CS4 Question of color fill

Similar Questions

• I'm getting white gaps between the black contour lines and color fill on laser printer

  I'm getting white gaps between the black contour lines and color fill on laser printer

  You're welcome, Calotypist.

  Illy prefer PostScript because it gives you a reliable/complete (more) reproduction (depending on the version, you can also see (more) complete print failure).

  With a PDF basically tell you the printer where to put the points/tasks. Without it, the printer (pilot) has to figure (some) outside.

  If you can get one for the printer in question, a printer PostScript (emulation) driver will leave you direct printing.

• in the color fill layer is go gray instead of sellected color

  Hi, did anyone know what is happening with the color fill layer? an exclamation point appears over the top of the half, that is the new color and a block on the lower half, and when I click ok the color fill layer is always grey

  I suspect that you are in grayscale. Go to Image > Mode and change to RGB.

• Color fill in Adobe 'Flash' CC

  In Adobe Flash CC (CS 5: 5-6) how to use the pen and make a color fill on a random shape, that you created?

  Okay then... after hours of this concern was on my shoulders, I approached finally the solution. First, take your tool "pen" & create your image, go to your selection tool and then click in your pictures fill area (you should see a preview of the blue box around your whole image now), go to the bucket & give it a color of your choice!

• How to get the fill color of a shape or solid color fill layers?

  Hi all

  I'm trying to get the values of the fill color of a shape or solid color fill layers.

  I get the nature of the layer active i.e. SOLIDFILL, but there is no color as a property to get the color of the shape or solid color fill layers.

  Y there is it possible or a script to do this?

  Please help me on this.

  Thank you
  AI

  I didn't bother to check the type of the active layer, but if a solid color layer is selected it should help.

  // based on code by michael l hale;
  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  var layerDesc = executeActionGet(ref);
  var adjList = layerDesc.getList(stringIDToTypeID('adjustment'));
  var theColors = adjList.getObjectValue(0).getObjectValue(stringIDToTypeID('color'));
  var str = '';
  for(var i=0;i		   

• Strange color fill problem

  I'm having a strange problem in my version of Fireworks MX 2004. When I try to color fill a selected area of an existing image and I chose a specific web-safe color, filled it with a completely different color. For example, I am filling my bitmap with a green color (#666600), but it is filled with a blue color (330066 #). If I select another color in green, the color to another color changes. This problem occurs with the color fill tools... Paint bucket, Brush tool, pencil, etc.
  
  I have no idea why this is happening, so if anyone can help me, it would be greatly appreciated. Thank you.

  I found a work around for this problem, and I thought that after she. I saved the image to gif, then selected and filled color area. It has worked well. I guess it was something to do with her being a bitmap image. In any case, it's all good. Thanks anyway.

• Question of color transparent sample CS4

  If anyone can help I would really like to know how I can taste a transparent color.  I'm not talking sampling of the opaque original but the resulting color of transparency on top.  Now the SHIFT with the pipette selects only the opaque color, same result when I double click on the eyedropper tool and pleasant with the settings.

  No direct way I know. You can do this:

  1 rasterize the work; do not use the effect, you must actually object > rasterize, and then undo after

  2. the object of interest to you and to check playback in the color shift-sample Panel

  You can also save the file in PDF format and check the read Acrobat Pro.

• Question of color Panel (CS4)

  It's more of a thing of curiosity to mission-critical, but this is:

  If you have a color, as you know, it appears in the Panel of color with a slider to adjust the tint. You can click the CMYK icon to show the distribution in four colors.

  But is it possible to return to the display of the cursor?

  Click on the swatch in the swatch Panel and it will give you the back sliders.

• Question on color background with other objects

  I'm new to this forum and I am very new to illustrator program. I realize that this may be a basic question and stupid it is obvious to most everyone else here but put into perspective my skills. I am doing a project for my base class of graphic design in my community college and I do could be done better by someone in the kindergarten. He looks terrible.

  in any case, I tried to set the background color to a 8.5 x 11 in. project and I know that I can add the background color with a rectangle on the entire space and fill it with a color. My question is how can you put other objects from the background of different color on top a blue (or any color besides)? For example, I put a black circle on the top blue background but it disappears behind the blue, so you can't see the circle. I tried to reduce the opacity of the background blue, but it doesn't look good. I want to be 100% opacity blue. I just need to know how to put things on top of the background color. I'm using CS5 passing.

  Any help would be appreciated. Thank you.

  You have the mode draw behind? If so, change it at the bottom of the tool palette, or press SHIFT D.

• Newbie question of color management

  Hi people

  using cs4. just finished a CMYK job on a new press. colors on the final print job were pretty loyal to what I saw on my screen when you design, with a few exceptions I want to tweak if possible. I'm new to color management, so looking for some advice.

  According to my research, the right thing to do is to ask a colorsync or icm or icc of my press profile. I did... but my press was a little confused and sent me a bunch of .icc files and I don't know that one to load. people in the press are great people and it's a good press, but I had the feeling that they have not been asked this question a lot. so I ended up using U.S. web coated (swop) v2 profile, which is what they recommended in the end.

  so if I can't get one of my press icc profile, the other approach according to my research wing and adjust the color on my own profile so that what I see on my screen match the printed output. in other words, I take the printed output and hold it up to my screen and manually adjust the color profile settings. I think that this is done in photoshop under edit-> assign the profile and/or edit-> color settings, and then synchronize the color management for all applications using the bridge. Maybe it is possible in indesign? I ask the question on this forum because of the excellent answers that I'll be back here.

