Scans to scan in blank page

Similar Questions

• The HP Officejet 4620 automatic document feeder continues to scan blank pages

  All-in-one HP Officejet 4620e

  Windows 7 64 bit

  I recently bought this printer and it worked pretty well, apart from a few network difficulties which are known as being a question about these cards.

  Today, however, we have noticed that when you use the ADF on top, the device will scan the page or pages inserted, then continue to scan blank pages until the job is canceled. This has happened for copy, scan and fax. For copies and scans, the work always is, although a copy job will lose a bit of paper. A fax can not pass because he thinks there is a countless number of pages to scan in. Looks like that eye scanning crashes when you try to finish the job. The use of glass flat works without problem.

  I updated the firmware of the device through the web utility and I downloaded the most recent drivers. I have not yet called HP, but I saw nothing on these boards to suggest that it happened to someone else.

  The hard reset did not work.

  I tried to do a factory reset on the printer itself and that seems to fix the problem. Instead of chasing the copy white pages permanently, he ran a blank page after the copy and completed the work.

  Then I reconnected to my network and tried again. This time, I didn't get no blank page, just the requested copy.

  Then, I reconfigured WebServices and tested the connection with eprint and the configuration of the fax that was normal. I checked that the update of the current product. I tested the ADF once more after the reconfiguration everything again and like a scan, I got 8 pages... the document, then 6. Just for fun, I tried again and got the document and a blank page.

  It seems that the laser eye is suspended after the digitization of the document. It's better now that it was because it ends in fact it does. I can always just use the dish for unique pages and save the ADF for multiple. It is probably the best way to go forward from here.

  Thanks for the help.

• scanning an entire page?

  Hello.

  How can I get my HP 3070 scanner to scan a whole page? I use a Mac laptop. It scans very well, but as the size of a credit card - not the entire page - just a corner of it. I tried to find something in the settings to solve this problem, but nothing seems to work.

  Thank you

  Yes, the steps are the same, simply skip the installation of the patch and follow the following steps.

• HP ENVY 120: scanning of multiple pages in one same task

  I was able to scan multiple pages into a single PDF. Since last week when I replaced the ink cartridges (both HP) I can't do more. The ASNA creates two separate files: namesake, a _1 and the other _2. Two separate PDF files. How can I do the scan keep two pages (3 or 4 and so on) in a single PDF file?

  I did not change anything else than cartridges.

  Welcome @Tche2015,

  Thank you for your participation in the forums! I see that you encounter problems, scanning of multiple documents in a file on Mac. I'd love to help you.

  I have provided a few steps to check the settings of the scan to PDF.

  Once the analysis is complete, click on send in the lower right corner.

  Click the folder from the list.

  Then down to the next window, click on the menu down next to Format and select PDF.

  (if you want to save multiple files in a folder, uncheck Save all items in a single file next to content.

  Select the location where you want to save the file.

  And then click Save.

  

  If you're still having problems, fix permissions of the drive on the Mac:

  • Repair disk permissions:

    • Click on your desktop so that it is written next to the Apple Finder icon, and then click Go (you'll see it next to the Finder after file, edit and view).

    • In the context of Go, click Applications.

    • In Applications, select utilities.

    • In the Utilities folder, you will see the disk utility, double-click on this icon to open the disc utilities.

    • Click on your hard drive, and then click first aid. Click Run to allow it to run.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• I'm unable to scan a multi-page document. HP Deskjet 3052 has J611

  I'm unable to scan a multi-page document. I tried everything, re-installed the driver and studied the help settings and there is nothing. Once I scan a page it allows me only to save it and not to add another page to the document. I can't send a pdf CV by attaching two separate pages. I have scanned multiple pages documents other HP scanner and never stumbled on this dilemma. I am running Windows vista and the printer is the printer HP Deskjet 3052 a J611. Help, please.

  Hello

  Don't forget to run the scan of the computer to scan several pages.

  Open the HP software and click on scan a Document or Photo.

  Select the PDF shortcut and if ensure that the dialog box overview checked to be disaplayed.

  Make sure that the resolution set at 300 DPI or lower (any higher resolution does not support multiple pages) and click Scan.

  Use the button to add additional pages until you are finished, and then click Save.

  Shlomi

• HP5643: HP 5643 All in One - how scan you multiple pages

  I can scan my wireless printer unique pages, but for the life of me I can't understand how to scan multiple pages.   I read the other posts on other threads on by clicking on the sign (+) sign to the left of the display after scanning one page, but I don't have a (+) sign to click on.  Someone has this model of printer, that can help me?    Thanks in advance for your help.

  In addition, any way to speed up the scanning process?     My old printer could easily scan a 10 page document in time, that it takes to scan a single page.

  @TXXpress

  Assuming for now your printer to provide the "Document Scan" and the little "+" feature, you don't have to have the "Preview Scan" selected.

  See:

  Scan_Multiple_Documents-combined

  If all else fails, you can try to use a different program to scan multiple pages into a single document.

  Options of the digitization program

  I don't have the same printer model - I can't comment properly on scan "slow".

  • In general, the printers to "do a bit of everything" cheaper still not 'all' as well as more expensive printers, a full service.

  Other things that could cause a "slower than ideal: sweep

  • Wireless, if they are available and used to connect the printer, may cause slow response - which can be attributed to anything between a bad router and a bad signal for a slow wireless card in the printer or the computer.  The answer "slower than snail" may be caused by the network is too busy with other wireless / network diagram.

