Scan of the computer does not happen with the MacBook Air 10.5.8 and C4480

Similar Questions

• Whenever I run Safari my fan comes at top speed and gets hot.  This does NOT happen with Firefox

  Since I upgraded to El Capitan, when I launch Safari, my fan is running hot, CPU goes into battery and use 100% drops quickly.  This does NOT happen with Firefox.

  Force Quit Safari and then restart Safari while holding down the SHIFT key. This will launch Safari without plugins or extensions. If works in Safari you have to remove all extensions you have installed and reinstall better one at a time until you find the offending Safari extension.

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

  Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

  Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

  When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

  Update HP says that my system is up to date.

  HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

  It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

  So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

  Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

  Thanks in advance 23. It is resolved! See to the end.

  I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

  Here is a series of screenshots when you run printing HP and doctor Scan:

  

  

  I click on "Scanning troubleshooting..."

  

  I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

  

  

  It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

  

  But if I go on and click on "Scan", bye bye:

  

  Everything is the same as the first time, as I remember.

  I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

  I launched a sfc/scannow:

  

  Before that, I changed the USB (a new one): no change.

  AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

  Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

• Windows 7 installer does not happen with the Blackberry software

  Running windows 7 ultimate 64-bit
  When you install Blackberry Desktop manager or device software or print to go I following after usual unpacking and choosing msg usa (eng) > can someone tell me what is happening this... Please help

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
  
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
  
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  What help is available from Blackberry.com?

  How to perform a clean reload of the BlackBerry Device Software for Windows
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=1&docTypeID=DT_SUPPORTISSUE_1_1

  Solution Center technology blackBerry
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.do

  General Support Forums
  http://supportforums.BlackBerry.com/rim/

• Computer does not start with the new video card

  Hello

  I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

  The video card is
  Sapphire ATI over-pants 2460

  I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

  It seems to me to have the latest version of the bios and windows 8

  What can I do else?

  Thank you very much

  Best,

  Korhan

  Hi JM,

  Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

  Your PC comes with one of the following built-in Intel graphics drivers:

  • Graphics Intel HD 4400 (GT2)

• Firefox on Windows. When I click on a link, Firefox hangs up with a rotating cursor. Problem goes away by moving the mouse. This does not happen with IE.

  Using Firefox 27.0, when I click on a link, a rotating cursor appears and continues to run. Move the cursor will solve the problem. I had this problem for several versions of Firefox, and I use automatic updates.

  Please update Firefox, troubleshoot Add - ons and if this does not help, then do a clean reinstall.

  Thank you!

• Google Calendar loading when changes Guard - does not happen with Chrome.

  When I find more information on the edit page of Google Calendar (and add or try to change, save or remove an entry, it, it says loading, but nothing happens. If I use Chrome, not Firefox, I have no problem. It is a relatively new occurane that it didn't happen earlier that Ive used Firefox since its inception.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• HP Envy 4500 will not scan to the MacBook Air Yosemite 10.10.3

  My printer connects wirelessly with my MacBook to print. It seems perfectly fine copy.

  However, the scan will be get no MacBook computer a friend and scan to it and refuses to scan at mine. I tried printing via system preferences > printer and scanner, tried to remove my printer and add it again to the impression that tried to download drivers for Yosemite to find that the error in the application downloaded impression told me that airprint was not working and the scan could not be completed. On my printer, my computer was never seen on screen as one scan to. How to solve this problem?

  Hi @LSarah,

  Welcome to the HP Forums!

  I noticed that you cannot scan with your printer HP Envy 4500 on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue scan for you!

  Please, try the procedure described in this guide, connection error shows then scanand let me know what happens!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• Arc keyboard does not work with Apple Macbook Pro 15 "with 10.6.7

  I myself come a set of Arc keyboard to go with my Macbook Pro. Unfortunately, he does not play well.

  Installed the intellitype pro 8 and restarted. I have no command button, even if I enabled the ability to move between the window and the alt key to be the same as the Mac keyboard.
  Rebooted a couple of times, but does not help. Reinstall the back always the same result. Best of all, no way to remove the installation.  Help please...
  Hello
   
  I suggest you to contact support Apple reclassification of this issue. Please my brother link below:
  http://www.Apple.com/support/
  See also below link using addidtional:
  http://www.Microsoft.com/hardware/mouseandkeyboard/support/default.mspx 

• Why my sound button does not work on my Macbook Air? New

  I stupidly clicked "Questioned solved" on my last thread, I'm sorry. Here's my problem:

  I have a late 2010 13 inch Macbook Air and when I press on my sound button on my keyboard it does not to do (the image is appearing). Also, when I watch a video with my unpredictable sound helmet goes out and hangs my computer for a few seconds. How can I fix?

  Carolyn Samit proposed that:

  "Disconnect the headset and then see if the prohibitive icon disappears when you press F12 icon."

  Also, open System Preferences > Sound , then select the output tab.

  Make sure you have good sale selected device and the mute box is not checked. »

  And I answered:

  "I did what you said and selected the correct output device but curiously he still doesn't seem to work. The icon disappeared when I pressed the F12 key. You have any other suggestions? Thank you very much. »

  

  Thanks if you can help.

  Hello...

  See if the NVRAM reset help > How to reset NVRAM on your Mac.

  In the future, it is easier for everyone if you stick to your original message

• Why my sound button does not work on my Macbook Air?

  I have a late 2010 13 inch Macbook Air and when I press on my sound button on my keyboard it does not to do (the image is appearing). Also, when I watch a video with my unpredictable sound helmet goes out and hangs my computer for a few seconds. How can I fix?

  Disconnect the headphones and then see if the prohibitive icon disappears when you press F12 icon.

  Also, open System Preferences > Sound , then select the output tab.

  Make sure you have good sale selected device and the mute box is not checked.