screen showing the auto repair

Similar Questions

• My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.

  * Original title: look for the updates ms7

  My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.  Since 14 June I repeatedly ran checks the updates, but these controls are never successful as never - end research I just saw the "check updates" message, but the check never ends.   Why is this?

  The Windows Update client cannot manage a KB3161664. Download and install it manually in advance. Links provided here:

  http://Wu.krelay.de/en/

  Be sure to not do a search running in background.

  Best regards, VZ

• Even after the recovery window 8 is in the preparation of the auto repair loop

  My laptop MSI gs70, he keep remaining preparation auto repair. Only sometimes, I click on F3 will go to the recovery sysytem option, especially going to go prepare the AutoFix. For further troubleshooting, select refresh your pc, it displays the message, windows player is installed is locked. Unlock the drive, and then try again. To reset your pc, it displays unable to reset your computer. A required disk partition is missing. Go to advanced option, each of them do not work.

  Even if sometimes I enable System Recovery successfully, he picked up the system, he enters the office, then you reboot the laptop, it will return preparation auto repair. I have really no idea for it already. Please help me...

  Hi JIT,

  Please answer these questions to better understand the issue.

  1. What is the brand and model of the computer?
  2. Remember to make changes on the computer before the show?
  3. Do you have connected an external device to the computer?

  You may experience this problem if Windows 8 start files are missing or corrupt, try to remove all external devices connected to the computer except keyboard and mouse and see if you can boot to the desktop. I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you try to do a system restore to an earlier point of time before the problem occurred:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click Advanced options , and then click System Restore.

  (e) follow the on-screen instructions and check if it helps.

  Method 2:

  Auto repair and check. If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  Create an installation media for Windows

   http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select auto repair.

  Method 3:

  I suggest you follow these steps and try to solve the problem of Windows 8 start:

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  f. check if the problem persists.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Satellite C50D-B-120 in loop - preparation of the auto repair

  my laptop keeps going into a loop, when I turn it on it says 'Auto repair Preparation' then goes on a screen black for several hours without anything I tried to restore the disk hard taking 0 when turn, but it does exactly the same thing in a black screen. Any help?

  This could be caused by the bug of Windows 10.
  There are many different items on such behavior Windows 10 and probably this kind of issue should be fixed by Microsoft update.

  This is one of the items mentioned:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Yoga 11 rt stuck on the preparation of the auto repair

  Hi all
  My lenovo yoga 11 is blocked at startup (auto repair preparation) for a day now. I desperately need your help. This tablet is what links me with family and friends at home (abroad in Asia for 7 months and counting). I just he might walk, so if a reset is needed I'm oke with who. But please, explain to me how to perform the steps that I can't find useful information online.

  If someone could help me on this, that would be much appreciated. If more information is needed please ask and ill do my best to accommodate it! Thanks in advance to all, Tom

  Try the button nova its next to the power button its very small and if that has a repair option I, it is also the place to do a complete reset

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• XPS 12 stuck on the preparation of the auto repair

  Hey,.

  I have a huge problem with my new dell xps 12 boots go POST but to get stuck on loading windows logo or the preparation of auto repair. I don't know what to do anymore. I tried to boot from USB only legacy enabled it does not start. I'm trying to see if my DRE order can help, but I don't know if it is compatible with windows 8. I can't use F8 F2 and F12 to enterering of INSTALLATION and Startup Options.

  Help, please!

  All,

  I have a XPS 12 that was stuck on "automatic Preapring repair." I had put to sleep it and bought another, I recently met the old an and had a quick Google to see if something had changed! Of course, I came across this:

  

  I opened the XPS 12, reinstall the daughter (removed all connections and reconnected) card, turn on the laptop with a fresh install of Win 8.1 and it installed and everything seems good! He runs a Windows Update as I type!

  Worth a try? Give it a go!

  Good luck!

  Paul

• Windows 8 disc locked; It does not start at the home screen, will not auto repair and doesn't give me access to safe mode

  Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.

  Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.

  Simple repair that has worked for me.

  If you have a windows install disc (if you borrow 1 from a friend)

  run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,

  Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.

  Bootrec.exe

  Bootrec/fixmbr

  Bootrec.exe/fixboot

  Bootrec.exe/RebuildBcd

  When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.

• HP ENVY TS m6 Sleekbook: HP ENVY TS m6 Sleekbook will prepare the auto repair when booting with Seagate Backup Plus 2 to

  I had problems for some time with my HP ENVY when you restart.   I have a backup Seagate more Desktop 2 TB connected via a USB hub.    When it is connected and restarting the computer, it goes to the screen to "prepare the AutoFix.   So I have to unplug and restart and that's fine.     I don't know why it continues to be.   I checked my BIOS and it should boot from the hard drive first.     Any ideas?

