SCCM 2012 detection method

Similar Questions

• P310 and SCCM 2012 R2 questions

  Hello everyone

  We have just received the new Thinkcenters P310 and we were tring to the image using SCCM 2012 R2.

  We import the driver for the card in the bootimage and it gets the IP address and load to the top of the SCCM screen and then when it gets to the initialization of Windows PE treatment network connection it goes to a white screen and then reboots.

  A successful summer with an imaging using SCCM R2 2012 P310. All our other Lenovo P300 system have no problem and thin image.

  Thank you

  Dave

  Just checking... you use these drivers in your copy of PE built from the Windows 10 ADK (even if the deployment of W8.1)

  https://support.Lenovo.com/us/en/olddownloads/ds106096

  Your infrastructure can support UEFI mode for the purposes of the application of image? Otherwise, make sure that the system is not in pure UEFI, a setting in BIOS mode. If this isn't the case, you need to adjust the settings of the bios. A quick way to do this is to choose "Use optimized default OS" = DISABLE. Then save the settings. then load the BIOS default settings, and then save again.

  Check the TPM secure, make sure it is in quiet mode, if you are in legacy bios mode, PTT mode if you are using UEFI pure (once again, a BIOS setting)

  A pack of driver for Windows 8.1 for SCCM deployment, covering W7 and W10 instead has not been certified.

  You can try this pack, quite informal and not supported. These machines are similar in architecture to the P310

  https://support.lenovo.com/us/en/olddownloads/ds111957.

  Alternatively, you can make your own pack driver 8.x Windows... This would contain newer drivers...

  go to this URL: https://download.lenovo.com/cdrt/tools/drivermatrix/dm.html

  Put in your P310 four-digit machine type (this isn't P310, it would be something like 30AT) and change the operating system for Win8, you should see drivers, extract orders and install silencers. You can download the drivers from this page.

  Remove one of the references of the video driver from your driver package IF your willing P310 with a processor Xeon E3-12xx that ends in a 0 or a 1. These processors do not support the integrated graphics card, which means you must have a discrete graphics card. If you have an nvidia graphics card, do not inject video drivers under the PnP detection process. Instead, set up the driver installation video as part of a sequence of tasks such as installing any other program as an administrator. Search for channels of installation in silent mode for Nvidia video drivers to do this. Generally, an install a Nvidia of PnP driver is a big pain, better to install as a regular software.

• Satellite Z930-14F - cannot install Win 8.1 SCCM 2012 R2 environment

  Hi all

  Series laptops Z Sattelite impossible to install OS (win 8.1) of our SCCM 2012 R2 environment.

  No installation or pxe boot interrupted error is shown.
  The environment is used in order to correctly install the operating system (win 8.1) on various other seller computers (dell) and the VMS (hyper-v and vmware).

  I tried boot UEFI and CMS options and tried to turn off the secure boot. Please advice.

  Also, I read on the 'package to install SCCM for Toshiba. This will help in my situation or it's just the driver for SCCM packages?

  Best regards, Evgeny.

  I assume you mean on this package from Toshiba:
  http://www.Toshiba.EU/services/on-demand/business-computing/sdp120gs-v/

  I put t have much experience using this drive package SCCM, but it is certainly compatible with professional Toshiba laptops. The Satellite / Portege Z930 belong to the range of the company, and I think that the package must be compatible.
  This package seems to be for all administrators that manage devices on the network of business with SCCM 2012 R2. Toshiba offers with the new SCCM Toshiba package a solution to integrate other laptop to an existing IT infrastructure quickly and smoothly and all the Driver from Toshiba and application packages and a demonstration task sequence are integrated.

  However, it seems that you could get more details about this package directly from Toshiba [email protected]

  By the way: The Win 8.1 installation requires the UEFI mode (in which case the UEFI BIOS is available). But the start of another external source requires the secure boot disabled option.
  Then maybe you should use the UEFI mode but must clear the safe boot option to boot from LAN.

• Revolve 810 and SCCM 2012

  I'm trying to deploy an operating system via SCCM 2012 a 810 turn and I'm having no luck with the driver for the CARD. I loaded the driver downloaded in SCCM and it is important without error but don't deploy. I put the driver on a usb key and it will load fine.

  Look in the file INF of the PCI VEN number is not there for the hardware in the Device Manager, is the right driver?

  Any suggestions on getting this driver to work with SCCM?

