scrabble2003 does not load on Windows 7

Similar Questions

• Oblivion does not load on windows 7 Home premium 64-bit

  My game of the year oblivion edition does not load.  "I get a" problem with oblivion caused oblivion to close ' and 2 small black windows.  I tried to run it in Administrator as suggested by bethseda and compatibility mode.  I have an old three week computer has an Intel i7-860 2.8 GHz, 8 GB memory sdram ddr3 1333 mhz processor, with 1 GB ati radeon hd 4850 graphics card its integrated 7.1 which seems to meet the system requirements to run the game but the game won't load always.   Microsoft says that it is compatible with windows 7 so what causes this problem.

  You must also download the latest DirectX.

• computer/control panel does not load in windows 7

  Hello

  I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

  CONCERNING
  LEE

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, I suggest that you scan your computer for malicious programs:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• iTune does not load in Windows 10

  I tunes does not load on windows10

  You will need to provide more details - do you mean that:

  • You can not download iTunes Installer?
  • You can download the installer, but iTunes is not installed correctly?
  • You can install iTunes but it does not work?
  • iTunes works but does not display the contents of your library?
  • something else?

  If you can share any error messages you see who can help diagnose and solve your problem.

• You try to view medical records with CDVIEWER. It does not load on Windows 7 64 bit. Need help.

  I'm looking for some medical records using Windows 7 Home Premium 64. Records are on a CD that comes with the CD VIEWER integrated display the documents. However, it does not work on Windows 7. I opened enforcement administrator in compatibility mode checked and tried, 98 / Me, 2000, XP, and Vista modes but none of them works. Any suggestions?

  Tried to copy the cd image files in a directory of Documents and then open them with paint or photo look software (NB be sure to uncheck everything open allways with program xx)

• Pavillion G6 does not load in windows

  When I turn on the laptop, I see windows loading logo on a black screen as usual, this then past in an error screen saying there was an error in loading windows and it can not load now. It gives me options to launch start up repair (reccommended) or continue normally, after trying both of these options, both times, the screen turned gray as loading something then crashed. In this case the only thing I can do is turned off, no other buttons work. One of my friends told me to hit f8 or f10 just after putting the machine on, I tried, f8 gives me options like to go in safe mode (which I tried and the same lauch starts repair) between other optinos which I do not know what they mean or represent.

  I'm not in any way computer smart so don't know what is wrong or what to do about it, can anyone help please.

  Thank you

  Yes, call HP and they will send a new hard drive.

• Software Repair Wizard does not load in Windows XP Home Edition.

  I HAVE A HEWLETT PACKARD COMPUTER RUNNING WINDOWS XP HOME EDITION NOT SE NOT LOAD MY 'SOFTWARE REPAIR WIZARD"BECAUSE THE SYSTEM CANNOT FIND THE FILE"FLASH STUDIO PRO ERROR HANDLER.  I SEND AN E-MAIL TO HP SUPPORT OFFICER AND HE ALWAYS SAYS NOT AVAILABLE AT THIS TIME TO SUPPORT

  original title: NEED HELP TO GET SOFTWARE PROGRAM ASSISTANT FOR REPAIRS

  Hello

  Have you made changes on the computer before this problem?

  The following thread might be useful: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/Sonic-Software-Update/td-p/377117

• Windows 7 does not load after Windows update

  my computer has tried to do a windows update a few days ago and now it will not load windows. All I get is a black screen with a cursor.  I am able to access safe mode. I did a system restore, which did not work. Antivirus software can't find anything alarming. I checked the ram and the hard drive and nothing was found. Start diagnostic work and I tried to make the windows update again, but he could not give me the codes following three (1) 80246005 80246008 (2) and (3) 641.

  Hello

  Thanks for posting your query on the Microsoft Community.

  The error codes you mentioned, suggests that you are facing because of the updates of Windows. Here are two articles that will help you solve the problem.

  If you receive the Windows Update 80246005 error when checking for updates, it means generally that you cannot save the files to the Catroot2 folder or that the Cryptographic Service has not been started or is not working properly. Follow the steps below to correct these

  Windows Update error 80246005

  If you receive the Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  Windows Update error 80246008

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• The thrustmaster ferrari 458 italia does not load on windows 7

  When I have more the Ferrari 458 italia wheel into the USB port, windows 7 says it cannot find a driver for it.

