Scanner and Camera Wizard does not
I placed my Kodak digital camera memory card into the slot on my computer, and the only answer is that it runs on my printer scanner. How can I transfer my photos from my camera to my computer?
I placed my Kodak digital camera memory card into the slot on my computer, and the only answer is that it runs on my printer scanner. How can I transfer my photos from my camera to my computer?
================================================
Perhaps, you can manually start the scanner and Camera Wizard:
With your camera or scanner connected and open
on... try to go on... Start / run... and type or copy / paste
What follows:
wiaacmgr.exe
Now press on... Come in. This should launch the Scanner
and the camera Assistant.
The following Wizard can also be worth a try:
Also, you could manually download photos:
Something to try...
Connect the device to your PC via a USB cable and turn
on the camera... If open windows... Close them.
According to... to... Start / my computer... the camera can be
listed as a drive letter...
If_yes_right click on the drive letter and select... Explorer or
Open... This should display the directory of the memory card.
You can copy and paste or drag and drop the files from there to a
folder on your hard drive.
(The same steps work if you have a media player...
When you go to... Start / desktop media slots...
Drive should be listed under... "Removable disk" with a drive
letter.)
Tags: Windows
Similar Questions
-
My scanner and Camera Wizard is not poping up to transfer photos from my camera
My Wizard appears after using the trial version of AVG PC Tuner is no longer to transfer pictures at my cameras are listening on. Used to.
the wizard has no other camera listed... does not work try to list them using the disc that came with them... I have a Sony and a new Panasonic... dunno why no brand is not listed.
Anyone know how to get the screen to make it appear again?
I tried the automatic setting of Microsoft... has not helped... Impossible to find something wrong
I have always used the auto pop up the camera wizard to transfer my photos from my camera. I ran AVG PC Tuner trial a few days ago. Now... the scanner and Camera Wizard does appear more... ugh. I tried to add the two cameras to the wizard, but because Sony and Panasonic is not listed, I can add them (he claims he can't find good info on the disk is)
Anyone know a fix?
do a system restore to an earlier date of AVG from the trial.
-
How to re install microsoft scanner and Camera Wizard
I accidentally deleted Microsoft scanner and camera wizard how to re install?
The executable for the scanner and Camera Wizard is:
wiaacmgr.exeWith the camera connected and turned on... go... Start / run... type or
copy/paste the following and press on... Enter... must start the wizard:wiaacmgr.exe
or...
C:\Windows\System32\wiaacmgr.exeYou can also go to... Start / Control Panel / scanners and cameras.
Add a device of imagery... and attempt to add the camera.Also... the following article is maybe worth a visit:
(FWIW... it's always a good idea to create a system)
Restore point before editing the registry)Microsoft camera and Assistant of Scanner does not
http://www.veiled-Chameleon.com/weblog/archives/000231.htmlGood luck...
-
is - it version XP from Microsoft scanner and Camera Wizard work on Win 7?
original title: the version XP from Microsoft scanner and Camera Wizard work on Win 7? It is much more useful to manage his photos. The version of Win 7 does not even recognize the camera.
I don't know what else to say. I have an old XP machine, so I used that. Child's play for what I wanted to do.
Thank you for volunteering J, for this quick reply.
My question gets pictures from a camera to a PC, my problem is that the XP version is very useful, and the version of Win 7 is not.
Where the question: can I use the XP version on Windows 7?
Concerning
John
=====================================
You are welcome.Sorry for this misunderstanding.
You have said that your camera is not recognized then
I assumed that you were unable to download your photos...Anyway... as far as I know... the XP Scanner and camera
Wizard cannot be used on Windows 7.The info can be useful to experiment.
Windows XP scanner and Camera Wizard is:
wiaacmgr.exe
On a Windows XP system, the path to the file is:
C:\Windows\System32\wiaacmgr.exe
There is also a copy of the file located in the:
C:\WINDOWS\system32\dllcache\wiaacmgr.exe
I wonder what would happen (if there is one) if the
wiaacmgr.exe file has been copied from the XP system
and transferred to the Win 7 system?If you decide to experiment with the wiaacmgr.exe file...
Proceed at your own risk *.
On a XP system if a scanner or camera is connected
and turned on... you can left-click the wiaacmgr.exe
file (even if it is copied on the desktop) and it allows to detect
the device.Will it work if copied on the Windows 7 Desktop? I have no idea...
-
Microsoft scanner and Camera Wizard
Whenever I have download photos from my camera and the "scanner and Camera Wizard" appears, I select a destination folder, but I still get a previous folder that appears on the desktop that I created a year ago. The record never has anything in it. It appears just when I download. I reinstalled the Canon software and that did not work. Does anyone have any ideas?
