Savings login/password FTP in remote site info
Anyone know why, when I am by the 'place' or 'sync' my remote login/password goes?is - this dw 8?
If yes - get the 8.02 updater from the adobe.com site
--
Alan
Adobe Community Expert, dreamweaver
http://www.Adobe.com/communities/experts/
Tags: Dreamweaver
Similar Questions
-
Remote Site lost when closing Info
I created my remote site, everything has worked perfectly, put a few files, no problem. Then I closed DW, DW reopened and the fields login and password of my site (in the Site definition |) Advanced | Remote Info) are empty... I have to get this info * everytime I open DW *. Any ideas?For the record, the version of IE7 beta 2 available today (25 April 2006) does not have this problem! So, if you want / need to run IE7 and Dreamweaver 8, uninstall the * old * preview beta 2 and then install the * new * beta 2. HTH someone out there...
-
Let's say I have use a hotspot with a Web portal to connect to it on a regular basis (in my case, hotsplots). Connections are valid only for a certain period of time, so after a while, I need a new login and password. FF (latest version of Android, current Nexus 4) recorded it for me, but after a while, the drop-down list with all the login/password combinations took so long, it's hard to remember that it is the active connection and soon the list is longer as the size of the screen allows. I don't see a way to remove a login/password unique for an individual site, google search gave no results to my surprise. Please let me know if there is a case for bugzilla, I'd be happy of the present.
True, but it is a workaround - and since some data private revelations are not as confidential as it may seem, I am hesitant to install third-party applications. I'll mark this as resolved issue and request a feature to the dev team - thank you.
-
Establish a IPsec VPN connection, but remote site can't ping main office
Hi, I set up connection from site to site IPsec VPN between cisco 892 (main site) router and linksys router wrv210 (remote site). My problem is that I can ping network router wrv210 lan of my main office where is cisco 892 router, but I cannot ping the main site of linksys wrv210 lan (my remote site).
My configuration on the cisco 892 router:
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
game group-access 103
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-3
game group-access 106
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-2
game group-access 105
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-5
game group-access 108
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-4
game group-access 107
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-7
group-access 110 match
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-6
game group-access 109
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-9
game group-access 112
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-8
game group-access 111
type of class-card inspect entire game SDM_AH
match the name of group-access SDM_AH
type of class-card inspect entire game SDM_ESP
match the name of group-access SDM_ESP
type of class-card inspect entire game SDM_VPN_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the SDM_AH class-map
corresponds to the SDM_ESP class-map
type of class-card inspect the correspondence SDM_VPN_PT
game group-access 102
corresponds to the SDM_VPN_TRAFFIC class-map
type of class-card inspect entire game PAC-cls-insp-traffic
match Protocol cuseeme
dns protocol game
ftp protocol game
h323 Protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
inspect the class-map match PAC-insp-traffic type
corresponds to the class-map PAC-cls-insp-traffic
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-10
game group-access 113
type of class-card inspect all sdm-service-ccp-inspect-1 game
http protocol game
https protocol game
type of class-card inspect entire game PAC-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence ccp-invalid-src
game group-access 100
type of class-card inspect correspondence ccp-icmp-access
corresponds to the class-ccp-cls-icmp-access card
type of class-card inspect correspondence ccp-Protocol-http
match class-map sdm-service-ccp-inspect-1
!
!
type of policy-card inspect PCB-permits-icmpreply
class type inspect PCB-icmp-access
inspect
class class by default
Pass
type of policy-card inspect sdm-pol-VPNOutsideToInside-1
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class type inspect sdm-cls-VPNOutsideToInside-2
Pass
class type inspect sdm-cls-VPNOutsideToInside-3
Pass
class type inspect sdm-cls-VPNOutsideToInside-4
Pass
class type inspect sdm-cls-VPNOutsideToInside-5
Pass
class type inspect sdm-cls-VPNOutsideToInside-6
inspect
class type inspect sdm-cls-VPNOutsideToInside-7
Pass
class type inspect sdm-cls-VPNOutsideToInside-8
Pass
class type inspect sdm-cls-VPNOutsideToInside-9
inspect
class type inspect sdm-cls-VPNOutsideToInside-10
Pass
class class by default
drop
type of policy-map inspect PCB - inspect
class type inspect PCB-invalid-src
Drop newspaper
class type inspect PCB-Protocol-http
inspect
class type inspect PCB-insp-traffic
inspect
class class by default
drop
type of policy-card inspect PCB-enabled
class type inspect SDM_VPN_PT
Pass
class class by default
drop
!
