SBS Server 2003 and Exchange Server - need access, but don't have HARD drive

Similar Questions

• I need to back up an entire hard drive, XP and all

  I replaced a strong record for my neighbor and found myself in a strange position. I need to back up the entire hard drive, so I can replace it with a larger, but cannot start on this disc (when its in my computer) because of a BSOD. I can start in my regular reader (the one I normally use in my computer) and browse the disk I'm trying to backup with no problems. I tried to use Norton Ghost, but when I try to boot from the new drive, I get an error and cannot continue. That I can use that backs up the entire disk, including Windows XP and all the files and allow me to boot from it?

  4ndyC2D,
  Microsoft didn't offer not any type of disc for XP Imaging tool.  At this point, you will need to use a 3rd party program to accomplish the task.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk

  I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk please help

  Hello, sxyria

  Unfortunately, we are unable to provide assistance in bypassing the security or the recovery of passwords.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help to install Photoshop Extended CS5 and Photoshop Lightroom 3 on my macbook. No hard drive! I have serial numbers. I paid $1200 for it

  Need help to install Photoshop Extended CS5 and Photoshop Lightroom 3 on my macbook. No hard drive! I have serial numbers. I paid $1200 for it

  Download the competent installers of Adobe

  Download Adobe Creative Suite 5 products

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 3.6

  Install, then enter your serial numbers.

• Access the data on the hard drive

  My hard drive on my laptop failed.  I replaced and reinstalled windows vista, but I could not access any data on the old hard drive.  I was able to install it as a backup of my desktop computer hard drive and I can see the directory structure, however, whenever I try to access the data in My Documents, I get an error G:\users\moe\documents\my is music is not accessible access is denied.  Any ideas how I can access this information, assuming that it is not a physical problem with the hard drive.  I have the password of windows I used to access the computer, but I don't know how to use it since this drive is not the one I am running windows from.  The computer that I use to access the data on the hard drive is on windows XP, if that makes a difference.

  The computer tries to access the old hard drive and the old hard drive are XP.  It is a forum for Vista.  All the procedures I have on this issue are only for Vista.  You should repost your question in the right place.

  Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where XP experts will be happy to help you to gain access.  I don't know it's just a simple issue of permissions and/or property which can be easily solved with the correct procedures.

  I hope this helps.  If you later need help transfer of data to the Vista machine, then come back here and we will help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• my computer says user is owner and demand a password that I don't have.

  original title: signature distressed

  Hi, I have Windows XP. I've never used a password. When I start it up it opens just windows. Yesterday, we had high speed internet installed. The installation program could not make it work so he called Qwest and they needed him to do something. Now my computer says user is owner and demand a password that I don't have. Qwest says it's our problem. What can I do? Thank you

  Try to connect under the built-in Administrator account.  You will then be able to change or remove the password and/or create other users:

  'Forgotten your Windows XP Home password? "- Part 3: define a new password as an administrator.
    <>http://support.Microsoft.com/kb/894902 >

  HTH,
  JW

• I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  If you can still boot your old disk, you can use a program such as one of them:

  KeyFinder: <> http://www.magicaljellybean.com/ >
  Belarc Advisor: <> http://www.belarc.com/free_download.html >

  to read the key out of your old system.

  Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

  HTH,
  JW

• I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges to add this item.

  How do we change privalages

  I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?

  Hello Victor,.

  Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• files and folders: How can I load all my files and folders to my new account of my external hard drive?

  Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

  Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't access to my (e :)) error Hard Drive e/s external device (0 x 80070057).

  Original title:

  Can't access to my (e :)) external hard drive)

  I connected my Seagate Freeagent drive a couple of days, after a long period of disuse. The first time I opened it, it works beautifully. But after I closed it, it disappeared from my computer. I managed to get the letter drive (e), but can not open it, make a device i/o error (0 x 80070057). I'm at my wits end. I have a lot of personal files on the external hard drive, and I really don't want to lose them. Can someone help me?

  YAY! I finally got to work. Hallelujah! I don't know how I did it, but it works now. I just unplugged the power cord from the unit and waited about 30 seconds, then plugged in again, and it started working again. Sorry to bother any of you nice people. That's great!!!

• Hi, I bought Photoshop and Premiere Elements for windows, but now I have an iMac and want to disable it on the PC and transfer to the iMac programs. Is that possible think even I bought for Windows?

  Hi, I bought Photoshop and Premiere Elements for windows, but now I have an iMac and want to disable it on the PC and transfer to the iMac programs. Is that possible think even I bought for Windows?

  Thanks, but it seems that only work with the latest versions. I have 12 items. Think I need to upgrade, but it's ok.

• I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  Download the installation files and use the serial number, you need to activate.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!