SBS 2008 installation hangs

Similar Questions

• ServeRaid 8 k driver for TD100 SBS 2008 64 bit

  Hi all

  someone know where I can get the driver mentioned above?

  In the drivermatrix, I found that the driver for sbs 2003

  Greetings from the Germany

  Tom

  Hey Tom,

  Regarding your driver problem, 8 k map requires a specific INF file to install normally on 2008 installs come with 8 k drivers included, but if not, here is the link of things for the file, one you will need to use a floppy disk.

  http://www-307.IBM.com/PC/support/site.WSS/program%20Files/program%20Files/IBM/Quest_Input_Tool/temp...

  As well, I recommend making sure that the 8 k map is updated to the latest firmware so sounds like it might not save the configuration.

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/ThinkServers/fcrad03sr18.exe

  Or the startup version that iBM and Lenvo use is available (I recommend to use this version)

  http://www-947.IBM.com/systems/support/SupportSite.WSS/docDisplay?lndocid=MIGR-5073646&brandind=5000...

• TD100 SBS 2008 OEM.

  I try to install SBS 2008 OEM on TD100 without success.

  TD100

  2 x 250 GB sata

  4 x 750 GB sata

  4 GB of ram

  apparently only works with the verion Easyinstall 1 or 2.

  Any ideas?

  According to the EasyStartup page

  http://www-307.IBM.com/PC/support/site.WSS/easy-start.html

  Technical Council

  If you want to install Windows SBS 2008 operating systems on one of the following systems:

  • ThinkServer TD100/TD100x
  • ThinkServer RD120

  Follow the steps below:

  1. Boot and install with the operating system DVD
  2. Get out to the Lenovo Web site and download and install the drivers for devices from here.

  For a manual installation of Microsoft Windows Server 2008, please click here

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/thinkcentre_software/windows_server_2008.PDF

• Exchange Server 2007 SBS 2008 Service Pack problems

  I am server running Exchange 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2, but it omits the two windows update and manually. Can someone tell me first what version I am running?

  Help / form displays the Exchange Management Console:

  Version 08.01.0436.000

  And repairs on Exchange Server from programs and features shows 2007 SP1 setup. So I think that SP2 to be then I also ran SP3 but it does not work.

  Here are the lines to the end of a journal:

  [05/03/2014 08:54:13] [0] Setup will run the task 'uninstall msipackage.
  [05/03/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage - logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' - '24b2c164-de66-44fe-b468-a46d9d5e6b31'-PropertyValues ProductCode' BYPASS_CONFIGURED_CHECK = 1 DEFAULTLANGUAGENAME = FRA "
  [05/03/2014 08:54:13] [1] start of treatment.
  [05/03/2014 08:54:13] [1] 'PackageName' property is 'EXCHANGESERVER.msi.
  [05/03/2014 08:54:13] [1] remove the MSI package with the code "24b2c164-de66-44fe-b468-a46d9d5e6b31".
  [05/03/2014 09:09:01] [1] [ERROR] an unexpected error
  [05/03/2014 09:09:01] [1] [ERROR] failed to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is ' could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.   Check that you have sufficient access to that key or contact your support team. '.
  [05/03/2014 09:09:01] [1] [ERROR] fatal error during installation
  [05/03/2014 09:09:01] [1] end of the treatment.
  [05/07/2014 19:45:17] [0] end of the installation

  There is a registry key to match and used for the configuration administrator account has access to it, I think? What does this newspaper?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows SBS 2008 - user is unable to RDP in even through that it's in the appropriate groups

  Hi guys,.

  Problem: A user has been accidentally deleted from a Windows SBS 2008 server running Active Directory and we have been unable to grant him the rights of RDP - the error message indicates that the account must be granted "logon through Terminal Services right.

  The installer: A single Windows SBS 2008 server running hyper-VM with a unique virtual machine on it which manages the TS licenses

  Tried to bugs/more information:

  Things that we tried to do to solve the problem (all done via Active Directory users and computers)

  • He added to the administrators and remote desktop users groups
  • He added to the users group to the remote desktop on the virtual machine (the account can now connect to the virtual machine at least)
  • Cloned an existing account on the primary server
  • Removed and added the account through the SBS console and added to the admin and RDP groups (on the dedicated server and virtual machine)

  None of them seems to have solved the problem. There are currently 2 free licenses of TS, so I don't think it's a licensing issue.

