Scanner HP and Vista

Similar Questions

• Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

  When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
  I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

  I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

  I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

  Hello

  We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
  So in my opinion the next drivers for the next series should follow in the near future

  I don t see it differently as to wait

  Of course, you can test different drivers from different series as Sat P100.
  Many laptop models use the same devices and therefore different unique pilots could be compatible

• How do we install Perfection 1200U scanner under Windows Vista?

  How install Perfection 1200U scanner?

  How can I use the scanner Perfection 1200 U on my computer with vista.

  Hello

  Software scanner Epson Perfection 1200U is not compatible with Windows vista, take a look at the link:

  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_SessionID=@@@1358682075.1337859437@@@&BV_EngineID=ccfiadfgklhfdijcfngcfkmdhjidfmh.0&cookies=no&infoType=FAQ&oid=14568&prodoid=9921&foid=133890

  I would like you to install the software of the scanner Epson Perfection 1200U in compatibility mode and check if the problem occurs. Follow the steps in the link:

  a. make a right click the driver digital camera configuration file.

  b. click Properties.

  c. click on the compatibility tab.

  d. check run this program in compatibility mode and select Windows XP.

  e. click apply.

  f. click Ok.

  g. after above market double click Epson Perfection 1200U scanner file and try to install it.

  For your reference, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  You can also have a look at the link:

  http://support.Microsoft.com/kb/927386

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14568&infoType=overview

• Cannot print through USB on Windows 8 router, but can through windows 7 and Vista

  Problem:

  I have a printer that works for both computers windows 7 and vista.  I have two computers windows 8 that do not work.
  Material:
  laptop Toshiba P50 brand new.
  Router Asus RT - N16 rooted with the TomatoUSB firmware.
  Printer/scanner color Samsung CLX-3180.
  Symptoms:
  I can get the printer to operate if connected directly via USB.  The new Samsung universal of the generic drivers work.
  Even the driver connected via TCP/IP causes the printer to beep and the power wheels to run but nothing comes out.  It looks like windows and the printer think print things.
  What I've tried so far:
  Uninstalled all printer drivers and ports.  Then reinstalled with fresh downloaded drivers.  I had to erase the registry because pilots and port were considered to be in use.
  I have disabled the firewall without result.

  I fixed it finally I think.

  Here's what I did.
  -Deleted all drivers in the system.  (1) remove the 2 devices) remove the driver through "(propriétés dele de serveur d'impression 3) delete all created ports through"the print server properties""
  -Download the new drivers. type 64-bit
  -printer installed using Samsung universal driver 2 and player USB connection as required by the manufacture.
  -installed the TCP/IP port using the TomatoUSB facility and former driver of windows 7.  (wrong system to not check to see if the printer is online)  The pilot was CLX-3180
  -Changed the driver properties Advanced printer to "Sansung Universal Driver 2" tab
  -Change of printer model for Samsung CLX-3180 in the printer - Options tab of the device properties.
  -L' printer select clicked the button when changing the port.  Don't know what it does.

• Need advice on the recovery CD and Vista upgrade on Satellite M100-222

  I want to share my problem to get some tips. I got a laptop Satellite M100-222 Windows XP and Vista capable, then I got an upgrade to Vista and it works with few problems that do not recognize some programs.

  That's why I have some needs and need your help and support and they are as follows:
  1 - is possible to reformat using the upgrade of Vista, or need to reformat with XP first and then update with Vista.
  2 - I tried several times to start the CD, DVD (product recovery) to reformat the laptop. However it is said (operating system not found).

  Kindly enlighten me.
  Concerning

  With regard to the point;

  (* 1) * If you ONLY upgrade Vista CD, then it s necessary to start the first restore XP CD, and then upgrade to Vista.

  (* 2) * usually start from the CD/DVD recovery must format the HARD drive and need to install the new image of Toshiba. Please check if you have started since the right recovery CD! Don't mix it with the Express Media Player recovery CD!

• Compatibility of Norton Internet Security and Vista Home Premium

  I have a new laptop with pre-installed A200 Vista and Norton Internet Security.
  I can't use the send/receive button to send Windows messages.
  I spent the time considerble in the forum MS to fix this problem without success. I am told that Norton is not compatible with Vista - even if Toshiba pakage this sooftware together.
  I deleted Norton and in fact the Windows Mail Send7Receive button start working. BUT then after about an hour it has stopped working again! I have re-installed Norton but the problem is still there! I can send E-mail of Mail when I exit and restart the station.

  Can help for this problem - can it be to the ISP? I use port 587 SSL

  Post edited by: tuition

  Hello

  I studied a little more on Norton and Vista compatibility issues and the Symantec Norton Internet Security is certainly compatible with Vista!

  Also, I found a document very useful Toshiba on this subject:
  Check this box:

  Windows Mail won't send or receive emails
  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  It seems that the update of the Software Desktop SMS Installer version will help to address this problem.

• I would like to install XP and Vista on a Tecra A9

  Hello

  I want to install XP with Vista - have created a separate disk/volume & must go into the BIOS to cd XP will boot from there it starts & begins to implement loading files & then comes up with the message that it does not recognize the hard drives.

  Someone can advise please & is there a reason THAT XP & Vista should not be set on this laptop (Tecra A9).

  Best regards PM

  Hello

  Please do not hesitate to use the two OS on this notebook ;)

  I put t see difficulty do. You must first install the XP on the laptop.
  Then create a second partition on the HARD drive. On this score, you will be able to install Vista.

