Scope display problem Windows 7

Similar Questions

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.

• Firewall problem: "due to an unidentified problem windows cannot display windows firewall settings.

  I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• "Due to an unidentified problem Windows cannot display Windows Firewall settings" on Windows XP

  Operating system: XP w/SP3. MS Security Essentials installed.  Problem: Cannot enable or disable the Windows Firewall; When you try to do, following statement appears; "Due to an unidentified problem Windows cannot display Windows Firewall settings.l

  I've seen this before when I try to make appear the firewall configuration panel before that my computer has started completely.  Wait a few minutes and try again has always worked for me...   But in this sense, it is possible that a piece of the network process which depends on the firewall is not started on your system.  Try to examine your system and Application logs:
  (Start-> Run-> "eventvwr.msc") or
  Start-> programs-> administration-> event viewer tools
  and look for errors in the process that may not have begun.

  HTH,
  JW

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• Display in Windows XP problems

  Original title: display windows win XP drivers

  have windows xp installed and have display problems

  Hello

  -Do you get any error messages?
  -What exactly is the problem with your screen?
  Suggestions for a question on the help forums

  You can follow the steps described in this article and check if this helps solve your problem.

  Resources for troubleshooting problems in Windows XP

• I could not hear any sound from my speakers, only used the tool of the window all still no sound, so upgraded to sp2, now having display problem & still can't hear it please help?

  I have xp home edition sp1 happen something with my sound on pc tools in the window couldn't resovle the problem, so updated to sp2, now, I posted problem cannot reset resolution on screen and still no sound, anyone has a solution?

  Hi JeanBolling,

  ·         What tools did you use to solve the problem?

  ·         What happens when you try to change the resolution?

  Method 1: Check if you have followed this guide from Microsoft.

  No sound in Windows

  Method 2: Uninstall the sound card and reinstall to check the issue.

  a. click Start, click Control Paneland then double-click System.

  b. click on the hardware tab.

  c. expand sound, video and game controllers.

  d. right click on the sound card, and then click on Uninstall.

  e. restart the computer. Log on to the manufacturer's Web site and update the latest audio drivers.

  Method 3: For the display problem, you can consult this article.

  Resources for troubleshooting problems in Windows XP

• Display problems with updates on Windows 7

  I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

  I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

  "We noticed that the issue has not been marked as an answer yet and we were wondering if you solved the problem."

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Yes, reinstalling my favorite of all time, Windows XP SP3 - that support has been extended. After weeks of removal of partitions, re-formatting of C drive, re - install Windows 7 and hacking and tweaking, I gave up. Then, when I started transferring files from 7 and re - install the software, my screen went new loony.

  Uninstalling Adobe Acrobat Reader removed the problem of XP.

  Eventually, I'll buy a laptop to the internet and use XP on this computer for my art and animation programs. Gossip says Internet 7 and 8 are not as secure as XP, so I'm in no hurry to buy. People are the display problems on Windows 10, too. So maybe there is a mole of Apple in the Windows technology crew.

• With output window display problems Webhelp/Webhelp Pro

  Hello

  I created a few projects webhelp after being informed by our team of QA and development projects I created HTML5 format were not compatible with 1.) old versions of IE [specifically the 7 and 8 - posted another discussion on this in the last couple months, tried the patch of shiv without result] and 2) the control used by the program to display a HTML file, mounted on a given device [iOS] - what I have said, this is true for iOS 7 and it is supposed to be a new version of IOS control 8 which supports the HTML features. But we are not there right now (still need to support iOS 7), by application QA/DEV, so I created the webhelp projects to see if these work and display better on devices.

  I noticed some display problems when I generate and view webhelp output. Initially, the books in the table of contents are cut off and I have to resize the TOC pane and drag the bar to scroll at the bottom of the viewport to see. But when I do this, the button of the search field in the toolbar is cut. Also, the initial vertical scroll bar displayed on the right side of the window apply to the entire window. In other words, I can't use it to scroll upwards or downwards in the displayed topic. Again, I have to resize the overall window or drag the scroll down bar all the way to the right, how I can see a partial 'hidden' vertical scroll bar for the window in the topic.

  The Properties window to create/edit a dialog box window for webhelp and webhelp pro provides much in the way of personalization or all that I can see related to these questions.

  Can anyone offer any suggestions on how I can get the window to display correctly?

  Thanks in advance for any help you can provide.

  Sincerely,

  DH

  HA! Looks like we stumbled on the solution by mistake. I checked the zoom setting and it was 90%. This has changed to 100% and voila'! No more double scrollbar. The skin - a little Diggin ' this Global Connect we've also changed. But you can now use a scrollbar to move up and down in the topic you would expect.

  

  Thanks for all your time and suggestions to help me solve this problem!

  DH