  @mikejenkins1,

  Hello and thanks for the display on the HP support forums.  Using a USB hub, you get a signal from one of the disks is trying to make a repair due to a possible disconnection during a writing session.  You will need to do is a test on the external drives to see if one of them has problems.  Try to make a direct connect with each drive connected by tonight and see if they are the problem on their own.

  If one of them is causing the problem, try and use the test drive of windows.  Here is a link to help you with that.

  Check a drive for errors

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Windows 8 stuck in black screen after "making auto repairs.

  I had my HP laptop for five months. A few days ago that I opened the lid of my portable computer and it loaded and said "Configure automatic updates" at this stage, it was frozen. I held the power button down to do a hard restart. I turn it back on and it wouldn't start. I did a system refresh, defragment HDD, ran CCleaner and started in safe mode. At this point, the hard turned 100% use no matter what I did. I couldn't find a solution I did a system reset. He reset the whole PC and reinstalled Windows 8.  It got stuck in the facility to a black screen with just my mouse. I turned it off. Now when I turn on my laptop the screen goes black for about 15 seconds, then HP appears with "Automatic repair of preparation" below logo. It does this for about 20 seconds then the screen goes black. I left my computer for about 7 hours and the screen was always return. I do not have windows 8 CD or USB key. What can I do? Nobody here was willing to help with this problem, although there are a lot of Windows 8 users who have this. At this point, I am considering buying a Mac that I can't do it in the face of Windows 8. If someone could help me it would be apprciated. Thank you.

  I tried several repairs. I did a disk check by pressing F2 during the launch, and he said that the hard drive has failed. I contacted HP support and they are sending me a box to put my laptop in which I will return. So they will be replacing as there is somehow guaranteed on this subject. If someone experiences this problem, it is probably a hard disk crash. Good luck

• problems using two monitors. both screens show the same thing.

  I use the NVIDIA GeForce4 MX integrated graphics.  I need to use the monitors at the same time, but with a capacity for dragging from one monitor to the wire to the other.

  Hi Denise,

  See http://support.microsoft.com/kb/307873 to learn how to configure and use multiple monitors in Windows XP.

  To view the same desktop in multiple Monitors (Extending the displays)

  -In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  -Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  Hope this information helps.  Let us know if you have any questions.

• Lock Z10 blackBerry screen shows the content of the email/text after 10.2 updated

  I downloaded the latest version of the software a few days ago and I am horrified to see that now we can tap the notification on the lock screen and read the message! Why would anyone want that? How to stop this? If I can't solve this problem I receive another phone.

  ArchAngel666 wrote:

  Go to settings, security and privacy, lock screen and click on off lock screen notifications

  Another direct way, slide down the lock - notifications - screen - lock screen notifications - settings off.

  Everything you see now is an envelope with the number of messages.

• New calibration screen showing the b & w like sepia

  Hi all

  I just bought a new monitor, and when I opened the 12 items he asked me if I wanted to correct my color profile. I said yes, and now all the whites on this screen are displayed as a sepia as yellow color. When I move to photoshop to my other monitor, the picture very well. This isn't a problem with the monitor, like b & w images in other applications are displayed well. Anyone know how I can fix this problem?

  Thank you very much.

  In your PSEv.12, go to menu Image > Mode > RGB color. If this is true?

  In the Edit > color settings > always optimize for computer screens. If this is true?

• Satellite C855 stuck on the preparation of the auto repair when starting

  My laptop has been slaughtered like this for two days now. I have searched and tried all sorts of sites re come rations, but nothing seems to work. I tried the F2 button that takes me to the Setup utility, but no start in the safe mode option is there. So I tried the F12 key and tried the boot menu, but nothing works either.

  Do - what I need to do to solve this problem, I don't have the startup disk?
  Can I recover my data from the hard drive?

  What system you have, and it's a factory system pre-installed?

  In case you have a system Win 8, follow this work around:
  Turn on the unit and press F12
  Now you should see the start menu. The last option should appear as a HARD drive recovery.
  Choose HARD drive recovery and begin the process of recovery which would fix the laptop back to factory settings.

  But be careful: in this case the HARD disk will be formatted and you will lose data.

  In the case of Win 7, try this:
  Turn the unit on and press F8
  Now choose fix my computer
  Here, in the new window select Toshiba HDD recovery.
  This will start the recovery process and will the laptop to factory settings.

• HP Pavilion DV6: prepare the auto repair

  Hi, I just got more details during Test drive

  Test Drive: 1

  INTELLIGENT control: PAST

  DST short: FAILURE

  FALURE ID: PLM961-5HO815-XDO141-6OSVO3

  PRODUCT ID: LD945PA #ABG

  Hard drive 1

  Test drive: FAILURE

  Can you please suggest what is it?

  Hello

  The error code 24 characters (PLM961 - 5 H0815 - XD0141-600SV 3) is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K