security of the area outside the area
safety zone-to-zone
zone-pair security PAC-zp-self-out source destination outside zone auto
type of service-strategy inspect PCB-permits-icmpreply
zone-pair security PAC-zp-in-out source in the area of destination outside the area
type of service-strategy inspect PCB - inspect
source of PAC-zp-out-auto security area outside zone destination auto pair
type of service-strategy inspect PCB-enabled
sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
!
!
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800
ISAKMP crypto key address 83.xx.xx.50 xxxxxxxxxxx
!
!
Crypto ipsec transform-set ESP-3DES esp-3des esp-md5-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description NY_NJ
the value of 83.xx.xx.50 peer
game of transformation-ESP-3DES
match address 101
!
!
!
!
!
interface BRI0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
!
interface FastEthernet0
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface FastEthernet4
!
!
interface FastEthernet5
!
!
FastEthernet6 interface
!
!
interface FastEthernet7
!
!
interface FastEthernet8
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
automatic duplex
automatic speed
!
!
interface GigabitEthernet0
Description $ES_WAN$ $FW_OUTSIDE$
IP address 89.xx.xx.4 255.255.255.xx
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
outside the area of security of Member's area
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
!
interface Vlan1
Description $ETH - SW - LAUNCH INTF-INFO-FE 1 to $$$ $ES_LAN$ $FW_INSIDE$
IP 192.168.0.253 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
IP nat inside
IP virtual-reassembly
Security members in the box area
IP tcp adjust-mss 1452
!
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 89.xx.xx.1
!
SDM_AH extended IP access list
Note the category CCP_ACL = 1
allow a whole ahp
SDM_ESP extended IP access list
Note the category CCP_ACL = 1
allow an esp
!
recording of debug trap
Note access-list 1 INSIDE_IF = Vlan1
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 192.168.0.0 0.0.0.255
Access-list 100 category CCP_ACL = 128 note
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip 89.xx.xx.0 0.0.0.7 everything
Note access-list 101 category CCP_ACL = 4
Note access-list 101 IPSec rule
access-list 101 permit ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
Note access-list 102 CCP_ACL category = 128
access-list 102 permit ip host 83.xx.xx.50 all
Note access-list 103 CCP_ACL category = 0
Note access-list 103 IPSec rule
access-list 103 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 104 CCP_ACL category = 2
Note access-list 104 IPSec rule
access-list 104 deny ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
access-list 104. allow ip 192.168.0.0 0.0.0.255 any
Note access-list 105 CCP_ACL category = 0
Note access-list 105 IPSec rule
access-list 105 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 106 CCP_ACL category = 0
Note access-list 106 IPSec rule
access-list 106 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 107 CCP_ACL category = 0
Note access-list 107 IPSec rule
access-list 107 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 108 CCP_ACL category = 0
Note access-list 108 IPSec rule
access-list 108 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 109 CCP_ACL category = 0
Note access-list 109 IPSec rule
access-list 109 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 110 CCP_ACL category = 0
Note access-list 110 IPSec rule
access-list 110 permit ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 111 CCP_ACL category = 0
Note access-list 111 IPSec rule
access-list 111 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 112 CCP_ACL category = 0
Note access-list 112 IPSec rule
access-list 112 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 113 CCP_ACL category = 0
Note access-list 113 IPSec rule
access-list 113 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
not run cdp
!
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 104
--------------------------------------------------------
I only give your router cisco 892 because there is nothnig much to change on linksys wrv210 router.
