Scheduled task does not start: error value: 2147942402

Similar Questions

• Scheduled task does not start unless I am connected

  When I schedule a task, it will run if I am connected, but if I am offline scheduler pointed out that I could not start the task.  How can I solve the problem?

  Thank you!

  I finally found out what was the problem; the program I want to run resides on a network drive, I had mapped to a network drive to the location of the file, the name of the file the task scheduler has tried to run included the mapped network drive.  When I put the absolute path to the file to execute, it worked as expected.  I discovered the problem by looking at the Task Scheduler Log, indicating that the file is not found.  The program that the Task Scheduler runs consulted files sent with the mapped network drive and it works as expected, but for some reason that task scheduler failed to start the program by using the mapped network drive.

  I want to thank each of you for your help to solve this problem.

  Thank you

  Liguore

  Thank you for pointing me in the right direction.

• Scheduled task does not play if already open WMP, trying to avoid manual close

  I'm in a work centre that will make announcements every day on a speaker system that is run by windows media player. I set up a scheduled task to all files that will play, but once the said file is played WMP does not close automatically. This does not seem like a problem, but if nobody closes on WMP, the next scheduled task will not - play which completely defeated the purpose to automate the process and our workers will have to still remember to close WMP 3 or 4 times a day, otherwise nobody gets the announcement.

  I have tried implementing a command line with /play wmplayer start/close c:myfile.wav as an executable file and run it with the Task Scheduler instead of the wav file... it did not work. Namely, the /close function was abandoned with WMP.

  Is it possible that I can continue to use WMP and completely automate this process without the manual close WMP after each scheduled task?

  Hi Rodvold,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.

  To change the scheduled tasks in Windows XP, you can also check this link:

  How to modify the scheduled tasks in Windows XP

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• TC - 705 crashed. does not start. error message

  My sucks TC-705 crashed.  It does not start.  error message saying lack driver DVD player.  At the beginning I was not too worried because my recovery is on a USB key.  He went through the installation process, but the re-boot did it again.  Endless loop.  I tried all repair options without success.  I went to the command prompt and run the scan and repair.  Scanned very well, she could not make the repairs.  If nothing worked the hard drive may be damaged, said a source online.  I put a new disc in, but there was no improvement.

  Where should I go from here?

  Ironfly,

  I downloaded vanilla but after I extracted it I could not make heads or tails of it.  The Readme went on and on the forums running with it but not said me something about how to launch it.  I have a question on how to launch online, but the first statement, I had was to open my WOW file.  I knew then that I had wandered in some elses universe.  After reading more later, I realized that he was playing.

  All of this is moot right now because my DVD drive and all my usb ports are dead.  There is nowhere where ever I go except in the bios.

  At this point, I don't think that there is nothing I can do.  The computer is still under warranty and I have a one year protection plan so I'll let Newegg and Acer deal with reclamation.

  I wish I could give you a hundred Bravo for all your efforts.  Thank you and all those who participated.

  unktim

• StarTech ec1pecps parallel adapter does not start, error 10

  I'm having trouble installing a parallel adapter from Startech ec1pecps on my laptop Dell inspiron 9400 running XP. I tried new drivers and the advice of the other forums, but the device driver says: "device cannot start error 10.» I received no response from Startech on it. Can anyone help?

  Hi GregSwinburne,

  ·         Have you tried to connect the unit to a different computer and check?

  The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  You can also run the troubleshooter and check if it works.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows xp Task Scheduler service does not start

  I have a problem with the Task Scheduler in XP SP3 (home edition) service. The service is configured to start automatically, but hangs during startup and the State is 'starting' permanently In this State, I can't start or stop the service manually.  If I disabled the service completely, restart, put it to manual and click Start, I get the following error:

  Unable to start the task on the local computer Scheduler service
  Error 1053: The service did not demand launch or control in a timely

  I am under an administrator with a password account, so that shouldn't be the problem
  The CPP and the services event log work correctly (Autostart value)

  I need to get this service running in order to allow the read-ahead on this pc. Currently the prefetch folder is totally empty the .ini file is missing as well as all the .pf files. I tried to rebuild the .ini with the help of the > rundll32.exe advapi32.dll, ProcessIdleTasks< command="" at="" the="" command="" prompt="" but="" this="" doesn't="" do="" anything,="" probably="" because="" of="" the="" lack="" of="" the="" scheduler="" service.="" in="" the="" registry,="" enable="" prefetcher="" is="" set="" to="" 3,="" monitoring="" both="" applications="" and="">

  Scheduler tasks and prefetch worked very well - I think that a setting in the registry is damaged or missing. Any suggestions on how to fix this? Thanks in advance.

  It's curious.  The ST journal file must be in the Windows folder.

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311
  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  I don't know where to put the file mstask.ini - windows\system32 maybe?  There is no .ini file in the folder inf. so I don't know and you may need to try different places and keep reading...

