Screen/monitor problem

Similar Questions

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• How can I change the color of 8-bit to 16-bit on a screen monitor color flat viewsonic va702b

  How can I change the color of 8-bit to 16-bit on a screen monitor color flat viewsonic va702b

  Right click on some empty your desktop > properties > settings

  I hope this helps.

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• screen monitor flat kogi only allows me to use generic drivers

  original title: HELP ME IM GOING INSANE W T F!

  I have a pavilion hp 500 and trying to use a screen monitor flat kogi but it let me download the generic drivers and wont let me use the computer factory drivers if it means that I can not use this form. ? cause wen I download the original of this computer for graphics drivers, it gives me some vga and then it goes and does the thing oversized screen mode and gos blank and I go to safe mode and remove the drivers and the more generic Siu, but it limits my consumption of things I can do now... ANY IDEAS ON THIS ONE. !!!

  most of the time, the monitors are plug-n-play.

  a generic vga driver should be enough to run it

  But if not, then the monitor must be returned for credit.

  looking at a few reviews on this brand of monitor, it is not very good, and amazon don't sell any more...

  and if make you it work, if would probably go bad after three months.

  in all cases, by what your hp system is up to date with the HP drivers and software from hp.com.

• screen reader problems

  When you open the Yahoo home page, we get a distorted display. At the top it says problems screen reader, with line click on "disable auto updated pages" I click on it and most of the time that it takes me to a good Yahoo home page screen. Problem though is that I have to do it every time. I have lost the ability to get a good Yahoo homepage screen and forced to work to do every time I open Yahoo.

  I'm not sharing my information or be shared I know.

  How can I fix this please?

  Yahoo questions, ask Yahoo Tech Support.

  Here: http://help.yahoo.com/l/us/yahoo/search/

  http://en.Wikipedia.org/wiki/Screen_reader

  A simple search help and Support produced this one.

  Internet Explorer features, such as multimedia or page transitions, can cause screen readers to give confusing or incorrect information. Follow the steps below to disable the features that might interfere with screen readers.

  To make Internet Explorer work better with screen readers

  1. Click to open Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the Advanced tab.

  4. Make one or more of the following changes:

     • Place the cursor to follow the development of the screen

       If you want your screen reader or your magnifying glass to use the cursor (also referred to as theinsertion point or system caret) to determine whether to read or expand, follow these steps:

       Under accessibility, select move the slider system according to focus/selection box.

     • The text to display in place of the images

       Under accessibility, select him always expand Alt text for images of the box. UnderMultimedia, clear the show picture check box.

     • Stop page transitions causing erratic behavior in your player screen or voice recognition

       Under browsing, clear the Enable page transitions you use smooth scrolling check boxes.

       Under multimedia, clear the show picture and game animations in the checkboxes of the Web pages.

     • Help prevent the sounds of the Web page to interfere with your screen reader.

       Under multimedia, clear sounds in webpages box.

  5. Click OK.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Monitor/screen resolution problem

  Hi, my work PC runs Windows XP Embedded.

  It has a Fujitsu LL3200T LCD monitor connected to a graphics SiS Mirage 741 adapter 20 ".
  When I change the resolution under properties of the view to something higher to 1024 x 786 screen resolution changes, but not the resolution of the monitor, that is the monitor still displays at 1024 x 786 and displays a portion of any resolution, I changed it to.
  I checked and the monitor is able to display up to 1600 x 900.
  I uninstalled and reinstalled the latest drivers for the monitor and the graphics card but the problem persists.
  Any Suggestions?

  Hi Kerushan,

  This problem would be better suited in the MSDN forums.

  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/home

  Thank you.

• We recently had to reinstall the operating system on our computer, now, there is purple dots on our screen. Is this a problem computer or a monitor problem?

  We have a Dell Dimension E521and Dell monitor using NVIDIA drivers.

  Hello

  I suggest to update your graphics driver using Windows Update or download the driver for the Dell Web or NVIDIA site.

  This problem may be due to graphics driver or overheating.

  I hope this helps.

• Problem with black screening monitor

  My computer has started doing a few days ago, but whenever I play a game on my computer, it cut for a second put name brand monitors for a few seconds and then goes back to where he was. He did not stay in 4-5 years I got so far. Anyone know anything that can solve this problem?

  Hello Gavin,

  Thank you for your quick reply and for the information.