  It's almost as if there is a top group policy setting or similar which replaces the user groups is added to, but I don't know where to look for here.

  I've already made sure that the user do not have TS access turned off in the settings of the user's

  Any suggestions?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• SBS 2008 compatibility with OS windows XP/7

  If the server at my workplace computer is running windows SBS 2008, and we have 2 clients running Windows XP Professional, I can configure three new customers with Windows 7. I'm not sure that the it guy who has implemented the network upward originally stated that any installation of computers in the network must run XP and could not be equipped with Windows 7. This system was the installation in July last year, and I am not interested in the purchase of new operating systems for existing customers of 2 and am not able to source XP for 3 additional guests I want to Setup. There will be compatibility problems with the configuration of computers with different OS, and they are all still will have the same functionality with respect to the initial configuration (IE still using the http://connect) and remote access

  Your problem would be probably better suited to the Microsoft Technet forums, located at the:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  They are better directed at Windows Server and other professional level products, repost your problem it would give you better results.

• How to install and configure sbs 2008 on a routable network

  I am trying to install a SBS 2008 with a routable IP address, but whenever I try to run the internet access Wizard it fails when it checks for my router. This system request not routable IP address to complete the installation. I would like to configure the SBS with a domain name registered for AD and use a routable for my server and router IP address

  Thank you, Tony

  Hello, Tony

  For support with Windows Server, please create a new post on the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• Very slow loading of pages with content flash in IE11 in networks of SBS 2008/2011

  Hello

  I have three different customers. Both of them have one with SBS 2008 and SBS 2011 with Win7 Pro 64 clients with Win7 Pro customers.

  These two environments use the default folder Redirection of installation by installing SBS.

  In all these networks, we experience recently that loading web sites with Flash (for example online newspapers) content has slowed down considerably when you use IE11 (Chrome/Firefox works fine).

  To disable Macromedia Flashplayer in IE Addons, the browser can speed up to normal again.

  I tried to reset IE, delete all temporary files and reinstalling Flash, but always without success.

  I assume that others have problems with this as well, as it happened in the three different networks for me...

  Any suggestion is appreciated.

  Update: IE11 reinstalled and the speed is high and will yet :-)

• Shows poor drive on a virtual machine of SBS 2008 under ESXI 4.1

  Hi all

  I'll be back with a question on the locations of files vmdk and best practices.

  With my colleague a great discussion raised about vmdk locations for a virtual machine that runs a heavy installation of SBS 2008. Where to place the files vmdk on the data store, and how to optimize for best performance.

  This is the context. We recently bought a ML350 G6 server with 2 * RAID1 SAS 10 k. We have installed ESXI 4.1 on the first RAID1 array (datastore1) and the second RAID1 array, we created datastore2.

  On the ESXI server, we have created a VM SBS2K8. And here is the discussion:

  We have configured the vitual HDD for this virtual machine as follows:

  DATASTORE1:

  Next to the ESXI installation, we created 1 vmdk where we have installed OS by VM SBS2K8 partition

  DATASTORE2:

  We have created the 2nd vmdk where we have installed the DATA by VM SBS2K8 partition

  For your information, directly after the installation we moved the log files and database Exchange on the second partition on DATASTORE2

  Everything was nice during installation of the virtual machine, also during the installation of SBS 2008. The problems came just after the end of the import of the pst files in the Exchange database (+ / 20 GB for pst all together).

  The virtual machine is so slow, when we try to copy, backup files locally. I checked the performance graph in VSphere Client when we copied the files or backup. The disk latency, data store, virtual disks to the level has exploded.

  This is a point that the console has become completely insensitive during summits...

  My opinion about it, is that it would be better to put 2 vmdk for virtual machine on DATASTORE2, but maybe I'm wrong. That's why I post here we are again.

  All the recommendations, advice, are welcome. I don't know if the problem comes from the design of the virtual machine itself or we forgot something during the installation.

  Is there a good literature on the vmdk files? Location, design...

  Thank you for all your help on this point,

  Michael

  It sounds like you bought the DL350 G6 with P410i controller but no BBWC/FBWC not attached to the writeback operation. Without BBWC/FBWC, you will generally see less of ~ 10-20 MB/s.

  Place the operating system partition and data on different data stores in this case makes no difference at all.

  André

• Exchange 2007 SBS 2008 farm 25 port transport service

  Hello guys,.

  I have the following problem;

  -sbs 2008

  -exchange 2007

  have random closing port 25.