  I don't want to screw things up and I'm a newbie with this, then advice out there? My basic situation is that the colors were reasonably loyal but there was a very curious thing where a c = 0, m = 0, y = 35, k = 15 color looked very green on the printed page even if it was a soft yellow on my monitor. I want to try to adjust that.

  Thank you...

  You have a colorimeter and monitor profiling software? It is the starting point of all color management workflow. You also need a pretty good monitor that CAN be calibrated. If the monitor isn't showing you exactly the colors, then nothing do you will to matter.

  Matching the print monitor is an old technique that works only when you have a closed loop where all the work is output on the press even under the same conditions. The purpose of the peripheral use independent publishing spaces, such as Adobe RGB, which is in theory everything correctly calibrated monitor will display the same image, and you can convert any space of output known at the time.

  Terms like watching soft yolks are quite subjective, so I don't know what you expected, but I do not expect 35y, 15 k to be very clear, nor very yellow. While I would not characterize as green color on my monitor, it is certainly not resemble a banana, and beside a clear yellow could be called it greenish in comparison. It's really a yellowish gray clear, in my view.

  I put up a comparison here to see what it looks like, but the colors won't be accurate in a browser.

  

• When the URL bar is the treatment his research, a fluorescent green color fills the bar for a few seconds. How to change or get rid of the color? It is hurting my eyes.

  I would like to get rid of the bright green color that fills the status bar whenever I search something.

  This feature can be added by the extension of the State-4-Evar (Tools > Modules > Extensions).
  
  You can check this extension Options, if you want to disable the progress indicated in the address bar.

  • Evar-4-status: https://addons.mozilla.org/firefox/addon/235283/

• Color fill problems

  Is anyone else having problems with the fill color of the cells?  Once I have fill a cell, I often can't change.  It is super glitchy.  It will allow me to change the color maybe once out of ten, or perhaps when I close and re-open the page... or maybe not at all. Curious to know if this is a bug known or just my bad luck.  Thank you!

  -BH

  Hi the Heeler border,

  How do you try to change your fillings? What Version of numbers do you run?

  I remember that in the past the Palace of color would work not all means the way I expected. I think I've changed my ways and I think that numbers can also work a little differently. I'm under 3.6.1 numbers in El Capitan.

  When I click in a cell to change the fill, if the color palate is open it is not related to the filling of this cell, even if it displays the same color. I need to reopen the mouth with the selected cell, or choose one of the colors in the Palace of popup.

  

  Quinn

• Blue color fills both sides of storm 9550

  How to fix the screen fill with the color blue in blackberry storm9550 when compiled with JDE 4.5 & eclipse

  I'm designing construction supporting 4.5 and above, but the device of storm get only the blue background what will be the solution for those who can one can help me (I tried with the sample, but the samples also has some blue in it") here, I enclose the corrections below

  Search for entries of the forum on "compatibility mode".

  Your storm runs your code 4.7 pre compiled in compatibility mode.

• find out all the line last character and color fill

  Dear friend,

  I need to find all the last character and fill color of line (no need to the last character of words).

  My code problem: no space in the last character is not the fill color.

  My code is below:

  var myDocument = app.activeDocument;  
  var myLine = myDocument.stories.everyItem().lines.everyItem().getElements();  
  for(i=0; i<myLine.length; i++)  
  {  
      var myCon = myLine[i].texts[0].contents;  
      if(myCon.match(/\n| /gi) != null){  
          try{  
              if(myLine[i].characters.item(-2).fillColor = myDocument.colors[2]);
              }catch(e){}  
          }  
      }  
  

  My screenshot as below:

  

  Please suggest a friend

  Thanks in advance

  KS

  Add a ' if else ' statement to apply the fill color to the second to the last character only if the last character is a space. otherwise apply the fill color for the last character.

  myDocument var = app.activeDocument;

  myLine var = myDocument.stories.everyItem ().lines.everyItem () .getElements ();

  for (i = 0; i

  {

  Chantal var = myLine [i] .texts [0] .silence;

  If (myCon.match (/ \n| IM)! = null) {}

  try {}

  If (myLine [i].characters.item-(1) .silence == "'" ") {}

  myLine [i].characters.item-(2) .fillColor = myDocument.colors [2];

  } else myLine [i].characters.item-(1) .fillColor = myDocument.colors [2];

  } catch (e) {};

  }

  }

• Question: CP9: color of the web page outside of the project area.

  CP9, HTML5, output only.

  Hello

  Question: How can I change the color of the web page outside of the project area?

  I want that my projects in 100% white as in example 1.

  I tried changing all kinds of options on the slide master and made sure that both projects have the same settings, but I still get a gray color as in example 2.

  (If the solution is to edit the index.html file or any other file I'm happy about it).

  Any help will be much appreciated.

  Thank you

  Peter.

  Example 1

  This project page is 100% white.

  

  Example 2

  This is another project, but the page outside of the project area is a very pale gray.

  

  Hi Peter,.

  You can change the color of the HTML box around the Captivate project from:

  1. in the menu bar, click themes and select the skin editor.

  2. in the skin Editor window, open the borders page (second means of icon on the left, under the name of skin).

  3. in the theme section, specify the background color of the HTML.

  This solves your question?