HP Deskjet D1520 - when you try to print, the blue of my computer screens and reboots.

Similar Questions

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Download the blank Page when you try to print the Web page

  I have a HP8600 printer set up to print wireless, when I try to print a web page from my PC all that's prints a blank page.  I use Windows 7 with Internet Explorer 11.  If I copy the Web page to a word document it prints

  Hi there, have you tried HP Smart Print webpage printing solution?

  Best

• When you try to print the attachments I press on print and then OK, but get the message "file print".

  When I try to print an attachment, I press 'Print' and then 'OK' but then get the message @print ot file '. I thought that I would be able to print the attachment without having to do extra anthing.

  Hello

  ·         You want to print and whence? What application you are trying to print from?

  ·         Were you able to print before on the system?

  ·         What type of file you want to print?

  ·         Apart from that you can print from other applications?

  If you try to print a document from the internet then, I you suggest saving it to the desktop and then try to print and check if the problem persists.

  I suggest you return the article mentioned below, if you try to print from the internet explore.

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

• Error 80070652 occur when you try to install the update for microsoft works 9 and 2007 microsoft office suite Service Pack 2 - why?

  CONTINUE TO RECEIVE AN ERROR 80070652 CODE WHEN I TRY TO INSTALL THE UPDATES FROM THE WINDOW FOR MICROSOFT

  WORKS 9 AND 2007 MICROSOFT OFFICE SUITE SERVICE PACK 2 - WHY?

  Hi SonjaThibodeaux,

  ·         You are able to install all other updates without any problems?

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What are the KB numbers associated with the updates?

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• "Error message: out of memory". Save or close any files or applications"when you try to print the Works spreadsheet

  Original title: receive in Microsoft Works Spreadsheet click on print, I receive this message. "Out of memory. Save or close any files or applications "Whats wrong?"

  Same as above

  Hi dennyfer21,

  1. This only occur when you print the Works spreadsheet?

  You can read the following article and try the steps and check if it helps to solve the problem.

  "Not enough memory" error message when you print to the works

  http://support.Microsoft.com/kb/841220#appliesTo

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to open some sites Web my computer crashes and I get a message "a problem caused this program blocking interact with windows.

  Hello

  From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
  I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
  At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciated

  Original title: problems with Win7 and MozillaFirefox

  Hi Ulica,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.

  It would be great if you can answer these questions to help you further.

  1. is the question confined with Mozilla Firefox?

  2 are you able to access the same Web site using Internet Explorer?

  3. have you made changes on the computer before this problem?

  4 are you facing this problem while accessing the secure Web site?

  Problem with Internet Explorer, I would suggest trying the following methods and check.

  Method 1:

  I suggest you add this particular website as a trusted site and check.

  To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites

  Method 2:

  I suggest you to see the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Note: There are rather than Internet Explorer 9 as well.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID

  Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.

  http://support.Mozilla.org/en-us/questions

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Acrobat and Reader 8.  When you try to print, the memory could not be "read".

  A user (without local administrator rights) does a job batch of Microstation and exported all his drawings in pdf format.  They open correctly in Acrobat 8 and Reader 8.  When he clicks on the button print, it gets the error below.  When I login with local administrator rights, I can print these accurate pdfs very well.  Here is the event/error log entry.   Any help would be greatly appreciated.   It runs Windows XP SP3.

  Event type: Information

  Event source: Application Popup

  Event category: no

  Event ID: 26

  Date: 27/03/2012

  Time: 17:27:46

  User: n/a

  Computer:

  Description:

  Application popup: 2012-03-27 C6-01. PDF - Adobe Acrobat Professional: Acrobat.exe - Application error: the instruction at "0x0436959a" referenced memory at "0x00000d28". The memory could not be "read".

  Click OK to terminate the program

  Click on CANCEL to debug the program

  We tested with another nonadministrator account and Acrobat worked fine.  Therefore, the problem was in the user's profile.  We just its data saved, deleted the old profile and did reconnect.  This has created new profile.  Acrobat works beautifully.

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• C4580 on Macbook. Print the test and scans wireless but said network host is busy when you try to print.

  I installed everything and print a wireless test page. That works, scanning the wireless work. I can see print ink wireless levels but when I try to print the screen I get

  Host "xxx.xxx.x.xxx" network is busy. retrying in 30 seconds...

  But she does not ever print. I think it's just a matter of minor adjustment that anyone has any ideas?

  The test page does not use the computer (uggh) queue service, so often works with the spooler is hung up.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, you will need to tell me which version of Mac OS X you are using and where you got the HP software.

• Constant "paper jam" when you try to print photos

  Hi all

  I get constant "paper jam" error when you try to print photos on HP Premium Plus photo papers. I use 13 x 18 cm and A4 documents. I gave up a single sheet of A4 paper and printed the printer self-test report and it shuts everything OK.

  I already followed the instructions of rolls to power clean paper, but without effect (for example http://support.hp.com/us-en/document/c01123477

  I'm about to give up and look for service but the strange thing is that jams only when I try to print photos (for example from Lightroom) but is allowed when copies of documents or printing self-test report.

  Any advice here?

  Thank you

  Adam

  Hi MissTeriLynn,

  Troubleshooting instructions made me pick up the problem with Lightroom. I came across a statement "some other Adobe software users have reported conflicts with HP printers. They tend to have long names and a simple change of name of the printer, for example to something like desktop printer or MYPRINTER seems to work"(here).

  And guess what. It resolved my problem as well. I have configure most of the options of printed model but the printing again.

  Thank you very much for the support provided!

  See you soon,.

  Adam

• Error message when you try to print

  I received the following error message when you try to print a document.

  "Spooler subsystem App stopped working and was closed.  Production of Windows warn if the solution is available.

  I have not had any problems with my printer up to today.  How will I be notified by Windows and is there anything else I can do.

  Are you facing this problem when you print using all applications?

  Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.