Hope someone can help me. See you soon
You can run a "ip inspect log drop-pkt" and see if get you any what FW-DROP session corresponding to the traffic you send Linksys to the main site. Zone based firewall could be blocking traffic initiated from outside to inside.
-
Hello
I'm trying to solve a problem with the VPN, and I hope that someone could give me a helping hand.
We have 3 offices, each with an ASA 5505 like the router/firewall, connected to a cable modem
(NC Office) <----IPSEC----->(office of PA) <----IPSEC----->(TC Office)
Internally, we have a full mesh VPN, so all offices can talk to each other directly.
I have people at home, by using remote access VPN into the Office of PA, and I need them to be able to connect to two other offices there.
I was able to run for the Office of CT, but I can't seem to work for the Office of the NC. (I want to say is, users can remote access VPN in the PA Office and access resources in the offices of the PA and CT, but they can't get the Office of NC).
Someone could take a look at these 2 configs and let me know if I'm missing something? I am newer to this, so some of these configs do not have better naming conventions, but I'm getting there
PA OFFICE
Output of the command: "show run".
: Saved
:
ASA Version 8.2 (5)
!
hostname WayneASAnames of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 70.91.18.205 255.255.255.252
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
75.75.75.75 server name
75.75.76.76 server name
domain 3gtms.com
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
inside_access_in of access allowed any ip an extended list
IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.2.0 255.255.255.0
IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0
RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0
RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.5.0 255.255.255.0
out_access_in list extended access udp allowed any SIP host 70.91.18.205 EQ
out_access_in list extended access permit tcp any host 70.91.18.205 eq 5000
out_access_in list extended access permits any udp host 70.91.18.205 range 9000-9049
out_access_in list extended access permit tcp any host 70.91.18.205 EQ SIP
out_access_in list extended access allowed object-group TCPUDP any host 70.91.18.205 eq 5090
out_access_in list extended access permit udp any host 70.91.18.205 eq 5000
Note to outside-nat0 access-list NAT0 for VPNPool to Remote Sites
outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.2.0 255.255.255.0
outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.5.0 255.255.255.0
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU----IPSEC----->----IPSEC----->
IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside-nat0
inside_access_in access to the interface inside group
Access-group out_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 1 corresponds to the address IPSec_Access
card crypto IPSec_map 1 set peer 50.199.234.229
card crypto IPSec_map 1 the transform-set VPNTransformSet value
card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
card crypto IPSec_map 2 set pfs Group1
card crypto IPSec_map 2 set peer 98.101.139.210
card crypto IPSec_map 2 the transform-set VPNTransformSet value
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
IPSec_map interface card crypto outside
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.199.234.229
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 60
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.100 - 192.168.1.199 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal RemoteTunnel group strategy
attributes of Group Policy RemoteTunnel
value of server DNS 75.75.75.75 75.75.76.76
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
dfavier vUA99P1dT3fvnDZy encrypted password username
username dfavier attributes
type of remote access service
rduske vu0Zdx0n3oZWFSaX encrypted password username
username rduske attributes
type of remote access service
eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
lestofts URsSXKLozQMSeCBk username encrypted password
username lestofts attributes
type of remote access service
jpwiggins 3WyoRxmI6LZjGHZE encrypted password username
username jpwiggins attributes
type of remote access service
tomleonard cQXk0RJCBtxyzZ4K encrypted password username
username tomleonard attributes
type of remote access service
algobel 4AjIefFXCbu7.T9v encrypted password username
username algobel attributes
type of remote access service
type tunnel-group RemoteTunnel remote access
attributes global-tunnel-group RemoteTunnel
address pool VPNPool
Group Policy - by default-RemoteTunnel
IPSec-attributes tunnel-group RemoteTunnel
pre-shared key *.
tunnel-group 50.199.234.229 type ipsec-l2l
IPSec-attributes tunnel-group 50.199.234.229
pre-shared key *.
tunnel-group 98.101.139.210 type ipsec-l2l
IPSec-attributes tunnel-group 98.101.139.210
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:6d1ffe8d570d467e1ea6fd60e9457ba1
: endCT OFFICE
Output of the command: "show run".
