Black screen / display problems

I have a MBPR13"(early 2015) which I think has integrated graphics intel 6100.

I've been running windows via bootcamp on the mac since I bought it, first with win8.1 and for a year or two, win10. A couple of weeks, however, windows crashed and wouldn't start. I can boot into safe mode after 3 failed attempts at normal mode, but I couldn't diagnose the problem. I took the opportunity to carry out a complete new installation of OSX and Windows 10.

However, while OSX continues to work very well, Windows 10 still will not work. It installs successfully, and then gets to the point where the wizard Bootcamp installs all the drivers - it seems to be ok until that display then goes off - I guess that's the point where the display drivers are installed. Windows is still underway, but all I get is a white screen.

After much mucking to plug and unplug the screens I can sometimes get an image on an external monitor or on the built-in screen. The computer screen does not fill the screen (bottom 25% of the screen remains empty) and windows cannot detect both screens at the same time. In any case, in a few seconds to lift an image on the screen, windows crashes and restarts.

I suspect that it is a driver problem, probably related to a recent windows update - note my new installation is based on the current windows (as of today ' hui) 10 ISO download available from microsoft, so I guess this includes all applicable updates and I have no way to drive to a previous version.

Can someone from apple what comments can you do on this point, hopefully identify that it's just a driver problem and update the bootcamp windows software support for my MBP so I can get Windows successfully facing up and running? Otherwise, any other suggestions on a fix?

Thanks in advance

Mike

Updated - uninstall the display driver Intel 6100 temporarily solves the problem (of a point - the works of laptop display once again, but of course without hardware acceleration or connectivity external monitor), although 10 windows automatically reinstalls the drivers a few seconds later, resulting in the return of the issue.

I was able to continue to use the laptop only by disabling the graphics card. However this clearly is not a solution, but simply points to the fact that the display driver is the issue.

Everything apple comments? Surely, this affects a lot of users and not just me? Is an update to the driver on the way?

Tags: Windows Software

Similar Questions

  • Screen display problem. See below for details. Impossible to get original Windows display fills it fullscreen display.

    My laptop closed spontaneously mode 256 colors and the "battery".  When I tried to turn it on again it would not respond.  I ended up using Ctrl-Alt-Del to stop it completely.  When I turned the computer back on it gave me a message on the "color mode" bubble and the screen looked "not normal."  I clicked on the bubble who said it would be 'restore' or something to that effect to the screen.  When he finished, I had a smaller screen display large icons.  Then I went into Control Panel and tried to get back to my original windows desktop and after much research, etc. have a "smaller version" of a desktop with the margins side black (approximately 1 inch wide).  I can't my screen fills the entire screen, regardless of what I do.  The option "stretch" in advanced settings is not the case.  What can I do?

    Hello Onthesea,

    Thank you for your message.  First, go to your computer manufacturer's website and download/install the latest video driver for your computer.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Get a black screen display during the installation of the center of Catlyst ATI in Windows 8 Pro

    HP Pavilion dv6t-3100 CTO Entertainment Notebook PC Serial number (S/N): product number [personal information deleted] (P/N): ww142av of operating system: Microsoft Windows 8 Pro (64-bit)

    Get dipslay black screen when I tried to install the latest ATI Catalyst Center (ATI CCC) in my laptop. After restarting my laptop too, I get the same screen for balck disply.

    When I was in Windows 7 Home Premimum I am able to swicth the ATI to Intel grsphics display option. After upgrding to Windows 8 PRo that I am faced with this display problem. Is this related to the software HP power manager or even in connection with the question of compatibility Windows 8 PRo.

    Please help me to solve this problem as soon as POSSIBLE.

    Click with the right button on amd drivers and click on update driver. After "Browse my computer for driver software" => 'Let Me pick from a list of drivers on my computer'-online 'have disk... '. "and stick to the location of W76A_INF.

    And have you tested uninstall intel hd graphics card before you install amd?

    Well, I really prefer to install drivers leshcatlabs instead, they are more up-to-date drivers.

  • Satellite M40X Screen Display problem

    My Satellite M40X has a black vertical line which occupies 20% of the screen on the left side. The rest of the screen shows a full view. Change the display settings makes no difference, and there is no mention of this error in the manual. You don't know whether a problem with the LCD screen or a problem with the adapter and drivers. Wanted to check if someone has experienced something similar and can advise you.

