Scanning an image

Similar Questions

• scan multiple images again and I don't want that he

  Hello

  I have a HP Photosmart 7525.   I use the Mac OS X 10.6.8 version.  I'm analyzing my grandmother's recipes.  On some of the TI keep break them into multiple images.  How can I disable this feature.  I'm just a complete picture of each recipe when I scan one at a time.

  Thank you

  Sean

  Hi Sean,.

  Please follow the steps below to resolve the problem described:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none or A4.
  7. click OK and try to scan the image.

  Kind regards
  Shlomi

• No list of LCD on all-in-one printer, HP Photosmart C5280 to scan an image in my computer.

  When I turn on printer to scan an image to the computer there is no list of LCD.  The only way I get the list is if I turned off the printer and the computer.  Then reboot again.  How can I get the list of the rear LCD screen on the printer.  The operating system is Windows XP Professional.  I have not installed new software or new hardware.

  Sorry for the confusion. Power cycle is turning just off, wait 30 seconds and turn it on. Not uplugging, this is considered a hard reset. Just off tension.

• Photo Gallery/Windows Vista to scan an image on my Canon printer/scanner and it produces only a small part of the original.

  original title: Trouble scanning an image.

  I use Vista/Windows Photo Gallery to scan a picture on my Canon printer/scanner and it produces only a small part of the original. What should I do to make it load to 100% of the original?

  Sometimes, there is not enough contrast of a photo
  and a scanner may have problems with the edge detection.

  On the preview screen, you should be able to see the
  part of the picture will be scanned.

  This article may be useful:

  Windows Vista - Windows Photo Gallery - scan a picture
  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-picture

• How to stop Windows 7 opening 'imported photos and videos' after each scan an image?

  I'm scanning multiple images and after EACH scan, Win7 opens a new window "Imported pictures and videos", despite the window being open 20 times already...
  
  In the import dialog box, deselection 'Open Windows Explorer after import' has no effect.  After each import, a Windows Explorer window appears showing me that the directory of the file has been imported to (i.e. "imported photos and videos").  Worse still, this happens even if another this window is already open - so if (for example), I scan 10 pictures, I have 10 windows explore open all showing this same directory (unless I close them I will).

  It's boring, clutters the taskbar and takes expire have to close each window - how are we going to stop Win 7 "Imported photos and videos" opening after each scan?

  Hello Carl,

  You attempted to change the option to "Open the Windows Explorer after import" while connected as another user on the computer to see if the problem persists?
  Also, have you tried to scan using a different computer to see if we can isolate the problem to a machine?
  If you have checked these things and the behavior has not changed, I suggest to leave feedback for the Windows team at this link as an option behaves as expected:
  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

• using a hp 6500 - how to scan several image documents and keep them in a single image file

  using a hp 6500 - how to scan several image documents and keep them in a single image file instead of hafving to create a separate file for each page?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-6500-scan-multiple-pages-into-one-PDF-file/TD-p/252650

  This previous thread should help you.

• My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

  My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

  Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

  Ok. So, the answer is certainly: Yes, it is possible.

  The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

  Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

  When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

• working with the scanned tiff image

  With the help of PS CS6 on iMac (24 inch, early 2008) 3.06 GHz Intel Core 2 Duo, 4 GB 800 MHz DDR2 SDRAM, iMac, NVIDIA GeForce 8800 GS 512 MB: when you try to open a scanned tiff image, it opens sometimes directly in PS, sometimes open in Camera Raw. All works well when CR opens, but that happens only occasionally. When you open directly in PS, everything works fine for one or two images, then the following images opens not entirely - perhaps visible to 75%, the rest blank of canvas. Whenever I left the PS it can work a couple of times, and then to cut the image again. What the Hay? Is there a way to open Camera Raw directly?

  «You can select the file in the open dialog box and set "Format" "to Camera Raw".»

• Impossible to scan an image larger and small photo on 6510 all-in-one

  Cannot parse an image larger and small photo on HP 6510. Product #CQ761A, model # B211a.

  Using Windows 7 64 bit PC. Resulting photo in my pictures is a small photo of bitty. Tried to 600 dpi and 1200 dpi also. Get always small scanned image. Any suggestions?

  Bought a memory card that works with my printer.

  Am ready to copy & paste as you suggested, but couldn't find any icon on my PC that will give me a place where I can get there.

  How can I find that?

• Scanning multiple images at the same time and you want to save everything in a single file, not separately

  I have the HP Envy 4500 model.  I also have a Windows 7 OS, HP.  My problem is that I put for example five images on the glass for scanning and I find myself with five different jpg files when I want all five images on a SINGLE scanned jpg file.  How to achieve this?  Thank you!

  Hello

  Please use the scanner software on your computer.

  Kind regards.

• Windows camera and Assistant of Scanner for scanning and image for Windows 7 download

  I tried to scan on my new computer with Windows 7, the old XP version had "Microsoft caméra" and Assistant scanner to scan and save images and documents, is it possible to get this program for my new computer?

  Hello

  I suggest you to see link below and check if it helps.

  Working with the scanner and Camera Installation Wizard: http://windows.microsoft.com/en-US/windows7/Working-with-the-Scanner-and-Camera-Installation-Wizard

  Hope this information is useful.

• Fax and scanning multiple image Windows

  When I try to scan anything under Fax & Scan, the scanner wants to create huge, several images. In other words, an 8.5 x 11 page will scan 4 or 5 times with enormous fonts, creating pages that many. I can't find anything to change my default settings. Help? Thank you.

  It could be the DPI setting. Tried to turn down.

• Photosmart Premium C309a Win 7 scanned unsaved images

  The function photo scan Solutions Center will allow not to store an image where several photos are scanned. Have reinstalled the software and tried to apply the fixes recommended in this thread; still have the problem. If 5 photos are scanned on the flat and covverted of individual images, only the first image is saved, it seems that all images are saved based on the screen the messages/status windows, but only the first frame is in the target directory. No error message. Any help will be appreciated; I have hundreds of photos to scan!

  Uninstalled all the HP software and drivers through Win 7 Control Panel.

  Installed the downloaded software v.14 HP and the drivers and the printer c309a together save.

  Tried to scan several photos off the Board and save as .tif files, but only the first image has been saved in the destination directory.

  Changed the recorded in .jpg format and pictures appeared in the destination directory. Go figure?

  Solution Center apparently dislikes the .tif files.

• Scanning multiple images in 11 elements

  How can I scan several photos on my Photosmart HP 7520 scanner in Photoshop elements 11 without analyzing one by one.  I want to place several photos on the scanner and have the software select the multiple images and place them in separate for processing files.  Thanks for your suggestions.

  Ken Goff

  Scan from in the editor, rather than the organiser. Then, after scanning multiple photos, select Image > divide scanned Photos.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Scanned and image pdf Brown and white: unreadable (Acro 8 Pro)

  I use Windows XP and Adobe Acrobat 8 professional.  Recently, every time I opened a pdf file that is scanned, or is an image converted, all I get is a white brunette page.  I can't view or edit them at all.  This happened a few months now.  I have no problem with pdf files that are not converted from image formats. I've included a CAP, punctured the issue.

  Works fine for me, even to AA5. You must go to the properties (under the Edit menu) and enable the large graphic display.