: Saved
:
ASA Version 8.2 (5)
!
hostname RaleighASA
activate the encrypted password of Ml95GJgphVRqpdJ7
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
192.168.5.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 98.101.139.210 255.0.0.0
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS server-group DefaultDNS
Server name 24.25.5.60
Server name 24.25.5.61
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
Shelton_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
out_access_in list extended access permit tcp any host 98.101.139.210 eq www
out_access_in list extended access permit tcp any host 98.101.139.210 eq ftp
out_access_in list extended access permit udp any host 98.101.139.210 eq tftp
out_access_in list extended access udp allowed any SIP host 98.101.139.210 EQ
out_access_in list extended access permit tcp any host 98.101.139.210 eq 5090
out_access_in list extended access permit tcp any host 98.101.139.210 eq 2001
out_access_in list extended access permit tcp any host 98.101.139.210 eq 5080
out_access_in list extended access permit tcp any host 98.101.139.210 eq ssh
out_access_in list extended access permit tcp any host 98.101.139.210 eq 81
out_access_in list extended access permit tcp any host 98.101.139.210 eq 56774
out_access_in list extended access permit tcp any host 98.101.139.210 eq 5000
out_access_in list extended access permit tcp any host 98.101.139.210 eq 902
out_access_in list extended access permit tcp any host 98.101.139.210 eq netbios-ssn
out_access_in list extended access permit tcp any host 98.101.139.210 eq 445
out_access_in list extended access permit tcp any host 98.101.139.210 eq https
out_access_in list extended access allowed object-group TCPUDP any host 98.101.139.210 eq 3389
out_access_in list extended access allowed object-group TCPUDP range guest 98.101.139.210 5480 5487
out_access_in list extended access permits any udp host 98.101.139.210 range 9000-9050
inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0Access-group out_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 98.101.139.209 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac WayneTransform
Crypto ipsec transform-set esp-3des esp-md5-hmac SheltonTransform
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto IPSec_map 1 corresponds to the address Wayne_Access
card crypto IPSec_map 1 set pfs Group1
card crypto IPSec_map 1 set peer 70.91.18.205
card crypto IPSec_map 1 the transform-set WayneTransform value
card crypto IPSec_map 2 corresponds to the address Shelton_Access
card crypto IPSec_map 2 set pfs Group1
card crypto IPSec_map 2 set peer 50.199.234.229
card crypto IPSec_map 2 the transform-set SheltonTransform value
IPSec_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.5.100 - 192.168.5.199 inside
dhcpd dns 24.25.5.60 24.25.5.61 interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
tunnel-group 50.199.234.229 type ipsec-l2l
IPSec-attributes tunnel-group 50.199.234.229
pre-shared key *.
tunnel-group 70.91.18.205 type ipsec-l2l
IPSec-attributes tunnel-group 70.91.18.205
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:3d770ba9647ffdc22b3637e1e5b9a955
: endHello
I might have found the problem.
To be honest, I'm a little tired and concentration is difficult, especially when access between multiple device configurations. So second pair of eyes is perhaps in order.
At the moment it seems to me that this configuration is the problem on the SITE of PA
IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
This is an ACL that defines networks the and remote for a connection VPN L2L.
Now, when we look at what connection VPN L2L this belong we see the following
card crypto IPSec_map 1 corresponds to the address IPSec_Access
card crypto IPSec_map 1 set peer 50.199.234.229
card crypto IPSec_map 1 the transform-set VPNTransformSet value
Now, we see that the peer IP address is 50.199.234.229. Is what site this? The IP address of the CT Site that works correctly?
