Save on destination disk problem

Hi guys

I recently bought a laptop with two disks. I put in back-up to drive d, which I also use for my work on the road. On my first backup, I got the following error 'jumped backup D:\Project backup files as it is on the backup target", because my project work is on the backup destination drive. Is there a way to get around this or is it advisable to point my backup to an external drive instead and not back-up my laptop?

Hello

See the solution here:

Tags: Windows

Similar Questions

  • Satellite L650 - Windows detected a hard disk problem

    I have 9 as 4 months old satellite L650 that this microsoft Windows message keeps popping up. "Windows detected a hard disk problem, back up your files immediately to prevent the loss of information... etc" have I not a bum hard drive or is it a mistake?
    I have
    have the media discs to recover and this means that I have to reformat the HARD drive and try again. !

    Hi watthhel,

    I think the error message must be correct to Windows 7 and you must do what tells you the message: immediately back up your data and replace the HARD drive with a new one. In your case I would never save important files on the HARD drive. Too risky to lose important files

    Your laptop is 4 months old and that would mean it s covered by the warranty. Contact your local authorized service provider and ask for a replacement drive. They will exchange it and the service is free. :)

  • Low disk problem

    I have a low disk problem that I am having 40 GB hard disk and using Vista Ultimate as the operating system. How can I remove the space and which are the files may be deleted. Currently, I have removed most of the software.

    Information all that 'other Options' are in the link that I have already given:

    The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

    • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

    • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

      Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

      In some editions of Windows Vista, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. This information will also be deleted. For more information about system restore, search Windows Help and Support "system restore."

    See you soon.

  • cannot save to a disk external, continues to not

    Original title: I can't save my laptop disk external, continues to not

    I also see a message stating that my trash is corrupt

    Hello

    see if this information helps you

    How to make a backup of your data

    http://www.vista4beginners.com/how-to-backup-your-data

    How to restore your files

    http://www.vista4beginners.com/how-to-restore-files

    the 1st link below is how do the backup complete pc

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    and that is how do to recover the backup complete pc

    http://www.bleepingcomputer.com/tutorials/tutorial144.html

    and here is the information of microsoft in restoring a system image backup

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

    http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

    to the trash;

    Run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • When you perform a full backup in Windows 7, is also trying to save the destination drive

    Hello when I do a backup on my computer he wants to save the destination for my backup disk. I use the Windows 7 professional 64-bit operating system. I know that he cannot back up the drive on which the backup happens. How can I prevent that from happening.

    Hi FrancisEarley

    Yes, the backup can not be performed if the destination drive is selected in the backup list, if it is selected, then be sure to uncheck this drive and then proceed to the backup or if you want to include this backup disk, and then you must select a different destination location.

    For example, you can't back up the contents of drive E: to drive E:

    You can follow the steps of manual backup and verification-

    (a) open Backup and Restore.
    (b), select 'Configuration Backup' or 'back up now '.
    (c) and then in the list to save drivers deselect the destination drive, if it is present in the backup list and move forward with new steps to perform the backup.

    Refer to the below help links -.

    http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

    http://Windows.Microsoft.com/en-us/Windows7/where-should-I-save-my-backup

    I hope this helps.

  • Windows detected a hard disk problem after factory reset?

    I have a Toshiba Satellite C855D-S5320, not old at all. I tried to download a game and then got the BSOD. I had to reset my PC, lost what I had, but ended up from scratch. Now, every so often, I get a message saying "Windows detected a hard disk problem. Back up your files immediately to prevent the loss of information... ». I have right click the disk hard "defective" for the error checking, no errors found. I tried HD Tune Pro, and tells me 'Warning' for the State of health (05) reallocated sector count (failure) is red, and number of events (C4) reallocated (warning) is yellow. Does this mean I have to replace the hard drive? The computer was working completely fine until BSOD. Now it works and everything but I get this error message. The laptop is not only really old and never any injuries, but perhaps past warranty. I really have nothing left to save, because I lost everything when I have to reset it to factory State. Any advice?

    It's really up to you.  Sometimes there may be false positives, but it looks like your drive is really having some problems.  It was even the cause of the BSOD, who knows.

    You can follow the steps of my colleague here to check your drive for errors:
    http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

    But really, I would take the advice and replace the drive.  Or at least be prepared for this 'die', then save your files somewhere else like OneDrive or something so you don't lose important information when it does.