  This driver from Intel has solved the problem for me:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3299 & DwnldID = 18713 & Keyword = 82579LM + Driver & lang = eng

• EliteBook 8570p: BCU and SCCM 2012 WinPE10 error 0x0000000A and task sequence 0x0000000B

  I am trying to run an OSD task sequence in SCCM 2012 to set the BIOS Setup, secure TPM activation and switching to native mode UEFI in preperation for BitLocker, then BIOS password setting all of in WinPE. The command below works fine when connected to the laptop in full Windows 10 cmd prompt, but for some reason I get and error when trying to run task sequence command.

  Using the version of the NBU: 4.0.13.1

  Version of WinPE 10 x 64: 10.0.10240.16384

  "' RunBCU.cmd /setconfig:"Config\8570pconfig.repset' /cspwdfile:"Config\oldpassword.bin ' /nspwdfile:"Config\newpassword.bin '.

  Where are the log files of the utility?

  What does the error 0x0000000A and 0x0000000B?

  What Miss me?

  Any help would be much appreciated. Thank you.

  Please, look at the white paper following developed to help understand how to manage the TPM and also not recommended for SCCM

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/whitepapers/building, %20Deploying,%20and%20Updating%20an%20Image%20on%20HP%20Commercial%20PCs.pdf

  other whitepapers are available from www.hp.com/go/clientmanagement

  BTW, it seems that you must set the pwd BIOS FRONT to manage the TPM

• How to capture language settings by using the Sccm 2012 task sequence.

  Help, please

  I want to capture language settings by using the Sccm 2012 task sequence.

  for example, if I push the task sequence on a computer through the software Center... He must capture the machine language first, and then format the machine and then restore back language settings... I'm not sure if USMT capture language using the task sequence settings... could you please help and let me know if any solution for this

  Thanks in advance

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• SCCM 2012 all software updates - download 0%

  We have a SCCM 2012 R2 infrastructure. Software updates were working a few weeks ago. Now, all updates have "TΘlΘcharge (0% complète)" in the Software Center. Other software that is not updated have "TΘlΘcharge (0% Complete)" status as well.

  The content is on the Distribution point. Limit is defined for the client computer. Limit is a limit group. Boundary group is assigned to a Distribution Point. Client computers have this DataTransferService.log:

  Sending request for DAV error. The 500 status code HTTP 'Internal Server Error' DataTransferService 21/12/2015 13:39:27 3276 (0x0CCC)
  GetDirectoryList_HTTP ("https://SERVERNAME.COMPANY.COM:443 / NOCERT_SMS_DP_SMSPKG$ / ebcb39f4-0aaa-4ce6-8012-90206447555a'") failed with code 0x87d0027e. DataTransferService 2015/12/21 13:39:27 3276 (0x0CCC)
  Non-recoverable error retrieving manifest (0x87d0027e). DataTransferService 2015/12/21 13:39:27 3276 (0x0CCC).

  I checked IIS, including permissions to the Point of Distribution and ASP .NET version which is 4.6, according to me.

  Help, please. We're dead in the water with the updated software and other telesoftware right now. Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Join the SCCM R2 2012 primary site in front of the pile of pre-existing R2 SCCM 2012

  Hello

  I have a client who intends to install in his office in El El Salvador a SCCM 2012 R2 server as the main site.

  This new server want and then attach to the hierarchy who have already installed in Spain, who have a SCCM 2012 R2 server with the role IF.

  The areas between the two offices are different forests, working for allowing communication between the two offices using trust relationships in Active Directory.

  The question I have is, if we can install SCCM primary site and possibly join the existing CAS server?

  Thanks to advice.

  Best regards

  Manual

  Hello

  SCCM is not supported in these forums. I suggest that you try to repost your question in the relevant forum on Microsoft TechNet:

  https://social.technet.Microsoft.com/forums/en-us/home

  Thank you.

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• PXE no longer works after upgrade SCCM 2012 R2 SP1 CU2 to SCCM 2012 R2 Sp1 CU3

  We have recently improved SCCM 2012 R SP1 CU2 Cu3 to SCCM and PXE has stopped working.

  We have about 55 DP servers in various locations, and all have active PXE. We have this problem in all locations.

  Until I did follow the troubleshooting steps below

  (1) uninstall WAIK 10,

  (2) removed from sccm boot images

  (3) installed WAIK 10

  Boot images 4) imported from sccm

  Boot images redistributed, but always PXE boot fails with the message "not received no boot PXE-53 file name."