Now what that said the ACL line I mentioned more early basically is that when the 192.168.10.0 network 255.255.255.224 wants to connect to the network 192.168.5.0/24 should be sent to the CT Site. And of course, this should not be the case as we want traffic to go on the NC Site
Also worth noting is that on the SITE of the above connection is configured with the '1' priority so it gets first compared a connection. If the VPN L2L configurations were in different order then the VPN Client connection can actually work. But it's just something that I wanted to point out. The actual resolution of the problem, of course, is to detach the configuration which is the cause of the real problem in which ASA attempts to route traffic to a completely wrong place.
So can you remove this line ACL of the ASA of PA
No IPSec_Access access list extended ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
Then, test the VPN Client connection NC SITE again.
Hope that this will finally be the solution
-Jouni
-
How to reconnect my remote site after that Dreamweaver has been charged on my computer?
Once a system restore and Dream Weaver reloading I lost connection to my remote. All files the and remote are in place but the updated not validated at the remote site files? I don't want to reload all Web pages, because they are all on the server. Any way to re-login again? I tried to use manage sites to establish connections, but it does not work.
Seems to me that you can download in the wrong place, or you can have a case mismatch in the name of the file.
Make sure you have the root directory defined correctly in your FTP credentials and that you do not have this directory appear anywhere in your local files.
For example, if the root directory of your site is "public_html" it must show in the field of root directory / Directory FTP host your site and NOT in the files of the window list. If it appeared also in your files window, you would be able to find your new pages at www.yoursite.com/public_html, which is obviously not wanted.
Another question may miss the root of the server entirely, in this case, your files would be downloading to a top directory of your site on your server and totally inaccessible to the world online.
A mismatch could take effect if you have index.html on the server, but the Index.html or INDEX. HTML on the spot. On Mac and Windows, all 3 of these file names are the same. They are not case-sensitive, but on the server, these are all 3 separate files. If this is the case of the navigation to the INDEX. HTML will give you the correct page online because it does not replace index.html.
For this reason, it is always best to use lowercase names only when you are working online.
-
How can I monitor hyperic several remote sites with hyperic?
We have implemented a hyperic server in AWS.
We have a lot of remote sites with a server on site. Each site has its own public static IP address.
Here is how we have implemented hyperic right now:
agent.setup.camIP = static public IP of the server in AWS
agent.setup.camPort = 7080
agent.setup.camSSLPort = 7443
agent.setup.camSecure = yes
agent.setup.camLogin = login
agent.setup.camPword = pass
IP #agent.setup.agentIP = public site
agent.setup.agentPort = 2144
#agent.setup.resetupTokens = no
agent.setup.acceptUnverifiedCertificate = yes
At each site, we have a router that port forwarding on the server. If each server is behind a router and has private static IP such as 192.168.30.101
We have no problem setting up hyperic on the local server, the problem is that Hyperic HQ is overwhelming the servers. He takes the static private ip address and keep overwriting the latest version of the server.
Even if we have different server names and the public IP address different when we put in place the agent, once we have put in place the agent and he start shooting the metrics, hyperic just replaces the last installed server monitoring.
any way to disable the IP address local hyperic traction?
This could be referred as "PIN to a specific IP address" that is required when a platform has multiple NICs or IP address addresses and is accomplished by adding additional guidance to the agent.properties file. Because you specified a specific port of installation, it is better to pin which as well.
agent.listenIp =
agent.listenPort = 2144I suggest that you also uncomment:
#agent.setup.agentIP =
as well as (properly defined):
#agent.setup.unidirectional = no
The setting is described in the header section of the agent.properties file.
# Agent configuration file
#
# The following is the properties of the Agent recognizes:
#
# agent.listenPort
# Default: "2144.
#
# Description: Port that listens to the agent.
#
# agent.listenIp
# Default: «*»
#
# Description: Address that the agent to listen. If the value "*",
# the agent will listen on all available interfaces.1.), you now have:
agent.setup.camIP = static public IP of the server in AWS
agent.setup.camPort = 7080
agent.setup.camSSLPort = 7443
agent.setup.camSecure = yes
agent.setup.camLogin = login
agent.setup.camPword = pass
IP #agent.setup.agentIP = public site
agent.setup.agentPort = 2144
#agent.setup.resetupTokens = no
agent.setup.acceptUnverifiedCertificate = yes2.) stop of the agent:
3.) change this option and add the additional guidance.
