Screen saver starts to turn, or screen turns white & we crazy!

No matter what I have the screen saver setting is on my Dell Studio laptop, the computer seems to go in the screen saver in about 4-5 minutes. Even when the setting is set to: NONE, the computer will still screen white/black. I checked and reset for computer & monitor and monitor power settings is set to 'Never' turn it off. I usually screen set to screen saver 'empty' is not using any mobile video action animated on the screen.

This started happening over a few months, if not so fixed in 10 minutes or 15 minutes, or even screen saver of 60 minutes affecting the computer used for the operation of standby screen impeccable. All the time he began to have problems with screen saver "wallpaper" background is had on desktop would be replaced with the default Windows and background when first start upward or just before closing down-stop, is the issue of wallpaper for only 1 to 2 seconds.

Anyone has any ideas what could be my challenge to laptops? Thanks for all the ideas and intuitions. Try to take classes online and the registration of classroom sessions are a challenge when the screen becomes black and white every 4-5 minutes without pressing any key or move the mouse every minute of couple. / dk

Hello

 

I suggest you to check the boot issue.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: Please don't follow step No 7 the link above to restore the computer to a normal startup.

Tags: Windows

Similar Questions

  • What do you do when the screen starts to turn upside

    What do you do when the screen starts to turn upside

    Hello

    Please try this (Windows 7)

    Press the keys Ctrl and Alt at the same time then the arrow key press upwards (or downwards).

    Or fix this way

    • Right-click on an empty distinguished on desktop
    • Select Customize
    • Select display
    • Select change display settings
    • Do not use returned to the Orientation box.
    • Click OK/apply

    Kind regards.

  • BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

    A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

    You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

  • iMac screen just turns white

    my iMac screen went white. I turn it on and have nothing else than a white screen. Y at - it shortcuts keys for a difficult stop for these devices? Or does anyone have a real success for this scenario?

    Hold the power button until it stops. The attempt of a PRAM reset according to the directives of the iMac SMC and reset the PRAM. If the computer does not start, try to restart in the recovery actually now Partition command + R to start. If that fails, take the machine to your local Apple Store or Service Center authorized Apple repair.

    In addition, you happen to have ANY antivirus, cleaning or ANY other maintenance applications third party installed?

  • MacBook Pro screen turned white rose areas

    I use a Macbook 2009 end Pro 15 ", 4 GB of ram, 2.8 GHz Intel Core 2 Duo. Everything is fully updated. Yesterday, I started getting intermittent flashes of rose on the white areas of the screen. Affected programs were Pages (old and new versions), Safari, Mail, numbers and Quickverse. I have tried a reboot and everything seemed fine, but he reappeared briefly to the waking from sleep.

    Today the same programmes on each screen, including white ares of my desktop image. I can read the material, but it's distracting. The best way I can describe the pink areas are thin vertical lines as fabric. The area directly below the words is mainly white.

    I searched the forums and tried to reset the Pram and go through all the steps for the MSC. I started using the safe, but the rose remained. I ran the disc with no found error utilities. I tried to run the apple hardware test, but nothing happened. [The instructions said close then turn on by holding down the button D. I tried 3 times, but the icon never appeared].

    I also tried 8 Tech tool for video and nothing was found.

    The Apple store nearest is 3 hours away if I'd rather solve this problem without going there.

    The Apple store nearest is 3 hours away if I'd rather solve this problem without going there.

    You did all the good troubleshooting-

    You have a hardware problem.

    GPU, cable, cable connection, LCD or LED

    In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test and ask specifically for the VST (video systems Test)

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • HP 15-R006TU: computer HP laptop 15-R006TU left half of the screen has turned white

    I turned my HP 15-R006TU laptop to Hibernate mode before going to sleep last night. Today morning when I turned it on half of the screen was white with a few lines inside. All software and operating system works very well. Its like it has a white cover on the left side of the screen. I can't access start menu because it is on the left side of the screen.

    I turned off my laptop and unplugged the adapter, then turned on again, but it remains the same. I have not changed the drivers or anything recently. I have windows 7 ultimate 64 bit and I use the dongle Auntie Photon Max for internet. My laptop is only 2 years. I don't have anything I can remember damage the laptop and, finally, I used it, everything was fine.

    What should I do?  How to solve this problem? Virus for this or is - this display problem?