  Restart the result in a code exchange transport service could not stop the service.

  Restart the entire server has solved the problem for abouth 1 day.

  Things I've done,

  -Windows Update Server

  -Exchange of the sp1 update to sp2 to sp3 ROLLUP 17

  -change the opening of transport service for instead of the network administrator account.

  -drive c has 18 GB of free space.

  -imposed d player has 200 GB of free space in the database.

  -restart the transport service result in not able to shut down the service.

  -telnet external to the server on port 25, especially when there is the problem have a black screen. Since today have not yet opening the port.

  I don't know how to solve this problem at this time.

  Restarting daily, this isn't a solution.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2008 STOP: c000021a [fatal system error]

  I found myself, it's a pretty irritating position.

  My SBS 2008 Server has failed and cause me a lot of pain in the process.

  There was a fairly comprehensive backup plan in place, Acronis image (daily), picture Windows system (per day) and Bexec.

  The last test DA we have worked well and I was able to restore the acronis on a virtual machine and start.

  Now, we actually had an error that none of the backups work! All with the same error inside a virtual machine and a physical hardware code.

  The error is:

  

  Action taken:

  Catering to VM

  Load the SBS support to repair the system (it prompt for the password for the Admin user.) Didn't know that he was SBS with AD, we used a different account.)

  Download offline NT password, select Admin and password empty

  Load the SBS support to make the system repair, sfc scan & chckdsk

  Do some reg settings so it does not restart when it BSOD (still can not managed to do a memory dump well.)

  All returned without errors and fine.

  A restart of the same mistake.

  Tried all F8 options, all with the same error. Even safe mode!

  Can anyone suggest me please a few alternatives to get it online so I can connect.

  I had to reinstall the server from scratch so that it is up and running but some settings that I need to the virtual machine that I just thought that I would be able to restore from a previous backup.

  Rob

  Hi Robert,.

  My apologies for the delay in response.

  Issues related to Small Business Server are taken in the TechNet forums. Please ask your question on the forums.

  Hope the information is useful.

• SBS 2008 - Server 2008 site to site vpn problem.

  Hi all

  I have a box of SBS 2008 I want to add another server to the remote site (standard 2008). Currently, VPN works great on SBS and I can compose anywhere via the pptp network and join.

  I added the RRAS branch again 2008 server role. Connection to the configured application, since VPN was already running on SBS, I just added to the request and the road. Both servers have user names Eric their numbering interfaces to, when I connect branch to SBS, he just connects in seconds, get IP address and routes are added, when I check the SBS it appears as inaccessible, when try to connect manually I either get error RRAS 0 or a pop up says the modem is already in use or not properly configured.

  Grateful if someone can the advice that I've spent 2 days on this.

  Thanx

  If you can repost this thread under http://blogs.technet.com/b/windowsserver/, you can get a lot of fruitful discussions, solutions...

• Directory issues active with SBS 2008. Cannot use NTDSUTIL or management tools or make changes to the DNS.

  In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.

  Fast forward to today, June 2013, and now that I see errors in the event log that read:

  «This server is the owner of the following FSMO role, but considers that it not invalid.»

  "This directory server has not recently received replication of a number of directory servers."

  And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
  "Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".

  I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.

  Here is my configuration:

  1 - SBS 2008 Server.

  7 - workstations running Windows 7 Professional

  I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.

  That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.

  Is there someone out there who can help you?

  Thanks in advance for your suggestions

  I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• SBS 2008 cannot connect with the admin account

  Hello

  I have intalled SBS 2008 on my server. Yesterday he installed updates, now I can't connect using my administrator account (it says wrong user name and password). The only way I could log in with my credentials is hollow in Safe Mode.
  The server is used as a controller of domain, MS Exchange and the file and printer sharing. None of these processes work properly. I can access the drives mapped to the user's computer and Office does not connect to Microsoft Exchange.
  I appreciate any help you can give. Thank you.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• SBS 2008 Migration to Server 2008 R2

  Need to a company full of Windows SBS 2008 R2

  Promo DC Server 2008 R2 to join 2008 the SBS domain.

  SYSVOL and netlogon have not been replicated

  Cant DCpromo SBS 2008 DC out

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  The question you have posted is related to Server 2008, it would be better suited in the Technet forums. Please visit the link below to find a community that will support according to your request.

  http://social.technet.microsoft.com/forums/en-US/category/windowsserver/.

  If you have any questions do not hesitate to answer, we would be happy to help.