agent.setup.camIP = static public IP of the server in AWS
agent.setup.camPort = 7080
agent.setup.camSSLPort = 7443
agent.setup.camSecure = yes
agent.setup.camLogin = login
agent.setup.camPword = pass
IP agent.setup.agentIP = public site
agent.setup.agentPort = 2144
agent.setup.resetupTokens = no
agent.setup.acceptUnverifiedCertificate = yes
IP agent.listenIp = public site
agent.listenPort = 21444.) remove the agent data directory (it is re-created later start)
5.) restart the agent (this will trigger a reconfigure)
6.) I accept agent inventory
-
My Dreamweaver 8 loses the name/password FTP every time it is turned off. Any help please?
It was a known problem in DW 8.0. Update to version 8.0.2.
-
ERROR MSG - 1023040 - partition of remote site: need to understand
Hello
I currently have a problem with the partitions between the two cubes.
Architecture:
database of 80 countries (source)
1 world database (destination)Process:
-Partitions are dynamically created by maxl scripts:-------------------------------------------------------------
the coil $ 1;
Change request comment $2 ' * _batch_ *';
Change the comment to request $4 ' * _batch_ *';
Modify the application of the system $2 load;
Modify the application of the system $4 load;
Change request $2 disable start-up;
Change request $4 disable start-up;
Disable application $2 ALTER connects;
ALTER request $4 disable connects;
/ * Create Transparant Partition between countries in the world cube cube * /.
create or replace the replicated partition $2. $3
AREA
"" S_R_N",
& curr_month,
& local_currency, "D_EURO."
@IDESCENDANTS ("P_Produit"),
@LEVMBRS ("M_Marche", 1), "M_Marche,"
@IDESCENDANTS ("B_Marque"),
@IDESCENDANTS ("U_Sourcing"),
@REMOVE (@DESCENDANTS ("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS ("I_Divers").
@IDESCENDANTS ("NA_Nature"), PCS '
for $4.5 $
AREA
"" S_R_N",
& curr_month,
"D_DEV", "D_EUR."
@IDESCENDANTS ("P_Produit"),
@LEVMBRS ("M_MixClient", 0), "M_MixClient,"
@IDESCENDANTS ("B_Marque"),
@IDESCENDANTS ("U_Sourcing"),
@REMOVE (@DESCENDANTS ("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS ("I_Divers").
@IDESCENDANTS ("NA_Nature"), MCX,
& country_name"
mapped global (", $ 7, 'D_EURO', 'M_Marche' D_) to (W_$ 6, D_DEV, 'D_EUR', 'M_MixClient')
;
update the replicated partition $2. $3 à $4. $5 all data;
Drop partition replicated $2. $3 to $4.5 $;
Change the application $2 start activate;
Change the start application enable $4;
Enable application $2 ALTER connects;
ALTER request $4 activate connects;
Change request comment $2 ' * _enable_ *';
Change the comment to request $4 ' * _enable_ *';
Change the unloading system $2 application;
Modify the application of the unloading system $4;
Spool off;
Disconnection;
"exit";
--------------------------------------------------------Cubes of defragmentation, launch country of replications successively to the cubes world sequentially.
the order of the country is not the same from one month to another.
Treatment is started each month.
S ymptoms :
-Partition fall into the error with the following message is displayed, but not systematically.
Message:MAXL > update replicated partition PGC_ESP. Pgc_esp PGC_MOND. Pgc_mond to all data;
ERROR MSG - 1023040 - remote site [[Wed Nov 29 10:21:03 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error (1023040) remote site msg [[Wed Nov 29 10:21:02 2013] hprx1302 / PGC_ESP / Pgc_esp / PGC_ADMIN / msg of error (1023040) of the remote site [[Wed Nov 29 10:21:01 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error (1042012) network error [32]: can not send data]]].We note that the error occurs in the following cases:
-L'errerur occurs generally when the average ratio of clustering is low. (fragmented cube) for cubes source and / or destination
-How many other replication have been done before: in the remaining replication cube last from 10 to 15.
