Screen sharing, FileVault, and reboot

Similar Questions

• Windows 7 blue screens after connection and reboots

  Hello

  I had a problem with windows 7 lately. It is more than an annoyance rather than a real problem, but after I connect to windows, my PC will be blue screen, to restart, go to the black screen where I can choose to start windows normally or in mode without failure and when I log in, everything will be fine (I'll have a little message saying that windows has detected an unexpected shutdown, but that's all).

  I have a custom built PC, here are my details:

  GPU: Gigabyte GTX 660

  CPU: AMD FX-6350

  Motherboard: ASUS M5A97 r2.0

  Hard drive: Western Digital Blue 1 TB

  RAM: 8 GB

  I use a USB keyboard and USB mouse (also well connected in USB 2.0 slots), a configuration double monitor (the two are from different manufacturers, one from dell, the other from Asus) and a USB headset (plugged in the back of my PC into the USB 2.0 Ports)

  Any suggestions on how to fix it?

  Thank you!

  We have two coherent bug checks:

  NTFS_FILE_SYSTEM (24)

  This indicates there was a problem in ntfs.sys, the driver file that allows the system to read and write on NTFS drives.

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.

  Error checking 24, { fffff8800970b0a8, fffff8800970a900, 1904fb, fffff880012d0d93}

  5: kd > .exr 0xfffff8800970b0a8
  ExceptionAddress: fffff880012d0d93 (Ntfs! NtfsFcbTableCompare + 0 0000000000000003 x)
  ExceptionCode: c0000005 (access violation)

  The violation occurred in NtfsFcbTableCompare.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff96000363196, fffff88007d15f70, 0}

  5: kd > fffff96000363196 ln
  (fffff960'00363110)   win32k! SFMLOGICALSURFACE::SetShape + 0 x 86 |  (fffff960'0036331 c) win32k! SFMLOGICALSURFACE::CreateHLSURFClone

  The exception is produced in win32k! SFMLOGICALSURFACE::SetShape.

  -----------------------

  1. I see Asus PC Probe as well as other Asus installed bloatware. Uninstall all Asus bloatware as soon as POSSIBLE.

  2 uninstall SuperAntiSpyware as soon as possible. as it is very probably originally file system conflicts.

  3. SSPORT.sys is listed and which is the Samsung printer driver. The driver is from 2005, which is too old to work with the operating system.

  Kind regards

  Patrick

• HP Deskjet D1520 - when you try to print, the blue of my computer screens and reboots.

  Have a new computer running 64-bit Windows 8.  After the blue screen error message and reboot is a memory dump.  Have reloaded drivers and run HP diagnostics and windows.  Two diagnostics say everything of fine, but I still can't print.  Sometimes a half page will print until reboot, and sometimes there is nothing to print.

  Try a different USB port on the computer

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• (Redirected) Precision M6500-white screen on startup and black screen on reboot

  Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

  1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

  2. the unit turns to the insertion of the battery.

  In order to isolate the root cause of these issues, I tried the following without success.

  1. replacement memory

  2. new display motherboard cable assembly

  3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

  Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

  The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

  Thank you

  engindigo

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Blue screen after update software and reboot

  original title: blue screen poops after n reboot software update!

  • Ive been using windows 7 for 6 months, bt shot I was updating my software after update so I was suppose 2 restart my pc because I so now I can't show a blue screen saying tht ive acsess to windows incorrectly install hardware or software... guyz so no solution? I can't reformat my pc because there are a lot of things in my hard drive... guyz plz I need a solution as soon as posible... hope 2 of you hear soon...

  Windows 7 - repair facility:
  http://www.SevenForums.com/tutorials/3413-repair-install.html
  "This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system."

  How to run a startup repair in Windows 7:
  http://www.SevenForums.com/tutorials/681-startup-repair.html
  "Startup Repair is a Windows 7 system recovery tool that can fix certain problems, such as missing or damaged system files (ex: boot MBR file), that could prevent Windows to start correctly."

  How to start on the System Recovery Options in Windows 7:
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html
  "The System Recovery Options menu is on the Windows 7 installation disc. If your computer (OEM) manufacturer has preinstalled the recovery options, the menu can also be installed on your hard drive as a recovery partition. »

  How to create a Windows 7 system repair disc:
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
  "That you will show how to create a Windows 7 system repair disc to use at startup in the system recovery options if you do not have a disk Windows installation, cannot find your Windows installation disc, or cannot access to the recovery options provided by your computer manufacturer."

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

  Hi guys,.

  I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

  I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

  CPU: AMD Phenom II X 4 955

  RAM: 16GB DDR3 Corsair

  GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

  My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

  Troubleshooting I executed before writing these lines:

  • Updated my nVidia drivers
  • Checked the themes and DWM Session Manager services, both started, both the Auto value
  • Ran the store built, the problem cannot be resolved
  • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

  So the GPU is not the problem, I've been running Aero until this problem has occurred.

  Any ideas?

  Thank you!

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

  You can follow the link to your question:

  The customers TechNet Lync and devices Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

• If I want to make a screen shared using video and graphics, programs Adobe would achieve this?

  If I want to make a screen shared using video and graphics, programs Adobe would achieve this?