  The Vista Setup program will create a boot manager so that you can choose between the two OS (XP and Vista) at startup.

  Just try this. If something does not work please post again ;)

  Greetings

• LaserJet 4 L and Vista do not play well together

  I have my LaserJet 4 L hooked up to a Vista desktop via a parallel to USB adapter, using a USB port.  It works very well for a while.  Then, it will not work.  When it fails, the printer info box shows the file in mode 'impression', but it never reaches the printer. And when I try to cancel printing, it can take five minutes to remove.  If I remove and reinstall the printer, it works for awhile - and then the same thing happens. Sometimes rebooting makes the printer works for a while, but not always.  I use Vista 4 L driver. (HP is not posting a 4L Vista driver on their site - they just will tell you to use the one in Vista.) I manually installed the printer and also leave Vista recognize and install it. I get the same results (bad) anyway.

  I begin to suspect the parallel to USB adapter.  (Believe it or not, its documentation is partly in Chinese, and I bought in the USA).  At this point, I could buy another - or I guess I could buy a card for my computer's parallel port.

  (I know this is an old printer, but it worked flawlessly for 15 years, and I don't like junk food it.)

  Any suggestions to solve this?

  Thank you

  Alan

  I don't got no answer on that.  But I managed to solve this problem.  So, just in case, someone else has this problem:

  It was indeed my parallel to USB adapter.  I bought a new parallel cable USB (a cables unlimited, Micro Center brand). The package called for it is Vista compatible and that it supported a long list of old printers HP, Canon, Epson, Lexmark, Panasonic.  It works perfectly. First of all, I just connected the cable to the computer. Vista recognized and loaded a driver.  Then I plugged the other end into the printer and Vista has recognized the printer and loaded the driver for this.

  Be aware that most of the parallel to USB adapters don't pretend to be Vista compatible - and probably are not.

  Alan

• Satellite A300-1IA - FN CrashFree does not pop up on XP and Vista

  I have an A300-1ia, and since a week, most of the function FN keys no longer works.

  The utility has no popup more under XP and Vista.

  I have a multiboot system and the problem did apear a week ago.

  I think it has to do with some windows update.

  Hello

  If you are using Win XP then I recommend reinstalling the common Module.
  If you are using Vista reinstall the VAP (added Vista package).

  Welcome them

• 4630 won't recognize scanner - printer and utility connect properly

  4630 won't recognize scanner - printer and utility connect correctly.

  Downloaded the software for Mac OS 10.10 altest, but he still does not see the scanner.

  Help, please!

  I uninstalled and reinstalled and it works again.

  Thank you

• XP and Vista games are played on Windows 7

  Original title: cd

  Is windows7 compatiable with windows, xp, and vista games

  Virtually all of the new and old. Find the name of the game here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx for a definitive answer.

  teengeek.freehostingcloud.com

• I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  Hi, CPC,.

  Welcome to the Microsoft Answers Community!
   
  You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
   
  You log in to vista, you may not use any of the XP application and vice versa.
   
   
  Thank you, and in what concerns:
  Azeez Nadeem
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you

• Shockwave and vista

  I recently bought a laptop with vista pre installed microsoft and to play games that I need to install adobe shockwave player what I did only to find out that vista has not started it and now I want to know how microsoft canjustify the fact that some of their games using shockwave player when it is not supported by windows vista and when you try to contact their Helpline they will charge you 46 books to give you help is on top of the price of the laptop and vista license fee, that I discovered that adobe Director and shockwave 11.5 can be compatible and you can download a trial of this version from the adobe site this that I strongly suggest people and spare yourself the 46 pounds me im going back to xp when I figure out how on the laptop as so far vista has blocked all attempts

  Cut too, Hi

  Thanks for posting.

  Flash is considered to be a product of the third-party software and is supported by the manufacturer.
  However, if you want to display the error message or explain what happens when you try to use it, we usually try some troubleshooting here operations.

  I recommend that you check to make sure that you have the latest drivers for your video card by visiting the manufacturer's Web site.
  I also suggest you temporarily disable your anti-virus software during the installation of the Flash software.

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why some games and other programs need to be "run as Administrator" mode in 7RC which worked fine in normal mode on 7 beta and vista?

  Why some games and other programs must be run in Admin mode in 7RC which worked fine in normal mode on 7 beta and vista?

  An example of this is the game Guild Wars (www.guildwars.com). I had problems with this with random programs.

  cbello57,
  Run as administrator may be required for some games and programs because they have a permission structure different in Vista in Windows 7 (Windows 7 and Vista are different in how to manage certain permissions).

  I suggest test you installation of the game in the program by clicking on the Setup file by clicking on "Run as administrator".

  This will sometimes solve this kind of situation because it installed the program in a State of high permission.

  This output from test and let us know your results Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I find driver v4.01 VTC USB drivers for XP and Vista OS. EXE, so I can download it to my computer so it recognizes a well-read reader

  I have some difficulty for my computer to recognize my drive letters and Googling this problem someone said that it downloaded the drivers USB Driver VTC v4.01 for XP and Vista OS installer. EXE, but I can not find this driver anywhere.

  I have the reader of letters connected with a USB to my pc, but it does not recognize.

  In any case, you can offer a help would be great.

  Thank you

  Hi WB,.

  You use reader Iconix applied?

  If so, check with them for the pilot.

  http://iconixbrand.com/sharperimage_history.html