  SMS PXE newspapers doesn't show any errors. Everyone has faced this problem. ?

  Hello Brice,.

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?Forum=configmanagerosd

  Thank you

• Install MS Office SCCM 2012

  Hello

  I have problems to install MS Office via SCCM 2012 2013. I get the error message: unable to make changes to your software (change of software returned error code 0x87D00213(-2016411117))

  Jules

  Your problem is the best answer in the forum dedicated to SCCM 2012 on Technet:

  http://social.technet.Microsoft.com/forums/SystemCenter/en-us/f7764b41-8b0d-46fa-a64b-b9bf0053b66d/

• Ways to populate a list of distribution of a collection of SCCM 2012 full of PC?

  G ' Day to all,

  So in the establishment with whom I work, we have Active Directory 2008 R2, groups that populate the SCCM 2012 collections and send the software, patching, etc for the machines.

  One of the collections is responsible for the shipment of windows, Adobe & office patch a few days to come as a group of tests.

  The process for this group, we will email all primary users for each PC in the collection in SCCM and let them know that they will be receiving patches at the beginning.

  We have the Mail field in SCCM for filled users, so all we need to do is recover the primary user for each PC in the collection and populate a list of email of this.

  Other information in the case, it is relevant:

  We are on Exchange 2012.

  Some users have nothing in the mail field in SCCM (eg. admin accounts)

  Can anyone suggest a way to do this? :)

  G ' Day downunder

  This question is way off-topic in these consumers, end-users forums. You will have a much better chance of finding someone who knows what you tell more about TechNet, where hang out of the it professional and system administrators. Try here to get started: http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager

• SCCM 2012 R2 and Adobe create clouds

  I built the package with the new manager of adobe that said links he puts acrobat and all in the record of generation.  now, I want to deploy the package with SCCM 2012 R2.  but was it the .bat file that I need to create to make it happen.  I want to install unattendend quiet and not restart for the machines.

  1. adobe Reader DC. I have run the adobe customization tool and I have a mst file.  so, what's my command for this? I also want the command to remove the old version of the Adobe reader installed.

  Install the player with an STD

  msiexec /i TRANSFORMS = "filename.mst"

  To uninstall

  msiexec /x "c:\filename.msi" / q

  s http://www.Adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Cmdline.html#silent-uninstall

  Obviously change "filename" to the actual name of your MSI file or STDS.

  2. cloud to create adobe I used adobe Packager to build.  I want to be sure and install everything that I took the package includes acrobat.  What is the command for this?

  Syntax

  Setup [-silent] [-ADOBEINSTALLDIR =] [-INSTALLLANGUAGE =]

  Syntax example:

  Setup.exe - silent - ADOBEINSTALLDIR = "C:\InstallDir" - INSTALLLANGUAGE = fr_CA

  Location of setup.exe:

  [Package] \Build

  See also https://helpx.adobe.com/creative-cloud/packager/deploying-packages.html

  https://helpx.Adobe.com/creative-cloud/Packager/deploying-packages-SCCM.html

• PCOIP disconnects when you connect with SCCM 2012

  We have two servers view 5.2.0 our handling connections. The machines have 5.2.0 Agent and the client is 5.3.0. We just migrate all our users on these new servers and decided to use pcoip as it is by default, but now, when we use SCCM 2012 to support our users as soon as we can connect with the remote, it disconnects the user. When the user connects with RDP we don't have any problems. Is this a limitation with PCOIP?

  Teradici come back to me. Unfortunately currently the only way to shadow users desktop is to use vSphere. With a variety of physical and virtual machines, it is not possible to use two different solutions.

  http://TechSupport.Teradici.com/ICS/support/kbAnswer.asp?deptID=15164&task=knowledge&questionID=1239

  See above for how to do if you wish.

• Is there a SCCM 2012 catalog for the Firefox NPAPI Flash update?

  We use SCCM 2012 and 2011 SCUP to deploy our Flash ActiveX and Plugin updates using the catalog that adobe provides. (thanks Adobe for this!). I wonder if there is a catalog for the Firefox, NPAPI plugin?

  Hi Sandy,

  The Flash Player SCUP catalog includes ActiveX plugin and NPAPI.  If you currently register Flash Player, you should have received an email with the link to the download page.  If you currently assign Flash Player, you will need to allow for distribution within your organization.  Please see Adobe Flash Player Distribution. Adobe to apply for a license. You will then receive an email with a URL to download the catalogue.

  --

  Maria