  • How can I save Inspiron 6000 disk

    How can I save Inspiron 6000 disk before hitting the F11 key

    I have now deleted my hard drive after you follow the instuction this site (blue screen problems said hit F11 to reset to factory settings) and now must return to another machine and told him that this could be done by using a USB connection. Can anyboy tell me how and what I do with.


  • On the Satellite C - Windows HARD disk failure has detected a HARD disk problem

    Since 2 days have been making repeated dialog "Windows detected a hard disk problem", warning of potential failures of the disc so back up, what I did. Disk in question is a Toshiba MK-5065GSXN.

    As a non-tech user, my instinct is that a new laptop is a better choice than to call Toshiba support for a laptop warranty (2 years) out of.

    On the other hand there may be a simple software fix. The opinion or advice welcome

    Hello

    The message says that something is wrong with the HARD drive.
    It might be possible that your HARD drive will die sooner or later so his need to backup data on another HARD drive, disk or flash memory.

    Finally, I must say you n don't need to buy a new laptop just because your HARD drive starts to hurt work in such cases purchase a new HARD drive and replace it
    HARD drive is not very expensive and the replacement of the HARD disk is very easy in your user manual

    PS: what model of laptop you have exactly?

  • After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

    Hello

    After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
    Then a window pops up saying "Startup Repair cannot repair this computer automatically.
    The details of the problem say;
    Problem event name: StartupRepairV2
    Signature of the problem 01: AutoFailover
    Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
    Signature of the 04:65537 problem
    Signature of the problem 05: unknown
    Signature of the 06 problem: BadDisk
    Signature of the 09 problem: unknown
    Signature of the 10:1168 problem

    System Restore does nothing, and all the other tools of recovery. :(

    Please help, it will be much apreciated :)
    DOM

    If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

  • HP Pavilion g7-2010ne Notebook pc Windows detected a hard disk problem

    Hello

    I have a HP Pavilion g7-2010nr Notebook pc and two nights ago, I got a message saying "Windows detected a hard disk problem" and how do I back up my data and then repaired. So I tried it to my WD My Passport 500 GB external hardrive but as soon as he gets as 57% when the reverse said it will create a file system image, the backup fails I tired it three times to try different solutions I found on the help forums, but nothing helps and I don't know if maybe it's because the hard drive problem or another problem. Any suggestions are welcome.

    You can back up by using HP Recovery which should not have problems:

    This should help you:

    http://support.HP.com/us-en/document/c03489643

    You can stop it anytime before restoration starts if you encounter any problem.

  • Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

    Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

    Hello
     

    1. are you able to use the other disks?
    2 have you tried to use this disk on another computer?
     
    The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
    Quick format in no. ID address mark results found
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
     

    Hope this information is useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why my computer says "Windows has detected a hard disk problem", even though it says that the drive works fine in the properties?

    Hello

    I was doing some courses on my computer until this window came on my screen and playback;
    "Windows detected a hard disk problem. I immediately went and checked in the properties to see the current status of the disk, and it says "this device is working properly" I am confused and decided to restart my computer. Again, read the error message and it says that the disc was allowed in properties. Every 15 minutes or so, the same error message. I'm running on Windows Vista Edition Home Premium and have had the computer since 2008. Is this a virus? Or - is this just the computer falsely detect a problem?
    Can anyone help please?

    Thank you very much

    Liam

    What you see in the drive properties in Device Manager has to do with drivers and the drive configuration, not the real state 'physical' the reader.

    First of all, I error side of caution and if sure you have a backup of all your personal files, data, music, photos, contacts, movies, etc., external media (favorite external hard drive).

    Run the check disk (chkdsk); I suggest to run with two checked options, difficulty of file system errors and scan for and attempt recovery of bad sectors.

    How to run the check disk at startup in Vista or Windows 7
     http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    Many manufacturers of computers and most hard disk manufacturers have diagnostic tools free you can download and run to check the status of your drive. Check on the web sites of their respective support.

    Hardware and software vendor contact information
     http://support.Microsoft.com/GP/vendors

    Computer manufacturers
     http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    Kind regards

  • Windows detected a hard disk problem

    I have a dell dimension E520 running Vista Home Basic 32-bit. It is about 2 years old. After login, I get the following message in a dialog box. The message continues pop - up every 10 minutes, or so...