  I suggest that you check you connection VGA cable with the monitor as it could be faulty or loosely plugged in.

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Problem by dragging the PS window to the 2nd screen/monitor

  I have a MacBook Pro which is 10.10.5 and Yosemite.  I have a 2nd monitor is an ASUS.  I had been their mirror so far, but due to calibration problems, I do is no longer that.  How can I drag Photoshop CC on the 2nd monitor?  I have my put monitors in place on the Mac preferences they are upstairs and downstairs.  I drag my programs to my ASUS but PS does not allow me to drag the program.  I tried to open another window in PS.  I tried read but can't seem to get it.  Any help is appreciated!

  Try to disable multiple monitors or commit ' mirroring '. The enforcement framework will be then jump under the menu bar. See OS x: how to use several displays with your Mac in Lion mountain and even before - Apple Support

  

  ~ Assani

• Black screen / display problems

  I have a MBPR13"(early 2015) which I think has integrated graphics intel 6100.

  I've been running windows via bootcamp on the mac since I bought it, first with win8.1 and for a year or two, win10. A couple of weeks, however, windows crashed and wouldn't start. I can boot into safe mode after 3 failed attempts at normal mode, but I couldn't diagnose the problem. I took the opportunity to carry out a complete new installation of OSX and Windows 10.

  However, while OSX continues to work very well, Windows 10 still will not work. It installs successfully, and then gets to the point where the wizard Bootcamp installs all the drivers - it seems to be ok until that display then goes off - I guess that's the point where the display drivers are installed. Windows is still underway, but all I get is a white screen.

  After much mucking to plug and unplug the screens I can sometimes get an image on an external monitor or on the built-in screen. The computer screen does not fill the screen (bottom 25% of the screen remains empty) and windows cannot detect both screens at the same time. In any case, in a few seconds to lift an image on the screen, windows crashes and restarts.

  I suspect that it is a driver problem, probably related to a recent windows update - note my new installation is based on the current windows (as of today ' hui) 10 ISO download available from microsoft, so I guess this includes all applicable updates and I have no way to drive to a previous version.

  Can someone from apple what comments can you do on this point, hopefully identify that it's just a driver problem and update the bootcamp windows software support for my MBP so I can get Windows successfully facing up and running? Otherwise, any other suggestions on a fix?

  Thanks in advance

  Mike

  Updated - uninstall the display driver Intel 6100 temporarily solves the problem (of a point - the works of laptop display once again, but of course without hardware acceleration or connectivity external monitor), although 10 windows automatically reinstalls the drivers a few seconds later, resulting in the return of the issue.

  I was able to continue to use the laptop only by disabling the graphics card. However this clearly is not a solution, but simply points to the fact that the display driver is the issue.

  Everything apple comments? Surely, this affects a lot of users and not just me? Is an update to the driver on the way?

• Show only in the middle of the wide screen monitor webites

  I have a 25 inch wide HP - LCD HD monitor, since installation, Firefox AND Google Chrome only display the page in the center of the screen all scrunched up, there is nothing on both sides of the screen but the white color of the Web page I'm on (including this page), this only happens in Firefox and Google Chrome, Internet Explorer (which I can't stand) shown in the image on the screen in the same way it would on one normal monitor 19 inches

  I tried full screen and it does not fix the problem at all, it is remove the address bar and menu and the image is still in the middle of the screen just crumpled, the attached image shows what look like most all web pages (the image displayed is the page I am currently able to post my question as I just took a screenshot) , on the only page that seems normal is each page in Internet Explorer, the pages I visit in Firefox and Google Chrome, like eBay, Craigslist and any forum I'm going, looks like the attached image, once, this happens only in Firefox and Google Chrome, I just (yesterday) was installing a reformat full and fresh, Windows 7 Professional 64 bit and SP1 , it's the same problem that I had before the reformatting and the new facility, it's the 36.0.1 Firefox Version and he said its updated, I tried all settings, including zoom and text zoom, with he does nothing to broadcast the image on the screen as it is MUST

  Any help would be appreciated... Thank you... Jim

  Well for some reason, I just reinstalled the video drivers after reformat, I did a few days ago, the pages seem to be more normal looking, when I click on images that they are not distorted, so I have no idea as to why pilots have nothing before, but this time worked

  In any case, so far it seems to work as it should, and I have a more or less complete vision