5550c ScanJet doesn't scan Windows 7

Similar Questions

• ScanJet 4890 cannot scan to PDF (windows vista)

  Recently, I replaced a 6 years Dell Latitude 810 runnung XP pro with a Dell E6520 running Windows 7 64-bit. I installed my Scanjet 4890 using the Windows Vista software and driver (using the compatibility check). I can scan documents to a printer, .jpg, .tif and .gif, but I can't scan to Adobe Acrobat (not an option, I can select). On the 810, I could sweep Acrobat. Can anyone offer any suggestions? Thank you.

  I hacked my way to a solution:

  1. place the document in scanjet, connect to the computer, turn on scanjet;

  2 launch the scanjet analysis, NO Office, with (document) at the far left button on the top of the cover of scanjet;

  3. answer questions on the "Scan button scan" window that pops up just:

  -Click on the option button "Document" and one of the 3 color choices;

  -in "Scan to:" dropdown list, choose 'Save to file';

  -in "file type:" drop-down list, choose one of the options PDF.

  -other options can be selected as required;

  4. click on the button "Scan" (lower left corner of the window);

  5 answer questions on the window "Scan to file Save Options button Scan" which has just popped up.

  6. click 'OK' (at the bottom of the window);

  7 analysis program will launch; Navigate as always;

  8. when all documents have been scanned, will find your document in the selected directory 5, above.

  I hope this helps!

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• My windows Vista, SP2 doesn't have windows fax and scan lilsted.

  Original title: windows fax and scan.

  My windows Vista, SP2 doesn't have windows fax and scan lilsted. I followed the suggestions of look in System 32. The required file IS NOT THERE! How dan I installed?  I need this program is not compatible Vista my my printer HP Compaq, so I can't use it to scan documents.   The named file was something with FS.exe (don't remember it all now, but he was not there.)  I see that others have found the same problem, with it is not there.

  Please notify.

  E-mail address is removed from the privacy *.

  I read somewhere since the announcement that this feature is not same inclued with Vista Home premium.

  That's OK, Windows Fax and Scan is included in the company and full editions: http://windows.microsoft.com/en-US/windows-vista/products/compare

  You will need to seek an alternative program to use.

• OfficeJet Pro 8500 a: ADF not recognized in the scanning window

  I had to reinstall my 8500 and the ADF show up as an option in the HP scan window. The charger works in copy mode. I reinstalled using the original disk shipped with the printer and have also tried to download the software and latest drivers.

  Scanner works fine using the glass, but I can't use the ADF. I uninstalled the printer and reinstalled several times.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  You can try this alternative software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Make sure that when you scan, the 'Source' is selected as 'Use if loaded document feeder' using the ADF.
  
  Let us know if it works.

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ

• Photosmart Premium C309g scan window display on computer...

  Anyone else having problems with the display SCAN window displayed incorrectly on the computer?  Here's an example of what I'm talking about:

  (And if I ENLARGE the window, it still looks the way it does here in the example).

  

  Photo #2:

  

  Photo #3:

  (Notice how the box 'pink' on the #1 photo and the "OrOr" in photo #2 has now something I can't read yet.)

  

  I guess that's NOT how this HP scan window is supposed to look like.  Does anyone else have this problem?  And someone has an idea on how to fix the problem?

  I submitted this problem to the HP HELP by email, but they were NO help at all.  In fact, here's the answer:

  "Hi Paulette;

  Thank you for your response. I'm happy to help you.

  I appreciate your efforts you have made to resolve the problem. I regret to note that the issue remains unresolved, even after the recommended steps are performed. I apologize for the inconvenience caused. »

  And that's all!  It was like ' we're sorry about your problem, but there is nothing we can do. "  I hope that some smart person in the 'Community' may include a solution for me.

  Thank you... 4t9rs (Paulette)

  Hey, PrintDoc.

