Similar Questions

• How to record images of 8 bits of a TCP connection with a smart camera

  Hello my name is Cris and I try to record images 8-bit generated from a Smart Camera NI 1742, which has a frame rate up to 60 images per second. I want pictures of flow time I need and save each image. I've currently implemented the next VI I found in this article: Images streaming of a Vision Compact to a local AVI system , one of my goals was the next, can save an AVI file and now I can do it. According to this article on the screws flattens the images for data of type string, and sends the data to the local computer (PC) through TCP/IP communication (because data can be stored inside the smart camera).  Then, the Local.vi (shown in the figure), on the computer local Windows, receives the string data, it unflattens back to images and records the images in an AVI file. So my question is how can I proceed to receives the string data and save it directly to files with names like 0001.jpg 0002.jpg, etc., automatically instead of using framework for writing to AVI?. I think to use the IMAQ write string that returns a string that contains the entire contents of the image encoded as an image file and the string can be saved to the file (without unflatten it). How can I change the Local.vi?

  Any help, comments help a lot. Thank you.

  
  

• The smart camera target

  Hello!

  I've tried to sort, the abundance of information, it is possible to install the necessary software (CVI RT DURATION, etc.) for cameras 17xx OR program then with CVI?

  Currently, I only installed the software recommended to the target and don't see the CVI runtimes in the installation wizard. The CVI environment reports that I have the correct version of Labwindows CVI Run-Time Engine for installed RT.

  Thank you!

  You can not install a RTE of LabWindows/CVI on a smart or 17xx camera.  If you read the user manual, you can install the software below to target the smart camera.

  Manual smart camera NOR 17xx

  

  If you want to develop in LabWindows/CVI, you will first need to make a script VBAI to deploy it to the target.  Then, you can call the smart camera using the API C VBAI.

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• I recently got an iPad Pro with the intelligent keyboard. Is there another case, that it can be used with the smart keyboard for more protection?

  Is there something else that can be used in conjunction with the smart keyboard from Apple for my iPad Pro?

  What about the back/rear of Apple/cover for iPad Pro?

  http://www.Apple.com/shop/product/MK0D2ZM/A/iPad-Pro-silicone-case-charcoal-gray? FNODE = 9 a.

• Hi people! Can someone advise me something in Lightroom please CC.  When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  Can someone advise me something in Lightroom please CC. When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  I guess you mean "Export with previous. If so, open the export page. It will be defined as "precedent".

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Save to USB audio in sync with the Facetime camera on FCPX

  Hello!

  So, I try to record video of a solo concert using the Facetime camera integrated on my MBP mid-2012, but using a USB audio device. I know I can use the function "voice over" Adding audio afterwards, but which then leads to an irritating noise constantly sync it all together...

  Is it possible (which I don't currently see) to save the external audio of the screen when I import video of the Facetime camera? Or y at - it another way to do it altogether?

  Thank you!!

  YYou can if you can set the audio input in system preferences.

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Why the host computer is unable to connect to the smart camera on the network?

  My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer.  The two are running VBAI 2011.  The camera has been moved to another location on the network and another computer is used as the host? The host is connected to the wireless network.  The camera works fine when connected directly to the back of the computer.  Thank you.

  Hi Joel,

  Yes, it makes sense.  I noticed a corellation when I am set up and where I lose the connection.

  Thank you.

  Rob

• Windows Update error Code 800F0219 with the creative camera direct

  Original title: Code 800F0219

  This update has to do with Creative direct from the camera and the complete error code is: Creative Technology Ltd. - Streaming Media and Broadcast - Creative Live! Camera

  Download size: 285 KB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  Creative Technology Ltd. Streaming Media and broadcast software update released in August 2009

  More information:

  http://winqual.Microsoft.com/support/?DriverID=20293226

  Help and Support:

  http://support.Microsoft.com/select/?target=hub

  In addition, there was a mistake with the number 643: Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2742597)
  Download size: 15.3 MB
  You may have to restart your computer for this update is taken into account.
  Update type: Important
  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
  More information:
  http://go.Microsoft.com/fwlink/?LinkId=261907
  Help and Support:
  http://support.Microsoft.com

  Hello Arnold,.

  Thanks for posting your query in Microsoft Community.

  According to the description, you are facing problems with installation of update for Live Creative Camera and receive error code 800F0219.

  In order to quickly provide a solution, please answer these questions:

  1. is the issue with this particular update?

  2. What is the full error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest following the steps listed in the article and check if it works.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Method 2: I suggest to perform the clean boot and then try to install the update.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Need help with the Smart Wifi EA6400 association

  I set my router several months ago using the password provided with the Quick Start Guide. I have never changed the password. I have implemented all our family computers, laptops and iphones using the same password and have never had any problems of access to the internet. Two weeks ago I put in place our new Sony smart tv by using the same password without any problem.

  Until today, I had never set up a Smart Wifi account. Now that I did it, I can't associate my router on the account. He repeated to me that my password is not valid. How this can be when I was able to implement using this password. Even the properties of the router is showing this same password. I am trying to get into the router to set up a password for comments.  After reading a bit on the forums, I have even tried using "admin" and which was too disabled. I am at a loss here and need advice on how to proceed.

  Hi Stormy_01. By combining the Smartwifi account to your router, do not use the password you use to connect wireless. It should be the password to access the router configuration page. By default, the password of the router is "admin". If it does not, then go to this page I gave in the previous answer and click on the 'Forgotten password' option that should send you the link on how to reset the password of the router to your email.

  Furthermore, the rest of wireless devices are connected properly and are now working through the router, is that correct? If so, then we only need to focus on the recovery of the password in the configuration page or edit if you can access your settings. If all else fails, your last option is to reset the unit and start from scratch.

  Liezl-10104

  Linksys technical support

• faced with the front camera

  When the superior auto mode, you can not use hdr for the rear camera. But faced with the camera before the automatic mode allows you to choose hdr in the settings. Is this a bug problem or software?

  This isn't a bug. Unfortunately, the HDR is not available in this mode. If you want to use HDR for the rear camera, you must use the manual mode.

• With the Canon cameras and embedded image C40

  Hi all

  I got a Cisco C40. We have two cameras Canon XA25 already in place (for a different application).

  Ideally, we would use the guns. Separate us and stream video to the guns to goto C40. Can we push the two cameras of the whole (at the other end)? So that the main camera to feed with a secondary camera to power on this subject?

  Faraz.

  As Patrick said, the C40 does not support showing two cameras at the same time.  The functionality of "Composer" who can do is available on larger end C60, C90 or SX80 points, but not the baby end points.  The provisions on greater endpoints and can be manipulated with the software to the Console of TC .

  But, for your solution, you can feed two outdoor cameras on an external device of picture-in-picture, then just feed one "camera" food to the endpoint.  We do this for many years with various devices in a number of our rooms and on several mobile camera VC carts, back in the old days with old devices analog 4:3 (Kramer PIP-200XL) and, more recently, with lots of cameras HD and PiP (Extron DVS 605).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.