Scan breaks into component pieces

Similar Questions

• Want 4500: jpeg scan breaks into separate files

  When I scan from my desire to 4500 in jpeg mode, it breaks a sweep in separate files. How do I get it to scan a document in a file? I don't have this problem when scanning to PDF files. Thank you.

  Hello

  Thank you for using the forum.

  These relevant videos explain whee you a bad shot.

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

• dissection of an image into several pieces at a time

  Hello forumers.

  I'd like know if I can dissect a picture into several pieces at a time, as in illustrator I can use the tool.ive pathfinder makes a picture with a box

  and as you can see there the lines guides, is there a command in the ps that can make guidelines dissect the image? I know that the guidelines

  can turn into a slice, but it's for the web if im not wrong.

  Thank you.

  Unfortunately, Photoshop doesn't have a pathfinder in Illustrator.

  To break an image (for example: shattered glass), I

  • make a selection (from paths, or channels or layer masks)
  • Order J float a copy of this layer
  • back to my original layer, make a new selection and repeat this operation as many times as necessary.

  Alien Skin Software has a few effects plug-in to do this, but I usually like manually create effects to have a more personal rather than watching canned.

• Download El Capitan into small pieces?

  My data plan allows only 800 MB per day.

  Can I download El Capitan into small pieces for several days, or need to download in a 6 GB file?

  N ° Apple does not split files into small pieces, you can go back. Why not visit the local Apple retailer/dealer and ask them to allow you to make a copy of the file. Don't forget to put a 16 GB USB stick with you that has been partitioned and formatted for Mac. Or you can ask a friend with a best data plan.

• Issue of Satellite A100 - 159 LCD - Photo cut into horizontal pieces

  Hello

  For three days I have very strange problems with the LCD screen on my laptop. Imagine the normal image, cut it into horizontal pieces and place pieces randomly above the other.
  This 'strange' combination vertical rolls on the screen. A few minutes later, he stops and the screen shows me a gradient of one color.

  With a keyboard shortcut, the laptop is on stand-by. With the power on button, the laptop leaves Eve and the screen working again normally.

  It happens once or twice a day...

  An external screen works normal, while the LCD is weird, so I guess there is no problem with the graphics card. Can someone explain this strange behavior?

  One last thing, this laptop 13 months now, so I guarantee expired :-(.

  Thanks in advance,
  Jochen

  (PS English is not my native language, I apologize for the errors and I still think that Toshiba is the best :-)

  Hello Jochen

  According to your explanation of the problem it is probably problem with graphics card. Please understand that simply test with special tools can give you a definitive answer. I don't really know what is the best solution.

  Try to speak with service and ask how much laptop repair cost.

• Divide a large TDMS file into smaller pieces

  Hello

  I'm dealing with a large dataset (5.6 GB) TDMS and wish to perform analyses on this subject in MATLAB. Of course, dealing with this large dataset at once would be impossible in MATLAB, so I need to divide it into smaller pieces.

  I started playing with Diadem to achieve this. I would like to create an automated script that I may need to do this several times in the future. I'm new to VBS but have managed to extract a small amount of data from the data portal and store it in a table. I was wondering how I can then write this data in a file separate from PDM. My amateur code is attached!

  Thanks in advance for any help,

  Matt

  Hi Matt,

  The best way to do is to apply the filter lines you want during the import process, so that you get only the elements of the array that you are interested in as new channels in the data portal - you can do it with the DataFileLoadRed() command.  Then, you can simply save the subset values you wanted (all the content of each channel) to the new export file, which could be a much smaller file of PDM or even a *.mat file if you downloaded and installed the MATLAB use we post free at www.ni.com/dataplugins.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Video playback is divided into 4 pieces and is black and white

  Video playback is divided into 4 pieces and is black and white HELP!

  Hello

  1. you play the videos online? If Yes, what browser you are using?