  I had to let you know that I figured it partly thanks to your suggestion.  When you spoke of "resolution", it made me think.  The resolution is fine, but because of the resolution of 1600 x 900, I changed the DPI of 96 (100%) to 110 (115%) many years ago to make the fonts and icons a little bigger for my 'old' eyes... ha!  Once I changed the DPI to 96, the preview scan software was very good.  See below:

  

  I am able to see everything now.  So when I want to scan something, I just for the CIO back to 96.  It's kind of a pain, and you would think that a company like HP would do their adjustable software for his computer settings...  I can't believe that I spent 5 days with HP support, and they don't have any idea.

  In addition, with respect to the HP iPrint: I think what is confusing is that they have a list of printers 'compatible' for the use of the APP.  My printer is listed here; so I just assumed it would be all the functions, that is, scanning.  They probably should reword this so that it is not so confused.  But thanks for the smoothing which for me as well...

  I assume that this issue is resolved, but I don't know how to do it.  I would like to give you a few well CONGRATULATIONS.  I hope that I will be able to understand this.  Thanks again and good impression... Paulette

• an anti-virus scan windows came with the windows updates.how can I get rid of him?

  the anti virus scan window comes more update as well as the security already updates.i have avast.and when I was all he said he wants to sell me the already has product.i of antivirus software that say my computer is clean and safe.the windows antivirus told me that I have several infections.i know this isn't true.but I still can't install the security updates without having to install the windows antivirus.How do I remove the update?

  No, it came not with the security updates. These are malware that came in a different way. Scan your system with anti-malware/anti-spyware programs.

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• HP officejet pro l7780 all in a problem of scanning windows 7 64 bit

  First could not scan, replaced OS, OS reloaded, downloaded at hp, Hp solutions/scan came back. Now when I use the scan works but (always) arrives with 8.50 x 14 page scannee.00 even with a 8.50 x 11 printer page. The image size is 300 dpi.  When I had it before she would automatically the size paper. I can crop the 8 x 14 to 8 x 11, every time, but is difficult. Bought printer HP support plan, they compound, reloaded software, but the same thing. What is the adobe software, I installed? Any help will be appreciated.  Thanks dw

  Here is a thread about webscan and how you can do that as a work-around.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/WEBSCAN/TD-p/2529347

  The size of page and put in shape depend on what you select in the scan window and where you place paper on the flat. All of this information should be included in the first link I sent you.

  Have a wonderful day!

• Printer HP C309a Scan Windows 8.1

  How to scan with the HP C309a printer after updating to windows8.1?

  Computer and also directly from the printer

  Hello nlite.

  Welcome to the HP Forums! I hope you enjoy your experience here.

  I understand after upgrade to 8.1 Windows, you're wondering how to scan a document. I will do my best to help you! Did you install the full features of your new operating system software?

  How is the printer connected? USB or wireless?

  I recommend the continuation of this entire HP document on how Scan: Windows 8. Please let me know if you are able to scan a document. Although this document refers to another operating system, the steps will be the same.

  I will seek forward at the hearing on your part have good night!

• How to turn a fax in fax and scan windows 7

  How to turn a fax in fax and scan windows 7?

  See http://microsoft.suggestionbox.com/ for suggestions for improvements.

  The Microsoft Fax software was the same in Vista, so either they don't care to improve it, or too few have asked for it. No doubt, Microsoft assumes that everyone uses computer fax in Office documents so everything that expected to be the right way.

• HP Scanjet 6300c driver para Windows 7

  Hello

  I change Windows XP to Windows 7 and my scanner HP Scanjet 6300c did not have a driver to install.

  I hope to have a solution. Thank you for your help.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  From your post, it seems you want HP Scanjet 6300C drivers for Windows 7.

  If so, please refer to these links and check if this answer your question:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18414&locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=60104

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• HP Scanjet 4300C compatibility with Windows 7

  I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

  In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

  I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

  Hope you can help me.

  TNX

  Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

  Here are the directions:

  1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.
  
  2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
  Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.
  
  3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.
  
  4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

  5 restart your computer.