  I don't think I've never reinstalled TS (but other things) so I did all the instructions on how to do it, but if the installation stops and asks you for a file, at this point, leave the installation 'wait' and then search your HARD drive for the file he wants to (be sure to include the search for hidden and system files too) and if/when you find return to the installation of waiting and fill the void or navigate to the folder where the installation file is enough (point installation where the file is, so it can find the file he wants to) and continue up to the next point.  You may need to do it for multiple files until you get all the way through it and you will see that some are just not on your HARD drive and you need to download.  You can't cancel the installation and start over every time - just work through a single file at a time by pointing the installation to the folder where the file he needs.

  Maybe later, I reinstall my TS service to practice and be able to understand the files he needs and give some better advice about this.

  Comodo may also interfere (I do not use it, but it's possible).  Did you see if your TS will start with disabled Comodo?

  You should also consider the malware, then you might want to start with this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• Scheduled task does not exist, yet still short

  Some time ago I implemented a simple batch file as a task scheduled to run at 07:00 every day, and he does so since then.  It starts DTExec.exe to do a load of data and send me an email when it is successful.

  Now I want to change the run time - but I can't find work anywhere!  I do not see it in Task Scheduler (and yes I putShow hidden tasks ), the task name appears nowhere in \Windows\Tasks or \Windows\System32\Tasks

  No schedule in such a way does seem to exist - yet the task always runs daily so there must be somewhere!  If not, where can I get?

  (It's on Windows 7 Home Premium, and my account does not have administrator rights. The task of the TA is configured to use the system account.)

  More info: looking at the logs with Event Viewer, I see in the application log an entry at 07:00:22 to SQLISPackage100 that says that my task is completed then.

  But the newspaper Windows/TaskScheduler operational, there is no event at 7:00!  There is something to 06:52 then the following entry is RacTask starting at 07:14:16

  Is there something in windows that can perform tasks of the user to fire time OTHER than Task Scheduler?  Maybe I'm looking at the bad service?
  Ah - that's all!  Opened by SQL Agent jobs do not appear in the list of Task Scheduler (and I had forgotten that I would be implemented in this way).

  > Article 2nd Wright of debugging: If you can't find the bug, looking for it in the wrong place.  (1st rule: there is always a bug.)

• Laptop does not start: error BCD on Acer Aspire M3-581

  Hello

  Acer Aspire M3 581PTG my son has stopped booting.  At the start, immediately after the Acer logo, it now shows a blue screen with the message:

  Recovery

  Certain required information does not appear in the data of Configuration startup file. File: \BCD Error code: 0xc000000d

  He then refers to using the tools of recovery and the media, but we cannot locate Acer recovery disks and do not remember if the laptop came with everything.  I started by using a normal 8.1 Windows installation CD and tried to use different repair options, but nothing worked (perhaps because Acer has a SSD and HDD so need a specialized repair utility?).

  We contacted Acer but just received a generic response to do a factory reset.  If anyone has encountered this error or is able to offer a solution?

  Thank you.

  Try this:

  http://itsolutionsblog.NET/solution-to-your-PC-needs-to-be-repaired/

  If you still have problems starting, I suspect a hardware failure at this point, maybe the SSD or HARD disk.

  Contact your regional Acer support service.

• No sound (audio service does not start, error 1079)

  I have no sound on my laptop.when I have troubleshooted the program that is to show that audio service does not work when I tried to start the audio service is not starting and showing an ERROR: 1079.

  I tried several times but it's showing the same...
  is there a solution for this problem?

  Hello

  Did you change your computer?

  This error code 1079, pop when you try to start the audio service?

  Method 1:

  (a) click Start, type services.msc and press ENTER.

  (b) double-click the "Windows Audio" service

  (c) click on the tab to open a session.

  (d) click Local System account, and then click OK.

  (e) right click on the "Windows Audio" service and then click Start.

  (f) follow the same steps for the service "Windows Audio Endpoint Builder.

  (g) check if the problem persists.

  I suggest you follow the link and check.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  http://support.Microsoft.com/kb/2478117

  Method 2:

  I suggest to uninstall the sound card in Device Manager and then reinstall it.

  Follow these steps:
  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically. Update the drivers manually for your sound card.

  Make sure that you have installed the Windows

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• WIN8 scheduled task does not work with spaces in the path of the program

  Hello, I walked with this problem. I created a basic task using the Task Scheduler, and I noticed if the program you want the task to run, it's the path contains white space, it will not work.

  Does anyone know how to solve?

  I tried with this http://support.microsoft.com/kb/823093/en-us, but could not make it work.

  Thank you.

  I had the same problem http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/scheduled-tasks-don ' t-run-pops-up-how-do-you-want/14e9f209-09b7-46a9-8739-ba821b565e1b?tm=1430262836762 with a task "alarm" working if the file name has spaces. I renamed the file, but win8.1 must be able to handle spaces in the directory/file names. I think it's a bug.