-We wrong once on the environment of recipe on the first cube with average ratio of 0.96 but clustering server recipe is much less effective.We have noticed that when you perform a defrag cubes source and destination once the obtained error replication of treatment is more grave in error.
Problem: world of cube of defragmentation take 10 hours.We also made the following observation:
-------------------------------------------------------------------------------------
OK/INFO - 1051034 - user [PGC_ADMIN] connection.
Last connection OK/INFO - 1051035 - Friday, November 29, 2013 10:19:46.
OK/INFO - 1053012 - [Pgc_esp] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053012 - [Pgc_mond] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053012 - [54116855] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053012 - [39843334] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [54116855] object.
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [39843334] object.
WARNING - 1241137 - [target] - definition of the Partition is not valid: [cell count mismatch: area [1279464568200] for members of the unit [1] by dimension [63 1 2 1 6 26 7 245 1 37955]].
OK/INFO - 1053012 - [25586652] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053012 - [11329970] object is locked by the user [PGC_ADMIN].
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [25586652] object.
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [11329970] object.
WARNING - 1241137 - [Source] - definition of the Partition is not valid: [cell count mismatch: area [47895484140] for members of the unit [1] by [63 1 6 7 2173 2 17 1 245] dimension].
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [Pgc_esp] object.
OK/INFO - 1053013 - unlocked by the user [PGC_ADMIN] [Pgc_mond] object.
OK/INFO - 1051037 - disconnection of the [PGC_ADMIN] user, active for 0 minutes.
OK/INFO - 1241124 - Partition replaced.
-------------------------------------------------------------------------------------Following these results, we must understand what is happening.
We would like to understand why the scores fall errors?
why we have the "definition of the Partition is not valid" message in the logs when creating the partition?
Kind regards
Oliv.to eq cut may be in the definition of the partition.
245 members in source and target to 245.
-
DW CC2014 doesn't remember the parameters ftp for some sites
Even when remembering the password is checked I have to re - enter the user name ftp and password for some Web sites. It wasn't a problem in previous versions.
I create a new site definition and remove the one that is not known.
Nancy O.
-
How do I change the site settings so I can work on the local computer, not remote site
I have to work on a Web site that was initially set up for 'work on remote site (not recommended)'.
I did a redesign of the site on mylocal computer because I could not go live until I approved it.
How can I combine the old and new sites? I had to use an external ftp program to upload the new files and replace the index page. It all works very well online, but I wish I could put small changes directly from Dreamweaver. So far I can one of my new files put on the remote site through Dreamweaver.
If you have the site files on your local computer, simply create a new definition of site in the normal way. Then delete the old site definition.
A Dreamweaver site definition simply controls how to communicate with the remote server. Deleting a site definition deletes the definition. It has no effect on local files.
-
How to restore a remote site after an accident?
I read the site FAQ management and he mentions to restore your files, you can go to your remote site and upload to your local site.
Any that offered little help for my situation?
I had a hard drive failure, I am running windows xp, dwcs4 and the site is hosted. I reinstalled windows and dw. The site has been created according to all the tutorials and I managed to save a copy of the site folder, but not according to the instructions of the savings in the FAQ. I have root just a folder with all the pages.
Could someone point me to a tutorial or how to?
Thanks in advance
Jim
"I managed to save a copy of the site folder, but not according to the instructions of savings in the FAQ." I have root just a folder with all the pages. »
You lost me here. Not sure what you mean.
Create a new definition of site for the local and remote sites, connect you to your remote site, and then click Get. That's all you need to do.
-
Site Web is updated online, but seem to update the remote site pane?
I use Dreamweaver 8.
I am updating a website I have created initially. I did this summer with success, until I did a major synchronization in order to cleanse the body of some really old files and make the site easier to manage for everyone. Sync seems fine, but got it wrong in the end and ended up with the 'old' mainwebsite file and a mainwebsite file 'new '. I then synced and it deleted the 'old' main site file (which is what I wanted to do).