    P.S. I noticed the left hinge connecting the screen with a keyboard part is a little loose... And screen resolution is affected is I move the screen

    PLEASE HELP ME...

    It's the material. Can you connect to an external monitor? If the output is OK outside then we have reduced to a bad display cable or a bad screen. Much more likely the latter.

    You have the 15.6-inch 1366 x 768 screen, which is the most common type. Very cheap and replacing the screen is easier than you think. We will also need to assess the problem of screen hinge and eventually replace the hinge.

    After return with the country you live so interested to continue repair of mutual assistance. We can you link to a video and you will help to find the part.

  • Want 1 7 screen turns white

    I bought this Envy 17 3D in December 2010 of HP Websight. The model is WY771AV and running Windows 7 with 1080 p and uses 5875 A M D graphics.  The last 30 days @ initialize to top the screen will turn white United when I try to start. All I can do is push the switch down to be able to try again. 9 0% of the time, new attempt fails (does the same thing), but sometimes I can go to the Startup Repair, run system restore and use the machine for 2 or 3 times before the next exit white. Help? Please tell me what hdwe plot fails so I can replace it.

    Solved thanks for the suggestion! I used an HDMI cable to a TV and downloaded the latest AMD graphics driver from the HP Web site. Once finished downloading the file, my screen is is relit and worked fine since. Thank you once again!

  • Restart computer, windows xp screen came then the screen turned white

    Restart computer, windows xp screen came then the screen turned white

    Hello

    1. have you made changes on the computer recently?
    2. do you get an error at startup of the computer?

    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • Re: NB200 - making noise and the screen turns white

    Hello

    My laptop makes the high pitched noise and the screen turns white. Please help with this question.

    Thank you

    Hello

    It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

    Welcome them

  • Satellite L300 PSLBGE screen turns white after a while.

    I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
    I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

    sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

    Please help for this problem

    Post edited by: bharatjaiswal5

    Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
    In my opinion you should try it because it could be a problem in the system.

    Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

  • Satellite A20 - screen begins to turn white

    So I'm having a problem where my pc screen begins to turn white unless pressure is applied on the lower rear of the monitor. As I was typing this message, the screen has managed to stay sane by himself for a while, but then returned, so I think it mya be any hope for her.

    Any help will be useful, thank you advance.

    Hi IBE876,
    What a Pseudo ;-)
    It looks like problems with the lcd screen.
    to me it looks loke a defective cable and / or a bad inverter.
    do not open the cover of the display until you know what you're doing and you have no guarantee on this machine more...
    This inverter is a dangerous thing! It produces a high for the lighttube voltage.
    If it is still warranty on this unit, better consult a servicepartner, there also the spareparts right...
    If you want to do it by yourself... Keep in mind, it can be dangerous!
    Make sure no powersource is connected to your system and battery is taken out.
    Maybe it could be a loose cable...

  • When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

    HELP me get my E mail.

    When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

    http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

    Hello

    1. what operating system do you use?

    2. What mail client do you use?

    3. you have made any changes to your

    4. what site you're talking about?

    5. How do you access the webpage?

    6. you use Internet explorer or another browser to access the site?

    The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

    Are you referring to http://www.bee.pl/index

    Refer to the following, who says that the sites host malware

    http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

  • 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

    Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

    Hi danny61,

    Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

    If you can update me if I can see how I can help

  • When trying to view videos full screen, the screen turns white!

    When I try to watch videos, I love to watch full-screen, but when I press the icon full screen the screen turns white. I have to press the ESC key to return to normal. What will fix this?

    i right click on video > select settings > remove the check mark from material

    Acceleration.
     
    II] download and install: -.
    Adobe flash player: -.
     
    III] update your graphics card driver on the website of the manufacturer of the graphics card.
  • P2412H - displayed briefly and then the screen turns white.

    Hello

    I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

    This morning one of them has failed - it displays briefly, then the screen turns white.

    Manual test:

    1 unplugged every wire and power button which is held for 15 seconds.

    2 reconnect the power cord.

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    3. press one of the control buttons

    -Nothing happens

    4. disconnect the monitor

    5. connect the monitor to on PC with Windows connected using DVI.

    6. connect the power cord

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

    The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

    Can anyone help or point me in the right direction on how to fix it?

    Thank you

    * UPDATE *.

    Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

    cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

    Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

    Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

    Back together carefully.

    Backwards and now it works very well for 48 hours.

Maybe you are looking for