Screen becomes market in unpredictable ways. Scans say everything is OK.

Similar Questions

• Windows Vista crashes, the screen becomes pink with diagonal dotted lines

  My HP Pavilion DV9500 laptop started making a few months ago:

  The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning.  The computer is about 3 years old now and have not had any problems before this.  I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this.  Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze.  A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".

  Hello

  It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
  pretty much excludes most of the causes of software if it could be driver related and there are other
  possible causes remotely. Video/display and its drivers are suspected leader and mother.
  Board and power supply.

  Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
  BigBox stores) or the manufacturer of your system Support.

  ===============================

  It's my generic convenience store and eventually it can help you determine the cause but I strongly
  suspect material.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

  Hello

  I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

  After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

  Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

  Please advise and help understand me what the problem is with the laptop.

  Until we start discussion can you tell me what you do when this happen?
  Hard stop and restart?
  Is everything OK again when you do?

  It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

  What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

• Motorcycle G screen becomes black and white, the names of the app

  Hello my motorcycle g screen becomes black and freezes, and also most of the time like every day my phone will be white all app names is there a way to get rid of this problem?

  Maybe you met the problem described here. Using a different pitcher like Launcher Nova should help. The update which should improve as well.

  See you soon,.

  Nicole

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler.

  When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler. And the only way to resolve the pbobleme temporarily to stop temporarily the computer weighing on the button of the tower.

  Hi Louis,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer

  Original title: freezes

  Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer.  now the Bureau is milky and freezes from time to time.  whenever the circle of 'thought' continues to 'think' without success.  Sometimes it fades, but most of the time I have to stop and restart.

  Hello

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  Try to start in safe mode and check if you are able to stop normally. To start in safe mode follow the link given below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2:

  Also, try to optimize the performance of Windows 7. Follow the link below which evokes the different ways to optimize the operating system.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• screen become white

  Hello, I have a laptop of HP G60 - 443CL and running windows 7. My screen become white at different positions that it is open. I can get the screen to stay when I opened it all the way. At the time it will start blinking and then turn white, and I have to continue to play with the position of the screen so he can stay on. IM wondering if I need a new screen or if it has something to do with the video

  It sounds like a bad connection. You must have your portable inspected. It is always in the period of guarantee?

  You can check that it is not the video solution by connecting an external monitor to see if the problem is replicated. I think that it is probably not the case.

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• C855-13D satellite after 5 minutes, my screen becomes dim

  Can someone help me please?
  I use a laptop Toshiba Satellite C855-13D with 64-bit Windows 7.

  After 5 minutes, my screen becomes dim unless I move the mouse.
  In order to disable this I need to go into the Advanced mode in eco service department.

  But on my laptop there is no Advanced tab. I've got report and help settings.
  No advanced. I went on YouTube and saw the Advanced tab there.

  So why missing on my laptop and how can I get it back?

  Hi demoome

  I think that the ECO profile has been selected in Win 7 power Managemnt.

  You can change it easily.
  Go to control panel (change the icon display, small or large)-> power management
  Here you will find plans of different powers.

  Choose the one you want to use: for example the balance.
  Now, click on change Plan settings

  Now, you can find the option called the brightness
  Here, you can assign the value of the battery and AC adapter mode.
  Finally, apply the changes.
  All that s

  Here's a nice video of Microsoft
  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

• Satellite 1800 screen becomes extremely dark

  Help this is my second Toshiba with this problem, the screen becomes extremely dark and after a few times it sometimes is normal.

  I agree with Askuma, but you shouldn't t by yourself.

  An ASP (authorized service provider) has certified technicians and they will help you and that you can order a new replacement part, if necessary.

• HP4240 printer scanner will not scan (says USB not connected) also cannot print attachments in emails

  1. an email has been sent with an attachment in PDF format, but I couldn't print it.

  2. I tried to scan a document and then join an email but the scan says USB not connected. The printer will print however

  Hello

  1. what operating system is installed on the computer?

  2. are you able to print or scan from other applications/program?

  Method 1: I suggest you try the procedure described in the below mentioned link and check if it helps.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: If the problem is not resolved, you can download the latest driver from the website link mentioned below manufacturer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=457003&lang=en&cc=us&prodTypeId=18972&prodSeriesId=456989&TaskID=135

  Hope this information is useful.

• computer is not allow to download a program on protected site, the "ongoing security scan" saying guard?

  computer is not allow to download a program on protected site, the "ongoing security scan" saying guard?

  Try temporarily disabling your Antivirus utility and try the download again.

  If you are running Microsoft Security Essentials, try disabling the real-time analysis and try the download again.

  Open Microsoft Security Essentials

  Go to settings, select "real-time protection".

  Uncheck the box and click on save changes.

• my windows vista begins to turn blue every 5 minutes, when it restarts, the logo screen becomes blurry

  When I turn on my windows vista computer, all right. Then after 5 minutes the 'blue screen of death"is displayed, when the computer restarts, logo startup screen goes fuzzy and it remains on this page (the logo screen) blurred for hours.  After a day or 2 when I try to turn on the computer, on the entire process starts again (fine for 5 minutes, then it goes weird) what's the matter with him?

  Hello

  Use Safe Mode to try to troubleshoot - repeatedly press F8 when you start.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Whenever I try to download, I get a Security Scan: saying can not download.

  Original title: Windows 10

  I tried to upgrade to Windows 10. And every time I try to download, I get a Security Scan: saying can not download. Test system to come up with a reason then restarts. Any help would be a great help.

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).