Thanx
Mark
Whenever I have download photos from my camera and the "scanner and Camera Wizard" appears, I select a destination folder, but I still get a previous folder that appears on the desktop that I created a year ago. The record never has anything in it. It appears just when I download. I reinstalled the Canon software and that did not work. Does anyone have any ideas?
Thanx
Mark
====================================
Looks like you need to adjust your AutoPlay settings.Something to try...
Reach... My computer...
Right-click the icon for the drive in
issue. For example... a card
drive may appear as:
Removable (e :)) drive
(if you have a multicard reader
You can have multiple... E, F, G, etc.)Choose... Properties / AutoPlay tab.
Open the drop of Content Type
and choose the photos.Tick... Select an action to perform...
Left click on the button "Restore default settings" / apply / OK.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Launch Windows scanner and Camera Wizard
How can I manually start the scanner and Camera Wizard? It runs automatically when I plug in my camera, but if I want to copy photos in different directories, I must perform these tasks as a group. As soon as I made a group, the wizard stops and the only way I know to restart is to unplug, then reconnect the device. Someone knows a way to start the Wizard manually?
Thank you
How can I manually start the scanner and Camera Wizard? It runs automatically when I plug in my camera, but if I want to copy photos in different directories, I must perform these tasks as a group. As soon as I made a group, the wizard stops and the only way I know to restart is to unplug, then reconnect the device. Someone knows a way to start the Wizard manually?
Thank you
=======================================
The executable for the scanner and Camera Wizard is:
wiaacmgr.exeWith the camera connected... go... Start / run... type or copy/paste
the following text and press on... Enter... must start the wizard:wiaacmgr.exe
or...
C:\Windows\System32\wiaacmgr.exeVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Scanner and Camera Wizard no longer works
The automatic transfer to "Scanner and Camera Wizard" function has stopped working on one of my two digital cameras.
Hello
1. What is the operating system installed on your computer?
2. what exactly is the problem you are having?
3. don't you make changes to the computer before the show?
4. What is the number of brand and model of the digital camera?
5. you get any error message?
6. you try to install the scanner?Please provide us with more information on this issue to help you best.
Click on the link below.
-
How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences. I have widows xp pro
Hi Plumbbgp,
1. what brand & model of the scanner?
2. the scanner was working fine before?
3. don't you make changes on your computer before this problem?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
the scanner and Camera Wizard box is empty
The wizard opens when I put my SD card reader into the USB slot, but there is no choice in the selection of the action box. How can I fix it?
Hello oldmellow,
1. are you referring to the AutoPlay dialog box that appears when you plug in the USB key?
2. have you checked if the card reader is detected in Windows Explorer?
3 was this work very well at all times before?
If the SD card is not detected automatically, you should check if it appears in Windows Explorer.
Open my computer and check if the scanner and camera appears here.
a. to open the scanners and cameras, click Start, click Control Panel, click Printers and other devices and then click Scanners and cameras.
If your camera or scanner is not listed in the scanner and Camera Installation Wizard, try to install it using Device Manager. Check if the device is detected in Device Manager. You can see the bottom of the article for more information on this:
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
original title:wiaacmgr.exe
I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera. My problem is almost the opposite! Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use. If I close the window... Not much, but it's a nuisance. I would be happy if she has proposed to launch work stations. I then click on the box "Make this every time" and will never see the window. Otherwise, I'd be happy to remove the program completely. Can someone tell me how to achieve one of these? S ' Please!
JimHello
I suggest you to return the item and check if it helps:
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
See also:
Change default programs using Set Program Access and computer defaults
-
Prefer the scanner and Camera Wizard in Windows XP on Vista
I searched the web on this and found that there are a lot many people like me who like the scanner and Windows XP Camera Wizard to import pictures better than vista. However I have not yet found a solution on the web for this. I have 4 boys and like to put their photos in individual folders marked after each of them. I can't do this in vista, and I can't do that in Windows live photo gallery. The scanner and made XP Camera Wizard is very easy to do. Does anyone know of a solution to this or a 3rd party app that does the same thing?
sssuperd,
If you can navigate to the photos inside the unit through 'My Computer' then you can select the 50 photos that you need to highlight the images then 'Right click' on a highlighted area and select "cut"(en sélectionnant"Couper"les fichiers que vous avez sélectionnés seront effacées de l'appareil photo dès qu'ils sont fait copier vers la destination que vous avez sélectionné). "» You can now open the folder you want the images and right click and select "Paste". I will list the order the steps below.