    "Windows detected a hard disk problem and you need to back up the files and contact the manufacturer to determine whether the disk should be repaired or replaced."

    "The next disk reports failure.
    Disc name: SAMSUNG HD160JJ/P
    Volume: /; C: /.

    I have run "chkdsk" and also contacted Dell who advised a full diagnosis running. This indicates that all aspects of the computer and the hard drive are ok.

    Hello tassie steve,.

    You should replace the disk, and then clone on all content, including the MBR (master boot record) to the new drive. What brand you buy, you'll be able to download this free utility software from their site. Do it now, while you can always transfer your data! Hope this helps you. Make it a great day!

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • What is a Teredo Tunneling Interface Pseudso has a disk problem and can I fix it?

    My Windows 7 was freezing after I let it idle for a while. I have to do a hard reboot. Recently, I noticed that I had Dell support help agent and Dell update on my computer but I did not the it. They have been installed at the time my warranty missed. A forum said they had the same problem and the problem stopped after uninstalling them. It did for me too, for about two days but I'm back to freezing.

    Another forum says run diagnostics from the manufacturer. I did and I received two error messages. One was 0F00133C and the other was 0F001332 MAG DRIVE - request BIOCIC interrupt (IRO) has not indicated in time. At this point, the computer froze and wouldn't it be fun to just try again. Once again a forum said it was a sign of a dead hard drive.

    Just now under system and security of the Control Panel, I had Pseudso - Interface Teredo Runneling has a disk problem and hardware problem cannot have been detected.

    This computer can be solved without costing a fortune. They said I should also have other problems with a hard to die, but I did not. Would appreciate any help.

    Hello

    Thank you for giving us the opportunity to help you.

    I suggest you try the step provided by Nithyananda J replied on March 27, 2010 in the thread mentioned below. The steps helped a lot of people facing the issue with Teredo Tunneling Pseudso-Interface. Hope this will help you too.

    Teredo Tunneling Pseudo-Interface this device cannot start. (Code 10)

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • "Windows detected a hard disk problem" disk name VOLUME: WDC WD3200BEVT - 602CTI ATA DEVICE: C:\;D:\

    A message box appears every 10 minutes saying "Windows detected a hard disk problem" disk name VOLUME: WDC WD3200BEVT - 602CTI ATA DEVICE: C:\;D:\        If I click on backup now (that I tried to do it on the hard drive Seagate and CD... and it gets to about 35 to 50% then fails)... it goes to the BSOD... Yesterday, I bought a Driver Update. and this morning I ALWAYS get the message "Windows has detected a hard disk problem '...» I'm not very savvy computer... I researched this days... I gave up... Help, please! ....

    The disc is a failure.

    Copy what you can from it to your backup device. You may need several attempts to make the copy.

    Don't try to backup the drive: is not remaining usable for long enough for a full backup complete.

    Then replace the disk and reinstall Windows and your applications and data, and retrieve your information from the user of the copied data.

    You may be able to make a claim on WD http://support.wdc.com/warranty/index_end.asp?lang=en

Maybe you are looking for

  • Satellite A55-S306 - screen problems

    Satellite A55-S306 screen works, but begins to r-o-l-l and f-l-i-c-k-e-r. I can use an external monitor and it is fine.What would be the problem? Sorry for the (-), but the forum is telling me that the words were more effective.

  • How mirror windows on several ipads

    We try to reflect a windows to several iPad screen. We want to implement our meeting room so that members of the jury can consult information on iPads.  The windows computer (Dell laptop Windows 7) would reflect it's screen of the iPad during meeting

  • The icon positions

    Intermittently, after turning on my computer laptop back, rallied all the icons in columns on the left side of the office.  I have disabled auto arrange and align it on the grid, without success.  How can I backup my settings of office for the positi

  • Where is my windows media player?

    I have a computer built house running Windows 7 pro 64-bit. I have a M:\ Disc 1 TB for all my music and sound effects. When I go to computer and do a right click and left click on properties tells me that I have 107 GB of music files there. I don't h

  • SX10 and H.323 by highway

    For the record, is not on the track express-E and CUCM... I a SX10 recorded a highway of VCS and have run into some problems when I call a Polycom RMX customers. If I call from a SX20 forced to call H.323, everything works fine, but with SIP my clien