  So when I go to Steam to play Need for Speed and I'm trying to change the options of controller as the steering wheel or pedals, it does nothing.

  I tried to download the xbox to windows ultility and he does not notice the wheel.

  ThrustMaster says it supports games that have the xbox for her controller, it's Need for Speed Shift, one of those games that is not >

  Also why Windows 7 doesn't see the wheel when ThrustMaster says it already has drivers for it?

  Here, any help would be appreciated.

  Thank you

  OK I know this is an old thread, but just in case someone else is watching, so it appears in the control panel under printers and devices, then his job very well, the problem is when you go into a game he dosnt appear like a wheel from thrustmaster, it appears as a gamepad xbox so if you choose your controller it will work very well hope this helps

• Adobe Flash Player does not load on windows 7 64 bit edition Home premium

  I keep getting error messages when I try to download adobe flash player. I have a new computer with windows 7 64 bit home premium installed. I need to upgrade to a better version of windows 7, such as pro or ultimate? I'm pretty sure that Internet Explorer is a 32-bit version with this operating system. But I can not find all 32-bit versions of Flash Player download. I tried to download another version of IE, a 64-bit version, but when it was all over I had the same version again.

  In addition, my windows Explorer freezes and restarts sometimes. Don't know why, the machine starts to slow down and then the articles are non-compliant, then explore shuts down and restarts.

  Why things just don't work? :)

  Hello

  This can help you, that flash can get corrupted:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  ______________________________________

  For your performance problems:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• 7300 series all-in-one software does not load in windows 8.1

  I have a 7310xi all in one. I recently installed a new desktop running windows 8.1. the connection is wireless. I can get the printer to print properly but cannot load the software. I need the software to be able to scan etc. I downloaded several times, uninstalled and reinstalled and still get the same result (I purge the temp file after each attempt). Everything goes very well with the download until the actual installation screen comes up. Once I hit the installation I get the message "the system cannot find the file specified." I tried hanging the printer with a USB port and still get the same results. I tried using the Dominican Republic printing HP, the installation wizard and continue to get the same thing. If I could determine precisely what file is not found maybe I could find it. I made sure all updates are running on the computer and tried something that sounded even close, I can fing on HP website. Any ideas would be greatly appreciated!

  Thanks, Mike

  Hi Mike1949.

  Sorry for the delay. You'll need get corrupted files fixed before you can install because they are the source of installation problems. To do this, you will need to contact the manufacturer of your computer (IE. HP, Dell) to get help with the files.

  Let me know how it goes.

  Thank you

• Windows does not load after Windows update on January 8, 2010

  Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

  There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

  So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

  I don't want to try to restore the computer to factory settings and lose everything I have.

  Help, please!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the worst happens, follow these steps below for data recovery before reinstallling:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• A page on a site does not load in Windows 10 or El Capitan

  From about two weeks, when I try to access www.steepandcheap.com/current-steal with the current version of Firefox on Windows 10, I can't. It is not that I get an error message, it's just like the page no longer exists, and I redirected to the main site. I tried in safe mode, and the same thing happens. This just started today on El Capitan, which I've been using since yesterday. This page has been in a tab permanently for years without any problem. In addition, it still works in Chrome, so I know it's still there. Any ideas? Thank you.

  Seems to work here.
  I get a page with a counter from the bottom right.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My Photoshop Cs and Image ready Cs disc does not load on Windows 7 can get a link to allow this to happen please

  Hello. Can someone help me with this please, I got a few responses but they confused me a bit, all I need is a simple link to download a solution please ohn

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• How to fix Photoshop when it does not load on windows 7?

  My version of Photoshop cs5.1 work stoppage a day there, and the only error message I get is Windows saying that Photoshop has stopped working.

  Someone at - it any other suggestions on what I need to do to solve this problem. I already uninstalled and reinstalled once and that has not worked. Please and thank you!

  This means generally that a driver or a third-party plugin was the cause of the accident.

  Make sure that you have updated your website of the manufacturer of the GPU video card driver.

  And if you have any third-party plugins installed, disable them until you can update.