  2. If you play the video with Windows media player, which is the version of Windows media player you are using?

  3. who is the operating system installed on the computer?

  4. If you play the video with Windows Media player, what is the format of these files?

  Please answer us with more information about the issue to help you.

  If you use Internet Explorer refer to this link: solving video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  If you use Windows Media Player to refer to this link: Fix Windows Media Player video and other media or questions Library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  I hope this helps!

• I recently installed Extended CS6. I shoot always believed. I am trying to open a file in bridge. It dowloads the folder but do not open in bridge or CS6 th eimages, but they open into 12 pieces. My Raw Converter is 7. I HAV etried to day drinking

  I recently installed Extended CS6. I shoot always believed. I am trying to open a file in bridge. It dowloads the folder but do not open in bridge or CS6 th eimages, but they open into 12 pieces. My Raw Converter is 7. I HAV etried to update, but I can't. I did not have this problem before since the installation of the extended version of CS6

  CS6 current versions are perpetual Mac version 10.0.6 version 13.0.1.3 Windows and Mac and Windows version 13.1.2 subscription.  The current version of ACR for CS6 is ACR 9.0 latest ACR has however are not active in any version of CS6.  Brand new available in CS6 camera support.    If you can not CS6 update to the current version of your system you need to fix this problem.

  Photoshop: Basic troubleshooting steps for solving problems more

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Download the CS6 products

• Need for SOUL of breaking into pieces of 4 GB.

  I send a video clip of 25 minutes 1080p24fps via a CF card in the editor.  Would be nice if SOUL had an option to do this.  If so, I don't know.   Looks like my only option is to break the sequence in small sequences myself and export them separately.

  True?

  Next time I'll ask for a disk instead of a card CD external HARD...

  I don't think that the SOUL has that capability directly. I will be corrected, if wrong.

  Instead, just use the WAB (work area bar) to export in the pieces that you need. Since you're dealing with file sizes and no duration, a little bit of math will be required.

  Another possibility would be to use an archiving program like WinRAR to split the file into pieces to your specifications. The recipient should then the program to "mount" the files on their computer.

  Another option would be to ship on a drive external HARD, rather than on a map. Packaging and shipping costs will increase slightly, but this is how to send large files and usually have a couple of external transit at any time.

  Good luck

  Hunt

• A number by breaking into its component bytes

  Hey, guys.

  I am aware of the function of split number. But my problem is a little different.

  Let's say I have a 12-bit byte. It is something like this: 0000-1111-1111-1111 or 0FFF.

  When I use the split number, I get 0F and FF.

  But I intend to have something like this: 0011-1111 + 0011-1111.

  I mean, I want to break my 12bits in a 6 number + 6bits, not in a 4 + 8.

  Should what tools I use to have this result?

  Thank you!

  1 AND 2 ^ 12-1 (12-1) so that you know that you want to keep more low 12 bits (if you want)

  2 AND 2 ^ 6-1 to return the 6-bit low

  3 right-shift 6-bit to return the upper 6 bits

  Or use the rest and the whole quotient.

  Divide by 2 ^ 6, quotient is higher, the rest is less

• Break into pieces and the doubling of files

  The songs on my ablums are spread out and taken into double. How to make back in the sink?

  Hello

  ·        What application are you using to play the song?

  ·        You did changes to the computer before the show?

  ·        Are you referring to the applications or any specific windows library library?

  If you use Windows Media Player, and then follow the steps in the link and check if this may help:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/en-us?EntryPoint=lightbox

• How to get this * projector icon search my phone died before I it break into pieces?

  Get the spotlight search icon off my phone

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• Updated to iTunes 12; now, the music library is dispersed into several pieces

  Hello

  I've recently updated iTunes to version 12, skipping several versions of the application when I replaced my iMac 2008 3 GHz with a MacBook Pro 11.1 2013.  I see that others in this forum have similar problems, but I am not convinced, that this is the same problem, so I write, and I would greatly appreciate your advice.