    Hello

    Check using an external monitor.

    If the same vertical line would be seen on the external monitor, an internal graphics card problem may be possible
    In this case replace the defective

    Since the GPU is a part of the mobo, you need to replace the motherboard that can be a costly affair

  • Satellite L670D-13F 17.3 inch laptop - screen display problems

    Hello.

    I got my Satellite for nearly a year, and in recent weeks, the screen has been compromised. Turquoise/Blue thin line across something are white or tinted white. I hope it's nothing related to the virus, as I installed McAffee.

    Any ideas what this could be? Is this a known issue?

    Thank you.

    Hello

    According to your description, a thin line appears on the screen. Right?
    Well, I doubt that this issue has something to do with the software or virus
    It seems that the problem of material: I m thinking display or graphics card problem.

    Connect an external monitor to the computer and check if the same think that the line would be available on the 2nd monitor.
    If this will not appear on the external monitor then it would mean that only the internal display is affected.

  • T61 button on-screen display problems

    Hello, I had a problem with my T61 and I was wondering if someone here could help me. My laptop recently crashed, having the blue screen on startup, what reinstall me Windows Vista again and everything. I managed to recover all my files and everything seems to be back to normal with the exception of a few things. First thing that annoys me the most is that whenever I use my volume buttons on the keyboard, the volume up and down works but does not appear in green text, as before, say what volume number. In addition, my silence affects only the volume mute but not to reactivate the volume later. As the top and down the volume buttons, shortcut keys Fn + Home and Fn + end to increase or decrease the brightness of the screen work, but do not display the text on the green screen. Another problem I have is that my blue ThinkVantage button next to the volume buttons does nothing. Finally, my biggest battery icon appearing any more in the toolbar to the left of the clock and icons of small image next to the clock. I hope that these problems can be solved through these forums and I thank very you much for your help!

    Sweet, I got it fixed. I thought I ran an update of the system already but obviously not. Thanks for your help!

  • 9860 screen display problem

    I have an application in OS 4.5 which works well in all the OS versions up to 7.0... But I am facing a problem of alignment strange screen only device 9860, which is a pure touch device...

    The keyboard is always on and my application is displayed in a very small area in the Center, although I use setExtent to use the entire screen...

    Can someone help me!

    I think you've hit the old problem of "compatibility".  This allows to occur when applications were compiled in pre OS 4.7 and then run on OS 4.7 (storm devices).

    If you go to the properties of the Application I think you leave compatibility.

    You can just recompile you app OS 4.7 or higher and use this for all devices that you have OS 4.7 >.  Stick with the 4.6 OS updated version for other devices.

  • Laptop HP Pavilion dv7t after connection then blue screen display problem

    My phone displays the Windows 7 login screen very well.

    After I login, I see the desktop and icon and it flashes a couple times with a gray screen.

    Next, I get a blue screen and restart the computer.

    Any ideas?

    Hello

    The fact that it works well in Safe Mode, more points to a problem with the video chip.  Unfortunately the video card (called a card or a built-in chip) is physically soldered to the motherboard.

    That's what I would recommend.

    As you can access the safemode, make a copy of backup all your important files, etc.  Then try to reinstall the operating system or your discs recovery or Partition of HARD drive - if you still have the same problem, you could be quite certain that it is not software partner.  As I mentioned earlier, if you could possibly connect the laptop to an external display and you still get this problem, you could then be confident that the problem is with the video card - in this case, see the link below.  The page does not mention your particular model, but it can be useful in communicating with the guys.

    http://CGI.eBay.com/HP-DV2000-dv6000-DV9000-tx1000-laptop-no-video-repair-/260674058980?PT=LH_DefaultDomain_0&hash=item3cb1627ae4

    Kind regards

    DP - K

  • HP Pavilion DV6-6031eo - black screen (backlight problem)

    I ve bought a new laptop Pavilion DV6-6031eo 2 weeks ago, and it worked fine until today.

    The question:

    When I turn on the laptop, it starts as usual and the system works perfectly, but the screen is black, so I can´t use it, unless you use another monitor, think I Don t want to. I think it has something to do with the backlight, or perhaps the retroeclairages cable routes.
    HP logo at the back of my screen used to light up when I turned on my laptop, but now it s too messed up.

    No backlight and no light in the HP logo.

    I ve sent an email to HP TotalCare, since I got my warranty (lasts 1 year) and I would like to know if they will cover it.

