just change 'None' system for device disconnected but I want to fix the problem, not hide it.

  Hi David,

  Thank you for the update on the issue.

  If the problem persists, I you suggest to update the display drivers and then check the status of your question. You can see the steps in the article mentioned below to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Download and install the drivers

  If steps above could not help try updating the drivers from the manufacturer's website. If you do not find drivers please give me the brand and model of your computer and we will try to find the proper drivers.

  Keep us updated on the status of your issue and we will be happy to help you.

  Kind regards

• Save the session before disconnecting

  Hi to everyone.

  Could the ultimate function of windows 7 like that?

  Could they 'save' my session in the case of an immediate restart? We need automatic replacement

  for example several IE Windows with its open tabs, in the State that they were before the action.

  I saw this on some GNU/Linux distributions.

  Hello

  Welcome to the Microsoft community. I'll help you with this problem.

  Looks like you want to know if you can record the session Internet Explorer in case of an immediate restart.

  Yes, Internet Explorer sessions will be saved in case of an immediate restart, and next time when you open the Internet Explorer window will ask you to choose Restore last session.

  Additional information.

  Please refer to this link: http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/when-using-restore-last-session-manually-in/e20aecd7-f27d-e011-9b4b-68b599b31bf5

  I hope this helps.

• Album does not save it properly; can't see status of backup in the preferences; cannot disconnect.

  I use PSE 9, currently on the Mac (moved from PES 9 on PC about two months ago). I noticed that the last album, which I have added to the PSE has yet the indication of backup head double arrow next to it, and these images are indeed not in my online account. Generally, this happened on my PC, as I click the account as in PES, enter my password and no matter what I would say that it was incorrect. I'd hit him then "disconnect", re - enter my credentials with the same password I had used, and the system would begin then successfully back up again.

  Unfortunately on the Mac, when I hit the "Sign out" link in the dialog box asking my password (after clicking on my link "welcome...") ("in PSE), he doesn't sign me out - he paused for 20-30 seconds with the color wheel, then just shows that I'm always connected. If I try to go to preferences-> backup, I get a message that there was a problem and I should re - open the preferences later. If I force the background backup process to stop by rt - by clicking on the icon in the Mac menu bar, it indeed closes correctly; However, when I reactivate it is PSE under preferences, as soon as I touched the checkbox, it tries to connect to my account online, and then gives me the same error saying I should «...» Close preferences and try again. »

  Can someone give me some advice as to why a) the backup in PSE 9 finally seems to fail and must be disconnected / reconnected b) why the "Déconnexion" link does not work, or why my password is not accepted within PSE only?

  Yes, I was able to connect via a browser (or same PES - just not the Organizer!) all this time and I use only about half of my space.

  I also posted on another forum PES and was directed to the solution - I had to remove the com Adobe.Pulse.plist file in my user library path and voila' I was able to connect inside the PSE Organizer and re - start the backup synchronization.  You don't know why the problem occurred, but this fixed!