  6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.
  
  The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

  My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.

• While a single F2187 not scanning (Windows XP)

  This all-in-one has already worked on this computer and scanned documents. I solved the immediate problem by copying the document in question, rather than scanning it as expected. I sometimes alternative HP all in one installed on that computer. It is a USB connection on a single computer.

  I read the article for help . The scan diagnostics program does not list the all in one F2187 as being installed, it just displays USB.   The help section is re - install, but I already recently did the first time I read the article. I reinstalled using the internet, as I do not have the CD origianal at hand at the time. (So also no instructions for the moment)

  Other notes

  • Even if I get a message on the connection not the all-in-one works ok as a printer.
  • The scan does not work with HP solutions
  • The copy will work however the HP solution
  • No doubt the background material button is to copy, it doesn't work (high green flashing of the LED for a while - but there is no attempt at analysis.)
  • Scanning does not work from Windows XP (after trying to analyze in the paint - analysis option is greyed out)
    (I wonder if that indicates some kind of conflict)

  Any help or suggestions welcomed, but it may take me a few days to get around events and try to solve this problem.

  This is a long post, so I'll start with:

  In summary

  • something has changed and stopped the analytical work, I guess an update, or an update failed
  • an installation using a web download has failed repeatedly
  • HP diagnostics and troubleshooting does not seem much help
  • a re - install from an original cd has worked (in fact the CD might have been a different HP printer)
  • I see that my security software seems to interfere (Norton Internet Security) with the web update
  • Msinfo32 did highlight the problem

  Now for a longer answer

  I don't know why the scan has stopped working. I'm guessing that maybe an update was not suitable, or an update has failed. My system is Windows XP and using run-> msinfo32 I couldn't be a problem that the printer has been listed as a problem the appliance without driver.

  I tried the downloads of diagnosis HP that they did not help as much as a problem has been identified, but no printer has been identified as being installed, it just displays as a USB device without a name. RHE print download diagnostic work and give a load of green ticks. The printer did continue to work.

  The download of the web re - install failed. An attempt ended with a fatal error. Most of the attempts ended with screens showing but no option to do something. For example a progress bar still not 100% but an end 8/8 and gray buttons. The installation process with the Windows Task Manager to kill led to a download of an another interactive help file. I'm not sure that this was the case of good advice or offered that solve anything, but it was good at least to see happening.

  I tried to use one of the downloads of convenience store without being connected to the internet, but he refused to play that a connection is required.

  I noticed that my internet security was apparently interfering with the process.

  I am currently using Norton Internet Security. (NIS)

  I tried to start a re - install security installed and activated. I don't have anu warnings or advice to which I would need to react, but I noticed he was blocking actions. This continued even once installed software had its security option further down.

  I came to the conclusion that unless I uninstalled NIS a re - install online would not work.

  I dug an installation CD

  • I left off Internet - contributing to the security
  • I used the interface parameters of the user interface to reduce his minimum security setting NIS
    (he may still have blocked an online installation, but now he was offline, I have no blocking view reports
    -Note that I speak no explicit blocking reports
    (- I mean only blocking reports once apparent, history of security is displayed from NIS)
  • It worked, now the installation proceed as usual

  All in one printer works again including the scanning from the software, the hardware button

  He don't not at the moment seems to function as a scanner of Windows in the paint, it's something even HP help pages expect, he is listed as a workaround for problems of scanning.

  If you are interested in you answer

  • is NIS proving a known problem, and if so, that being done about this, is this a known issue on their forum?
  • you are able to get the web Updater runs on a XP with NIS system, if necessary
    • stuff like what I should have done?
    • you get block messages or not?
    • I am attaching a picture of HPZSHL01. EXE is not loved, but there is no option to trust him etc.
    • I am also attaching a picture display which of NIS user interface, should be relatively non reactive it is stopped, as well as can be done bar uninstall
    • Someone at - he better ideas except that it is a bad installation, is this a known problem and is the fact that the web install a known issue?