    Hopefully, I will get a response as soon as possible.

    Thank you.

    PS: Sorry for my bad English. I m of the Denmark, so it s not my mother tongue.

    Hello

    Guaranteed that you have on this model it will cover for you and your English is very good.

  • Adobe Creative Cloud desktop screen display problem

    Does anyone have problems after the Creative Cloud Desktop () lights out after the last update?

    Check the version of the worm had to file (Adobe Desktop Service.exe) is 3.3.0.151

    ACC_screen.png

    Through the Release Notes connect you and found a cause what the problem

    When you look at the note accompanying this week

    Using creative cloud | Creative Office Cloud app | Release notes

    Version 2.3.0.151 released on 24/09/2015

    • This update brings considerable improvements in the installation experience:

      • Processes which are in conflict with the installation of the products are displayed before the download starts. In addition, notifications about the contradictory processes are much more useful.
      • Installation and download acrobat DC is improved to support already installed versions of Acrobat.
    • If you change your subscription, the creative Office Cloud app now shows your current state of the law for each application.
    • HiDPI support on Windows was added.<-believe this="" is="" what="" cause="" the="">
    • Integrity of the Adobe Service software is built into this update.
    • Other bug fixes.

    and I can currently temperley work round the issue of disable support high DPI in the window

  • screen display problem?

    my screen has a box in the upper left corner, more brilliant than the rest of the screen.  Troubleshooting unresponsive. Help, please

    Hello

    I suggest you to refer to this link and check if it helps:

    http://support.Microsoft.com/kb/307960

    It will be useful.

  • HP Pavilion G6: black screen

    Hello
    About half an hour, there is, I restarted my computer, it started as it should and the login screen was visible. I logged in one or two of my accounts and then it started loading process. After a few seconds (maybe 20) loading, the screen goes black and my office is not accessible. I am able to CTRL ALT DEL and access my task manager. I would also like to point out once I click on restart the computer on the screen CTRL ALT DEL, for a brief moment before the computer stops my desk is visible.

    I don't know what could be the issue. I tried hard reset/disconnect and remove the battery but it doesn't seem to work. I checked the second account and it still happens. Please can someone help as soon as POSSIBLE because I need this laptop for work. Thank you

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

    If the above is not correct the problem, try to run the steps in the link below.

    http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

    Kind regards

    DP - K

  • black screen on hp

    Hi, I turn on my laptop and open a session and then the screen goes black. I tried the ESC F10 key. In fact almost every button I could think. Please help really need my laptop for work.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

    If the above is not correct the problem, try to run the steps in the link below.

    http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

    Kind regards

    DP - K

  • Black Screen HP G62-b16st and ati radeon hd 5470

    Hi, I have a problem with my laptop (Hp g62 - b16st) I use this laptop for 2011 and I didn't have any complain so far, but 3 days ago when I played PES 2013 he suddenly restarted then blue screen name appeared. I did some research on google about this problem and I see no useful solution. My problem is on Ati Radeon Hd 5470. When I switch to Ati Radeon I see just black screen and if I don't disable it in safe mode it keep black screen display. I tried everything to fix it, but nothing happened.  I hope you can help me because I couldn't find the solution by myself.

    BIOS version: F48

    Win7 Home Basic x 64 bit

    Hi uAunknown, welcome to the Forums of HP. I hope that the blue screen and screen black behavior you are experiencing is pilot-related and not related material.  First restore the original graphics drivers (Intel & AMD) using this method: use of the Recovery Manager to restore the software and drivers (Windows 7)

    Then, download and install the drivers updated here:

    High definition (HD) of Intel Graphics Driver
    AMD HD graphics driver

  • black screen at startup and even on HDMI

    My hp pavilion dv7 gives me a black screen at startup and even if it is connected to my HDTV via HDMI. have tried several methods but still not working (the battery grip and long pressing the power button and then using the AC adapter to turn on). Can someone help me solve the problem please.

    Yances,

    Welcome to the forum.

    Have a look here:

    Provides the steps necessary to test the memory and the hard drive and restore the operating system if the laptop does not start and no error message is displayed.

    HP Notebook PC - troubleshooting black screen displays with no error message during startup or boot

    The next document implies that the system provides an Error Message:

    HP Notebook PC - troubleshooting on a black screen error Messages that may occur during Startup or start-up

Maybe you are looking for