  Finally, the "so slow I want to die" may be caused by the printing software - programs sometimes even 'good' can develop problems just hanging out on the computer for awhile.  You can remove the program from the printer and then replace it with a new copy of the software service Support full page for the Web site of your printer.

  Printer: printer e-all-in-one HP ENVY 5643

  Full software features:

  File name: EN5640_117.exe

• does not scan the whole page, only the column

  My All-in-one HP Officejet Pro L7580 scanner does not scan the entire page.

  Regardless of where to send... Word, Mail, photos... all I get is about 3 inches of column of the entire page.

  What can I do to remedy this?

  IF the copy works perfectly. Try to open the HP Solution Center and find the settings > scan settings > scan document or scan picture settings.

  Search for advance settings or more and are looking for an option on the digitization of multiple files or just the entire page or something to that effect. The software may have missed in the analysis just a part of it. You can check the settings where you can have a preview of the scanned document and find the broken line around the scanned image, you need to move, it will scan what's inside the broken line.

• How can I select only a part of a page to analyze instead of having to scan the entire page?

  On my old Epson scanner I could do a preview and select only a position from one page to analyze.  In the garden of Image with my MX 6320, the only option is to scan the entire page.

  How can I select what I want scan before scanning?

  Thank you

  Allen

  Hello

  Mac 10.9.4.  I called Canon and the Lady walked me through what I need to know.  She told me to get rid completely of my kindergarten picture on my Mac, then in the utility scan select Scan speed and now I get a preview window where I can choose the portion I want scanned.

  Thank you

  Allen

• LaserJet m276n mfp 200pro: ADF scanning not scanning the whole page

  I'm trying to scan documents using the car charger, but only about 2/3 of the width and 2/3 of the length of each page are analyzed.  I am scanning through the scanning on windows 10 application and selecting the option auto charger.  I tried selecting the scan to the all-in-one computer option rom device but given that we first installed the device last year it was still frozen and analyzed by this method.  Scanning from the tray works fine and it scan the entire page.

  Hi @Peter1960,

  Welcome to the HP Forums!

  I understand that your automatic charger on your mfp HP Laserjet 200pro m276n does not scan the entire page. I'm happy to help you!

  What is the type/size of paper that you use for scanning in the ADF?

  In the meantime, please try our program printing HP and doctor Scan and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps, and hope to hear from you soon!

• Printing a blank page

  Whenever I print a document follows a white. How can I fix?

  Thanks for the reply.

  I would like to run the print HP and Dr. Scan to try to dispel the impression of the black page after your document. If you don't have it already, please make a copy of the front of the printer. The blank page follows the copy?

  Try to check for updates on the front panel of the printer, press the Web Services icon in the upper left corner > settings > Product Updates > search for updates of the product now.

• HP Photosmart 5520: Printer prints blank pages suddenly

  Yesterday, my printer decided that he would simply print blank pages with a black line in the middle. I did a test print via the configuration menu and it prints fine. My wife can print wireless. And until yesterday I had no problem.

  On and off, but today, I have the same problem. Help?

  Hi @StuartY123,

  Welcome to the Forums of HP Support!

  I see you are having problems printing from your Mac to your printer HP Photosmart 5520, but your wife is able to print correctly. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there is something wrong with the print on your Mac driver. To resolve this problem, we will need refresh your printing system and re - add the printer driver.

  Reset the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Photosmart back in right now.

  Once the reset is complete, proceed to the next step.

  Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Add device:
  1. click on the menu of Apple , then Preferences System.

  2. click on print and scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver of the HP Photosmart camera is selected.

  

  6. click Add to add the printer to the list. Do not add the AirPrint driver.

  Source

  Once your printer is properly added to, please try printing again to verify that the problem is now resolved.

  Published by Mr X-23source.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Pavilion a6312p: Photosmart 7510 prints blank page

  I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

  I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

  Hi bankercop,

  I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

  Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

  Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

  I hope this helps you. See you soon!

• Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

  Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink.  Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem.  Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found.  I followed the video instructions from HP customer support, but the problem persists.  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...

  Given that you've tried the HP web site, try these videos Youtube here.

  https://www.YouTube.com/results?search_query=DeskJet+1000+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• OfficeJet Pro 8500 has prints a blank page before each print job

  He just started this recently. Prints a blank page before each print job. Because of this quirk, I can't print now before backward.

  Hi Stevienext,

  Thanks for your response with your OS info!

  I would say that running the HP print and Scan Doctor to start to see if that solves the problem.

  If the problem persists, continue.

  Then, try to print from a few different programs to see if the problem occurs in only program or more. This will help us better to 'target' the question.

  Let me know if the pages are still printing in white and that the programmes seem to be giving you the problem.

  I'll do more if necessary suggestions there!

  Have a great weekend

• photosmart HP 6520 printing blank pages

  As soon as the printer turns on, it prints blank pages and does not stop until you cancel on the printer. After 30 seconds or more, it starts to do the same thing again until you cancel print.  nothing appears on the computer that is waiting for printing or printing.  the printer is connected to the computer via usb. Ive tried to restart the computer and the printer and do a factory reset of the printer.

  Hi @jim_tuck89

  What operating system and version do you have? Mac or Windows?

  If you have a Windows operating system, start printing HP and doctor Scan. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  I can't wait to hear back on your part.