Scheduler task does SyncToy as expected but Will Run On Demand

Similar Questions

• Windows 8 does not read DVD but CD runs without any problem

  Original title - I habe upgrade to windows 8 way back but my DVD player does not read DVD but CD runs without any problem

  DVD stalk does not read DVDs but reading the CD with no problems. Even in my computer drive shows as CD drive type.

  Hi Rohan,

  I suggest you try the steps suggested by AtishayMSFT dated dated March 6, 2012 at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/DVD-drive-not-recognized-in-Windows-8/ad546c20-b916-4AD5-9858-52e10610ee14

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• Scheduled task does not start unless I am connected

  When I schedule a task, it will run if I am connected, but if I am offline scheduler pointed out that I could not start the task.  How can I solve the problem?

  Thank you!

  I finally found out what was the problem; the program I want to run resides on a network drive, I had mapped to a network drive to the location of the file, the name of the file the task scheduler has tried to run included the mapped network drive.  When I put the absolute path to the file to execute, it worked as expected.  I discovered the problem by looking at the Task Scheduler Log, indicating that the file is not found.  The program that the Task Scheduler runs consulted files sent with the mapped network drive and it works as expected, but for some reason that task scheduler failed to start the program by using the mapped network drive.

  I want to thank each of you for your help to solve this problem.

  Thank you

  Liguore

  Thank you for pointing me in the right direction.

• Scheduled task does not play if already open WMP, trying to avoid manual close

  I'm in a work centre that will make announcements every day on a speaker system that is run by windows media player. I set up a scheduled task to all files that will play, but once the said file is played WMP does not close automatically. This does not seem like a problem, but if nobody closes on WMP, the next scheduled task will not - play which completely defeated the purpose to automate the process and our workers will have to still remember to close WMP 3 or 4 times a day, otherwise nobody gets the announcement.

  I have tried implementing a command line with /play wmplayer start/close c:myfile.wav as an executable file and run it with the Task Scheduler instead of the wav file... it did not work. Namely, the /close function was abandoned with WMP.

  Is it possible that I can continue to use WMP and completely automate this process without the manual close WMP after each scheduled task?

  Hi Rodvold,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.

  To change the scheduled tasks in Windows XP, you can also check this link:

  How to modify the scheduled tasks in Windows XP

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8 scheduled task does not work with spaces in the path of the program

  Hello, I walked with this problem. I created a basic task using the Task Scheduler, and I noticed if the program you want the task to run, it's the path contains white space, it will not work.

  Does anyone know how to solve?

  I tried with this http://support.microsoft.com/kb/823093/en-us, but could not make it work.

  Thank you.

  I had the same problem http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/scheduled-tasks-don ' t-run-pops-up-how-do-you-want/14e9f209-09b7-46a9-8739-ba821b565e1b?tm=1430262836762 with a task "alarm" working if the file name has spaces. I renamed the file, but win8.1 must be able to handle spaces in the directory/file names. I think it's a bug.

• Task Scheduler task shows as completed successfully, but nothing happened

  I have some .bat files I created added to my task scheduler on our server at the fire every day from 05:00.  Tasks run a series of SQL commands and a find and replace the application third for updating a MySQL database that we use for a web application.  SQL event on demand are not an option for us.

  When I run the task manually it works fine (I'm an administrator has full permissions), either by double-clicking the .bat file, either by selecting the task in the Task Scheduler task by clicking on 'run '.

  Tasks have been reportedly shot every day for more than a week and all history journals say the operation completed successfully, but when I check the MySQL database, that nothing has actually happened.

  To add to the confusion, what is happening on 2 3 .bat files that I wrote.  One works perfectly, not.

  I have the defined task to "Run if the user is logged in or not", and "Run with the highest privileges" and our server, Windows 2012 R2.

  My apologies if I'm missing something obvious, I am a JavaScript/PHP web developer, who was lifted in the server environment and, although most of this is logical on a base level for me, a lot of nuances are lost.

  Thanks in advance for any help.

  Hello

  Please post your request in the forum for better support.

  TechNet

  Thank you.

• Scheduled tasks does not

  Hi all

  I have a page that executes the code and generates email. I can run this page very well in the browser, but when I schedule it, nothing happens. If I manually run the task in the Scheduler, the task said that he ran.

  I have included a user account and the pw in the scheduled task that has access to the page.

  I am at a loss here...

  ??

  Nothing is currently limited by security.

  Thank you

  John

  I understood what my problem was... was to generate the results to a file C:\... and then I saw an error... due isDefine a variable.

• Why scheduled task does not?

  I put the same tasks schduled for different periods, certain tasks of work, but some tasks do not work.

  and I checked all the settings, which are identical except for periods of time.

  Anyone have any suggestions on what evil is? and how to check it?

  Thanks in advance for your suggestions

  Task of 0500

  0530 task

  Task of 0600

  0630 task

  You can address the issue in two steps:

  Compare task definitions 1

  1.1 use the export feature on the right side of the window Scheduler of tasks to export each of the task definitions.

  1.2 each of the definitions of exported tasks will be an xml file, each of them [they open in IE] open then select all text & paste it in Excel, with only one task in the first column, the next task in the next column,... until you have them all.

  1.3 using Excel, simply because it's a convenient way to see tasks-by-side, look at each line to see what the differences are there between them other than the time set for them.