Step 1. Connect the camera to the computer.
Step 2. Open "Computer".
Step 3. Double-click on the camera.
Step 4. Go to the images you want to transfer.
Step 5. Select or highlight the photos you want to transfer.
Step 6. Right-click on one of the pictures that was selected and select "cut"(si vous voulez ces images à supprimer de la caméra après transfert) or "Copy" (if you don't want these photos to remove from the camera after transfer). "."
Step 7. Open the folder that you want to make these files transferred to and right-click on an open area and select 'paste '.
Please let us know if you will have more questions.
Thank you
Carlos
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Camera Wizard does not open to download photos (windows xp)
is no longer the box pop up opens when I try to download pictures from my camera or use a card reader. Can not down load pictures, don't know where they're going to... talk to the camera to my computer.
I'm thrilled to say that the problem seems to be fixed. According to my follow-up comment last night... the reason why your first proposal (888022) did not fix the problem is that "I had not restarted my computer' after I made the (first) fix you suggested. After I restarted my computer and my camera to the usb port connect the scanner/camera wizard appears and I now have my photos. I want to thank you for your help and hope that others can be helped also.
-
Preferences in Bridge and Camera RAW does not
I'll put up a new Macbook Pro, end 2013 15 ", 10.9.2
CS6 Production Premium, also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up-to-date.
Bridge and Camera RAW preferences do not work properly. Bridge prefs-related bridge display, for example theme color, text under tiles, places preferred, etc... all work fine. Pref. Bridge opens and closes correctly without error. "Double click on edits Camera RAW settings in Bridge" does not. Photoshop starts to open Camera RAW regardless of whether or not this box is checked. The camera RAW preferences are not open. By selecting "Camera RAW préférences" of the bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
I tried a new user with the same results.
What's up with that? Anyone else seeing this? Solution?
-David
Fixed it with this work around
-
How to enlarge the photos that I am scanning in the scanner and Camera Wizard &?
I have Windows XP
You can increase the dimensions in pixels of your scans by
changing the following setting."On the screen"Choose scanning preferences"left click".
the "Custom settings" buttonOn the 'Advanced properties' screen... increase the DPI
the default value of 150 to 300 or more.If you get an unwanted white border on your scans...
automatic detection of the art could be at fault. When on the ' choose
Preferences screen scan... left click on the button "Preview".
and you can see what will include the scan.If the bounding box does not adjust automatically to the edge of the
photo... you can manually drag the edges. Simply place your
pointer over the edge of the bounding box and what
you see the double arrow... click left/slide to the right
position. You can also use this method to scan only one
part of a photo... the analysis only includes content
of the frame.FWIW... There are a lot of analysis of information on the following Web site:
A few scanning tips
http://www.Scantips.com/ -
There are about 1500 photos in the film and about 1000 other photos. It worked when the film was smaller.
I'm not sure if you are saying that the wizard will not start
or the wizard launches, but will not download pictures.Might be worth trying to manually launch the Scanner and
Camera Assistant:The executable for the scanner and Camera Wizard is:
wiaacmgr.exeIf you connect your camera via USB, turn it on and and
Reach... Start / run... type the following and press on... Come in...
To start the wizard:C:\Windows\System32\wiaacmgr.exe
Also... with the camera connected and turned on... If you
Reach... Start / my computer... is the recognized camera
with the letter t? If_Yes_you can copy and paste photos
from there to a folder on your hard drive.
Maybe you are looking for
-
Portege M300 Fn + F5 key does not
Hello I'm running a M300 on Advanced Port Replicator II. Recently, the Fn F5 (laptop, keyboard) and assigned right Ctrl/Alt/F5 key combos have ceased to display the selection sequence of the computer/laptop screen laptop + external/External. All that
-
Satellite A210 - 1C0 - stops down automatically
Hi, Satellite A210 - 1 c 0 stops on its own. He did it after a short period or after 2 days,Sometimes it stops down and sometimes not. Nigel
-
When I type express for high priority updates, I get Error 0x80072EFD. How can I fix it. ??
-
Hi all: I hope someone knows the answer to this. I use Win XP Prof and IE 8. I installed the trial version of combine PDF a year ago but I have not used for some time. Today, when I went clicked on the shortcut on the desktop, it has opened a "Save P
-
WRT54GP2 cascade successfully, but VOIP does not work via the LAN port
Hello I searched a lot for a solution to my problem, but have found that it is really above my level of understanding. My apologies if this question has been answered before – if she, I can not find or understand. I have an existing wired network tha