Now, when I do updates and put them on the remote site... they do not appear online. Update the side "remote" site of the box of files.
I tried to remove the site and then re - get the whole thing as if I've ever been in, but it is not yet published on the web.
When I "re-" the site, he came with the old main site file, so I'm not sure what the field is SEO. The old site file could be hiding somewhere on the FTP?
Any ideas I could try?
Sorry if I don't am not worded this correctly, I am new to Dreamweaver and use this site to learn the basics. Thanks in advance!
You need to be sure the site definitions are contained properly, if we're wrong, local or remote, you will have problems that you have.
http://TV.Adobe.com/#VI+f1592v1760 Watch this video for a better explanation I can give.
Brad Lawryk
Adobe, Dreamweaver community expert
Northern British Columbia Adobe User Group, Adobe user group manager -
all new to dreamweaver (mx... by the way)... having problems with an ftp connection and downloading the files from the local site to the remote site... all the information appears to be entered correctly in the Manager section of site (local site, remote site... I need test site?) I have no problem to download all the old files Web site in dreamweaver , but then when I go to register a new, it will not download the remote site...
what I'm really trying to do is to update an existing site, flash slideshow by adding a few new JPEG images and remove some 'old' and then update all image.xml by a new text files to coincide with the new photos in the slideshow. but when I go to save any work that I have done, it will not save and upload them to the remote site.
any help to solve the problem would be useful...
Thank you
Mike
The error means that DW still think your Checkin/checkout is enabled.
Follow these steps:
1 using the site manager, create a NEW site definition that points to the same
local and remote sites than your original.
2. to connect to the remote site.
3. find and DELETE all instances of *.lck at the remote site.Now, try to import the file. What is going on?
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================='conny b'
wrote in message
News:fndj7u$76t$1@forums. Macromedia.com...
> I just again tried to put a file, and I got this message...
> "another user is currently working on this issue (Please enable the check."
> archiving
(> outside to avoid overwriting changes made by other users). do you want to
> Download
> anyway? »
> I clicked Yes to...
> This is a first... had not seen that til just now all of a sudden... im lost
> like u
> can tell... :)
> id be happy to get the answer to the first question of the remote server time and
> go
> from there if.
> Sorry to bother all the time you guys, but I'm just learning the
> program...
> -
Download error: .css on remote site
I can't download cascading on the remote site style sheets when I try to "put the files. I can move the other files (.html and .jpgs).
I get the following message:
error occurred - error year FTP appeared - can't put. stylesheet.CSS. access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.
What should I do differently when the save or create the css for the site?"happydreamweaver" wrote in message
News:g0uskg$G1C$1@forums. Macromedia.com...
> Yes, my stylesheet file begin with a dot (. stylesheet.css) I saved it as a
> new style sheet stored in the same folder with the rest of the files.Try it without delay at the beginning.
Maybe you are looking for
-
Build web pages on my computer, and before I updated Firefox I could hear the music when I opened the page. Since I updated Firefox music will not play. If I open the page in Internet Explorer, the music plays very well. When I go to my Web site on t
-
After the last update of Skype, I face to great difficulty to chat in Windows PC. If someone me the pings, then I answered and if the person responds to my message, it does not come after my message. It's to come before my message as well as his prev
-
Windows Media Player - error message, does not start
Whenever I try to use Windows Media Player, I get the following error message: "To use Windows Media Player, log out of Windows, log back in and then start Windows Media Player." When I followed the instructions, it does the same thing. He did this
-
How to rotate screen 90 degrees - I read on the side
Somehow my computer screen Dell laptop, Inspiron rotate right 90 degrees while I read on the side with my head tilted to the right. How can I fix it by rotating the screen 90 degrees to the left?
-
Right-click the folder or any other function does not work, and I don't have a sticky key... While I click right click in windows Explorer has stopped working... Help, please!