  1.4 use the results to eliminate all unwanted differences that exist.

  2 stories of review

  2.1 open Task Scheduler

  2.2 Select one of the tasks that successfully ran in half [the list] window superior & select the history tab in the half lower the window.  Look through the bewildering sequence of events that occur during the task initiation & execution.

  2.3 select one of the tasks that do not run correctly in half upper window [the list] & select the history tab in the half lower the window.  Look through the bewildering sequence of events that occur during this task initiation & execution.

  2.4 find a difference in the stories and then select event & look in its tabs general & Details below to see what you can find out what caused the difference in behavior.

  Note these links could shed more light on the details you are looking at: -.

  Task Scheduler Overview - MSTechNet

  Task Scheduler Windows Dev Center

  Task Scheduler - Microsoft TechNet Search

  MSDN Task Scheduler

• Scheduled task does not exist, yet still short

  Some time ago I implemented a simple batch file as a task scheduled to run at 07:00 every day, and he does so since then.  It starts DTExec.exe to do a load of data and send me an email when it is successful.

  Now I want to change the run time - but I can't find work anywhere!  I do not see it in Task Scheduler (and yes I putShow hidden tasks ), the task name appears nowhere in \Windows\Tasks or \Windows\System32\Tasks

  No schedule in such a way does seem to exist - yet the task always runs daily so there must be somewhere!  If not, where can I get?

  (It's on Windows 7 Home Premium, and my account does not have administrator rights. The task of the TA is configured to use the system account.)

  More info: looking at the logs with Event Viewer, I see in the application log an entry at 07:00:22 to SQLISPackage100 that says that my task is completed then.

  But the newspaper Windows/TaskScheduler operational, there is no event at 7:00!  There is something to 06:52 then the following entry is RacTask starting at 07:14:16

  Is there something in windows that can perform tasks of the user to fire time OTHER than Task Scheduler?  Maybe I'm looking at the bad service?
  Ah - that's all!  Opened by SQL Agent jobs do not appear in the list of Task Scheduler (and I had forgotten that I would be implemented in this way).

  > Article 2nd Wright of debugging: If you can't find the bug, looking for it in the wrong place.  (1st rule: there is always a bug.)

• Scheduled task does not run on Windows Server 2008 r2

  Hi all

  Hope it's right,

  Sir I am using windows server 2008 r2.

  in what I use schedule a task to run a windows application that needs to run in 04:00 every morning.
  but this time he's not running as a last result, I get this error 0xE0434F4D code

  why I get this error?

  How to run this application?

  Thank you

  Hello VickyUM,
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  Hope this information helps.
   
  Good day!
   

• Scheduled task does not start: error value: 2147942402

  "Support for transactions in the specified file system resource manager is not started or was stopped because of an error".  + Task error value: 214794202

  Hello

  I'm working on a machine with Vista Home installed. I have a setup of the task in the Task Scheduler that works very well for a few days, and then is unable to boot with the error value: 2147942402. I then try to delete the task, but receive a window pop up with an error:

  "Support for transactions in the specified file system resource manager is not started or was stopped because of an error".

  Do a search on Google, I found some topics related to the 1st error, perhaps caused by Task Scheduler lose credentials on a reboot of the system. But the second is fooling me. Help?

  Hello jeffk2009,

  Please see the link below on the Microsoft TechNet Forum.  There is a link for one software patch other than those mentioned above.   Please let us know status.

  Error value: 2147942402

  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/0a9b34e9-3FA8-41B5-b878-e2275c12488f

• A scheduled task shows she completed successfully, but it really didn't. How can I fix?

  The task that I put in place runs the following image:

  

  The task runs a script file SQL for the database on drive E:\ which is an external drive for backup.

  When E:\ is not present, of course, the task is not ended, but the Scheduler of tasks that are still actions successfully completed.

  I'm assuming that the Task Scheduler is just by saying "I've been able to run the script with the specified program file, then it has succeeded," but this is really not what I'm after. I need to know if the tasks in the script that is running the Scheduler of tasks actually performed.

  Is there something I can do to report if the task succeeded or not, so that the Task Scheduler shows correctly?

  I know that this is possible if you use a batch file that uses the exit codes (I'm sure that other types of scripts have end codes, but I'm not familiar with most of the other types of scripts).

  You can check with the developers/scripting Microsoft Developer Network forums.  These MSDN forums are intended more to this, while this community is more concentrated consumer.

  http://msdn.Microsoft.com/forums

• Firefox does not display videos, but will be Chrome/IE.

  It's all in the title really. FF does not appear videos. In Youtube, the screen is black, apart from the red button 'play' in the middle. When I click on play it says "an error has occurred." In all the other video sites, video section is empty, white. I have uninstalled/reinstalled Firefox and Adobe Flash Player. Firefox is also fully updated.

  Hey mick3690, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• Windows XP Pro - failure of the scheduled task?

  Why my regular job failure?

  Is there an example page on things to do and not do?

  I have a backup program will not work correctly.

  TY,

  Bill

  Hi Bill,

  1. what exactly happens when you run the backup program?

  If a scheduled task does not run when you expect it, right-click the task, and then click Properties. On the Task tab, make sure that the enabled check box is selected. On the tab schedule, check that planning is set correctly.

  See scheduled tasks troubleshooting
  See also How do I solve the scheduled tasks in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.