  First Pro... Ask for details at http://forums.adobe.com/community/premiere/content

• Windows 8 and shift of screen sharing

  Is there a problem with Adobe Connect 9 and Windows 8 screen sharing?  I noticed there is a topic a lag 2secs or more when I share my screen in Windows 8.  that is if I open a window or anything, participants do not see the change up to 2 to 3 seconds later.

  I have excluded IE and Chrome because they both have the same problem.  I have also excluded the machine because if I run a virtual machine VM Ware with Windows 7 on the Windows 8 machine, then share the virtual Windows 7 machine screen, there is no lag.

  Good, well then you probably a network problem (congested network), may be looking for a performance of a computer problem, some conflict with Connect and another application on your computer causing the shift, or something else entirely. Are you able to share your screen without lag on another computer on the same network? If so, who will be captured to eliminating the network and reduce it to your computer.

  You can consider working with the Support from Adobe to see if they can help identify the problem as well. 800-945-9120.

  You can also try the test of your computer page to see if something happens there. You can replace the URL of the server for the system you are using, but for my account, that is: test meeting connection

• After 10.11.6 and 5.1.7 server OSX update no. Longer can connect via screen sharing

  I did the updates using screen sharing, now, screen sharing will not work. 2 servers, both with the same problems. I can connect to other computers on the network, not only servers.

  HI, I need a new internet browser, but I can not download from any website, I have had I have mac in early 2009

  10.7.5. can you help me... Sorry for my primitive English

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• Blue Screen error-Kernel_Data_Inpage - dups then black screen blinking cursor Diisk reboot

  I have a Windows XP - Home Edition. My personl computer Compaq is 12 years old.

  The system displays a blue screen with letering white, it is said Kernel_Data_ Inpage Error and also tells me to remove caching and shadowing in my BIOS menu. ???

  He said that if I recently installed new software or hardware to uninstall it to see if that helps.  I'm not as far as I know, execept one vershion editing ADOBE.  I also removed some software like PON Bars and an old vershion of JAVA /.

  I did a system restore, but it does not help, and now my Internet Explorer crashes too!   I have to keep manually close the market system and after that I get a black screen, which requires a Reboot disk, Windows finally arrives, but will eventually, and the schreen blue WARNING appears. He said also he made a DUMP to protect my computer and stop.

  Most of the things see you on a blue screen of death (BSOD) is generic boilerplate stuff you see on just about all BSOD.  What is important is the few lines that you see under the heading technical information - and sometimes it is not enough to understand what is happening.

  After trying the suggestions of the engaged Microsoft Support Engineer 'expert', someone who knows how XP works may be able to help understand what is happening if you provide information on your system and your system crash dump files.  I do not see how these things suggested will give you clues about what causes your BSOD, but they are the "experts".

  The following looks like a lot to do, but if you do the best you can with it, your question will be resolved more quickly than to try some things:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Please MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Your system seems to start OK and then crash or didn't he start not at all?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
  For information about video drivers, expand components, click display, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.

  It is sometimes easier just to download the memory dump files since your last breaks down on your SkyDrive (everyone has a SkyDrive for file sharing).   So can someone who already has Windows debugging tools to look at things and understand what is happening.

  Dump memory of recent crashes and BSOD files are usually in this folder (assuming that XP is installed on your C drive):

  c:\windows\minidump

  The files will be named something like this:

  Mini120311 - 01.dmp

  You need to download the latest... maybe 5-10 of the most recent crash dump files should be sufficient if you who have a lot.  If you do not have that much, send what you have.

  Getting started with SkyDrive:
  http://explore.live.com/SkyDrive-get-started

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:
  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

  While you wait, please follow these steps:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

• black screen at startup and after logging

  I have this problem for a few weeks.

  When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.
  But sometimes win xp load success and after I have connect it reappears, black screen.
  I tried to find a solution for this in google, but nothing helps, it makes me angry.
  She sucks can anyone help me on that I would appreciate it. Thank you!!!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• macOS Sierra problems with screen sharing

  Hello

  After update to Sierra in two of my Macs, I can´t use the screen sharing. I used to use my second computer using screen sharing, but now, whenever I connect I see the split screen but active areas for use on as sleep, restart and turn off keep its original position. This means that if I like the closing down of the remote computer, I need to press just left... really strange sleep.

  I'm trying to connect to remote VNC Android and the appearance of the screen split also and with the same problem.

  Anyone has the same problem or an idea how to fix?
  Thanks in advance!

  

  Solved!
  Omission of base: after the descent of the Sierra update on both computers, forgot I manually start the.app after the update to the same date (a few minutes before). This cause the problem.
  I launch the.app server run OK and no problem with screen sharing.
  Maybe not to repeat this mistake, but just in case it's useful, I leave my explanation.

  See you soon,.

• Function keys not working only not with screen sharing

  Sierra running on all machines. Until the update, I would use on iMac 2014 screen sharing to access a Mac Mini 2011. Everything worked very well. However, after update, function keys no longer work through screen sharing. I confirmed the screen sharing is the problem, as functions correctly with Mini bluetooth keyboard, and also logging since MacBook Air gives the same problem from the iMac. It wasn't a problem during execution of El Capitan or even when I used Sierra Beta on iMac.

  Anyone has any suggestions or has met this themselves?

  Have you tried using fn function keys?

  IE: fn + f2