  On my MacBook today, my iTunes files are broken up as follows:

  (1) on the first level of my internal SSD drive, there is a folder "iTunes" (378 GB).  Inside this file, I see the following:

  a folder "cover art" (945 MB) with several subfolders.

  (b) "iTunes Music" folder (375 GB) that contains records related to specific artists and also a record for television broadcasts;

  (c) there are also some file "iTunes Library" which are several years old and litter may be older versions of iTunes (which I have used since 2002).

  (2) in my file, there is a 'Music' (8 GB) folder, which contains:

  a "iTunes" folder that contains nothing;

  (b) a folder "iTunes 1 ' which contains:

  (1) a folder iTunes Media that contains 'TV shows', 'music' and 'downloads '.

  (2) yet one pouch with several subfolders.

  (3) more trash to iTunes library of old files.

  Recommendations on how to get that stuff in a single folder (or any other effective way)?  Thanks in advance!

  In iTunes prefs - advanced - make sure that the "Keep...". 'and the' copy... "box checked.

  Also check the path on the Advanced tab to see where iTunes makes the files.

  If the items are archived as indicated above, the correct path is: user account > music > iTunes > iTunes Music.

  Music is woven into the iTunes Music folder into folders by artist.

  The iTunes file has other files and folders with different files of old library, Art work etc.

  Do not move things from the Finder, or you may break the links that iTunes has created.

  iTunes is a database manager. Do all what you going to in iTunes and things work better with less chance of missing things.

  As always, you should have a backup of your iTunes in case things go wrong.

  MJ

• want to scan document into word document, says I need XP Professional with FrontPage?

  I want to be able to scan a document into a Word document.   I'm going to start, programs, and he said: scanning of document, but when it initializes said he needs from XP Professional with FrontPage?   where can I download it so I can use the digitization of documents?

  New - depends on the software.  You did not mention the manufacturer or model of the scanner in question - so - even though it is highly unlikely that it's a Microsoft product, no one here can guide you directly to the manufacturer of products FAQ and manuals and forums and others for you show where you can get more information about how to use the scanner in question in the way you want to use.

  So, to simplify things:

  (1) what is the brand of scanner and the model?

  (2) have you installed all the drivers and the software of scanner said manufacturer?

• Image cut into separate pieces

  Dear people,

  I want to cut an image into separate components.

  I have a grid on the image, and in every block of this grid one want to have my image obscured, but separate, so I can move the block up and down while image of the stay to the right position in this block.

  How do I know how this can be done?

  Because I'm at leasy to hidden each block in the grid with the image and it's also bad for my arm.

  Kind regards
  
  Brown

  No problem if you can write a Javascript script. Second best, however, knows someone who can

  Copy & paste the script below into a text editor; save it somewhere as "MakePuzzle.jsx". In the case of doubt: complete instructions on how, where and why can be found on the web of p - p.

  Make sure that you have everything what you want Grid-ify - not necessary if your 'image' is an imported bitmap or a single piece of work. Select it, run the script. Enter the number of columns and rows you want to split in and run.

  As Monika says, each separate object in your original will be duplicated for every room, so maybe things get a little slow with some complicated stuff.

  //DESCRIPTION:Make Puzzle
  // A Jongware Script, 6-Oct-2010
  
  rows = prompt ("Number of rows", 5);
  cols = prompt ("Number of columns", 5);
  
  cols = Number(cols);
  rows = Number(rows);
  
  sel = app.selection[0];
  
  posx = sel.geometricBounds[0];
  posy = sel.geometricBounds[3];
  
  width = (sel.geometricBounds[2]-sel.geometricBounds[0])/cols;
  height = (sel.geometricBounds[3]-sel.geometricBounds[1])/rows;
  
  for (y=0; y
  After running on a file HAVE to chance that I had laying around and, in order of appearance, provided with a drop shadow: