Save the changes to a presenter Video Express project.

Similar Questions

• Adobe Presenter video Express: problem with webcam Logitech c920

  Hello

  I have a problem with Adobe Presenter Video Express, when I want to use the camera Logitech c920. (computer laptop Dell Vostro 3560, Windows 7-64 bit, 8 GB of RAM, memory)

  When I launch the program and start creating the new project, I see only a black screen with the error message "your webcam is busy or it does not." "Try closing other applications that might be using the webcam and select it again. But when I press "record", program begins to make the video - and the webcam works. My problem is that I can't use video effects to change the background: I can't see Preview video/webcam with button "make my impressive background." When I switch to the integrated webcam, it works without problems, including the function of substantive change.

  I have closed all other programs. I restarted the laptop. I deleted and reinstalled the drivers for the camera. But it still does not work properly.

  Any suggestions how to solve the problem?

  Thank you

  Hi George,.

  In our tests, we saw that the Logitech C920, must the last driver of Logitech and the software must be installed so that it works correctly. Please make sure that you are picking the latest driver from the following link:

  http://support.Logitech.com/product/HD-Pro-webcam-C920#download

  If installing this driver does not resolve this issue, then please try the following:

  1. Sometimes, the webcam is busy on the launch of the app. Select the camera, then the Logitech camera to try a fix for this problem.
  2. Some Bluetooth drivers interfere with the functioning of the app. Disable all Bluetooth devices and see if it solves the problem.
  3. Send us a journal of diagnosis of the problem. You can follow the steps in this link to launch the application in diagnostic mode: presenter help | Adobe Presenter Video Express (Windows & Mac) . When you close the application, you will need to send us the diagnostic log. Please send it to [email protected] . A journal of diagnosis can help us to quickly solve the problem.

  If the problem is not resolved, can we get a Connect session to debug the issue? You can contact us at [email protected] with a suitable date and time, and we will solve it through Connect. We are available Monday - Friday, 18:30 - 11:30 PST.

  Thank you

  Renzil D'Souza ([email protected])

  Presenter engineering team

  PS: as a temporary workaround, you can check without changing the background, then the change in the background inside the editor using the option "Video improve."

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Portege 2010 - cannot find the button FINISH to save the changes to the BIOS

  I couldn't save my Bios Setup because I can not find the keys to the end to save the changes.
  I tried to hit all the keys on keyboard, but none of this save the settings.

  Can you show me the keyboard scheme showing the end keys?
  I have toshiba portege 2001 series.

  > Can you show me the keyboard scheme showing the end keys?

  I checked the user manual which you can download from the Toshiba user manual page and the END button seems to be located in the upper right corner, it s above the BACKSPACE key.

  See you soon

• Unable to save the changes in the resolution of the screen on Satellite P20

  Recently, I have problems with the resolution/quality of images on my laptop P20.

  When I try to remedy this in the tab settings of Options Diplay it me does not save the changes to the screen resolution or image quality. I am currently using the default monitor on NVIDIA GeFOrce FX Go5200.

  Any ideas?

  Hello

  For all the ideas give us more information please. I just know that the resolution of the standard screen for this laptop is 1440 x 900 and if the right display driver is pre-installed to avoid any problems.

  I used Satellite P20-303 (nVIDIA GeForce FX Go5600) nearly two years with the original display driver and have never had any similar problems.

• Photos app does not save the changes, impossible to edit photos without using other applications

  'Photos' of photo editing features does not work because it is impossible to save the changes. Photos can be edited as usual, but trying to save the changes that the photo is reinstated to the State of origin regardless of changes. There is no error message, to solve the problem, I tried to reset all settings, but it did not help.

  I have iOS 9.2.1 on an iPhone 6 s.

  Thanks in advance for your advice

  I have the same question since getting my iPhone 6. Very frustrating. Several times the photo says even "revert to original" even though the changes have been never applied, as if he thinks he has saved the changes. I asked for help with an apple store and they had never seen before and had no suggestions.

• Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

  I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

  It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

  If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

  I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

  JC

  JCA says:

  
  

  Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

  Sorry for the late reply.

  Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

• Save the changes to the input parameters of circle finder

  In the finder, circle and Pattern matching

  We use some KING and setings of entry...

  I need to record this change while the application is running.

  Which method I should use...

  to save the changes

  

  Hello

  using xml with the structure of the event function to read and write the values selected.

  Example of XML (you can write the the datastructure options circular detection directly):

  

  Best regards

  K

• Why is my Windows Photo Gallery not allowing me to save the changes I made to my photos?

  I've always been able to edit my images under "fix" and then save the changes. However, now I get a message that the changes cannot be saved because an error with my Windows Photo Gallery. Anyone know what can possibly be wrong?

  Go to this thread and the possible error code in their entirety, the list

  http://windowslivehelp.com/forums.aspx?ForumID=cafb0556-8959-49b9-AFEB-635314aa02f3

• F10 does not save the changes

  I bought a HP 500-023 refurb which was great good cheap at Microcenter.  I would like to enable vt - x, which is a feature of the i3 chip that is installed on this computer, and finally because the Commission will support the other processors I could switch to something that can run a virtual machine that is better outside the i3 chip that went into it.  So, every time I enter the bios and go to the screen that allows me to change the vt - x for 'licence' to 'disabled', that it is not possible to F10 any change.  In fact, it is no screen in the bios at all which allows F10 to save even though the bios says «F10 save/ESC exit»  I built several computers myself in the past and unlocked cores on the processors through the settings of the bios etc, so I am very familiar with the bios settings.  The question is, literally, that the changes cannot be saved.  If someone knows something about HP computers specifically which would explain this weird behavior in the menu of the bios Setup?  To say they have simply disabled the ability to make changes is a total deal breaker and will return just the machine to the store.

  OK as it turns out I have F10 CAN save the changes to the bios settings and activate the HP motherboard Joshua 500-023 device virtualization.  The problem was that I just changed the BIOS with my keyboard not HP.  It's a Microsoft Wireless ergonomic keyboard that I use always.  I would never in a million years try to use cheap plastic keyboard that came with the computer, but read on UEFI and how it detects hardware confidence that it crossed my mind that maybe I should just plug the supplied keyboard with the computer.  YES... that's all it took.  I could then F10 and save changes to the bios.

• Save the change on issue close

  Hi all, I searched around the forum for an answer but couldn't find one.

  I have problem with is basically, I can't get rid of the recording of the dialogue changes when the application closes. Many people suggested using a variant of:

  public boolean onSavePrompt()
     {
         return true;
     }
  

  but I noticed that all the people who got to work have extended their screen. I did not extend my screen - as in the example of the Music Store tutorial - because I don't know how to use the persistent store when the screen is extended. So, if I use the code above, it does nothing.

  Finally, I would like to save the changes when you exit without any dialogue arise. Currently, I save the changes using the menu button - Save as in the tutorial of Music Store. How could do?

  Help, please! Thanks in advance!

  How do you define your screen?  -That's something like...

  SerializableAttribute public class screen extends MyScreen

  {

  ...

  }

  If so, just add the code of onSavePrompt() in there.

  Your screen will confirm record when he thinks there are pending changes (isDirty() == true).  So, another way to avoid it is to simply call setDirty (false) in your code before the closing.

• My wallpaper appears only in the extended format. I want to display a .jpeg file into the center channel mode. I click on center and save the changes, but he remains in stretch mode...

  My wallpaper appears only in the extended format.  I want to display a .jpeg file into the center channel mode.  I click on center and save the changes, but he remains in stretch mode...

  HP technical support solves the problem for me with a patch: I'm sorry that I don't remember all the steps they walked me through but the patch was SP45575. EXE.   It was working fine.  Good luck

• Help with image files, drop box and save the changes?

  My husband put all our photos of drop box.  They are still on our computer, but we can now also access elsewhere.  But it has somewhat modified files.

  I'm putting together, cultures and (in general) to save the changes made to some images.  But I get an error.

  Example: The image I want to change is on the side.  I right-click on the file icon and select "Rotate clockwise" in the menu dropdown. Immediately, I raise the sound "bonk" and an error message appears: "you cannot rotate this image.  The file can be used or open in another program or maybe the file is read only.  It wasn't a problem before doing things to the drop box.

  So, I wait to make sure that everything is ok.  The image is not open anywhere else.  I clicked the properties option to see if it is in read-only mode.  He said that it is not.

  When I open the image and try to use the rotation on the bottom, it will turn.  But when I close the window, I get a different error message that says "Windows Photo Viewer cannot save changes to this picture because there is a problem with the properties of the image file."   There is a link at the bottom of the message box for "Why can't save this picture?  I clicked it.  He said "the subject you are looking for is not available in this version of Windows. For additional assistance, see multiple support options. "The more support options?  Get a tech savvy friend who could help me. Nice.
  Anyone know what I need to do to make this work?
  I don't know what version of windows we have.  I'm sure that's not Vista.  It's the one after that.

  Hello

  Thank you asking in the Microsoft Community.

  1. open Microsoft paint.

  2. navigate to the image through Microsoft Paint.

  3 try to rotate and save the image.

  4 let me know if you are able to.

  Post back with the result.

• Do you want to save the changes

  Hi all

  6i dev,

  I always get him 'do you want to save the changes you have done"message when I open my form and try to run the query.

  without to make anychanges.

  ??

  Thank you

  I found it, I'm assigning a value to an element in a trigger a time new form instance

  Thank you

• Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Hello

  Try resetting preferences

  Note:-back up your Lightroom Catalog beforehand and save Photoshop preferences

  * Now reset preferences Hold Down CTRL + ALT + SHIFT (WIN) CMD + OPTION + SHIFT (MAC) while starting Lightroom. A dialog box appears prompting you to restore Preferences (LR)

  Once done open again Lightroom

  Make sure you have a lot of read/write of the location where you save the catalog... To create a folder on your desktop, confirm, then try to create the catalog again it

  I would like to know if there is a question...

  Thank you

  Assani