Screen shows just "wallpaper" at startup; no tasks or icons bar.

Similar Questions

• When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

  Hi Greg,.

  ·         Have you checked the problem in safe mode?

  ·         What version of Windows operating system is installed on the computer?

  Try the following.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Start your computer in safe mode

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• My laptop screen shows just the color of the cursor and background that other users can connect as usual

  Dell Inspiron 1525 Windows Vista, I can only log in safe mode please help!

  Hello
  
  Thanks for posting your question in the Microsoft Community forum!
  Description of the problem, it seems that you can only connect in safe mode on the windows vista computer.
  
   
  I would appreciate if you can help me with the following information.
  
   
  1. don't you make changes to the computer before this problem?
  2. you receive an error message/code?
  
   
  Try these methods to start the computer in normal mode.
  
   
  Method 1
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of the link to start the computer to a Normal startup mode.
   
   
  Like the other users can log on as usual. Try to perform a restore of the system in safe mode.
   
   

  Methoad 2

  Try to run in safe mode system restore.

  Step 1
  Try to start the computer in safe mode, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2
  Once you start the computer in safe mode, try to perform the system restore and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.
   

• Open and save the screen show just a second then disappear.

  Hi-

  First time posting

  I can't save or open projects on the opportunity. The registration window will display for a second then dispear. same thing when I try to open a project. The window will then appear to disappear.  I edit on my iMac and my macbook pro.  This only happens when you are working on the iMac. The only way that I can work in Minister today is by opening a "new project". No problem on the macbook. Any ideas?

  Data sheet:

  running Adobe CC

  Operating system: X 10.9

  3.4 Ghz processor Intel Corei7

  32 GB memory at 1333 MHz DDR3

  NIVIDIA GeForce GTX 680MX 2048 MB

  Thank you

  Hi HishamTheMachine,

  Welcome to the forums.

  Please create new profile and check if you are able to launch the program in it. Please click on the link below and create a new profile. Restart your machine we have created the profile and then start the program in it.

  http://support.Apple.com/kb/ph4600

  If you are able to launch the application and work on it, then you may need to fix the permission on your old profile.

  Kind regards

  Vinay

• No tasks or icons bar

  Original title: computer starts normally, but shows only the background, no desktop bar or tool/task appear, no keys work, can't do anything.

  I tried safe mode, all I get is a black screen with the SafeMode in each corner, well stuck!

  Unable to acess anthing to try to solve this problem

  Do a system restore. Choose the date when there was not this problem as your restore point.
  How to restore the system:

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: In most cases, do it in safe mode system restore is more preferable.
  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.
  t-4-2

• The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  No, the soft part of the operating system, so it would mean reload the iOS together. Have you tried a forced reboot yet?

  Close all open applications by double-clicking the home button, and then drag to the top of the application window until it disappears from the screen.

  Reset your device: press and hold the home button and the sleep/wake button until the screen goes black, and you see the Apple, then let go. (No data loss)

• My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.

  You can try to reinstall an OSX, but I doubt if that will be successful.

  Ciao.

• just loading at startup screen but after loading is the screen is completely blank.

  original title: help with a Windows Vista laptop please help.

  When I start my HP Windows Vista laptop, it works very well and just loading at startup screen but after loading is the screen is completely empty. The keyboard works fine and the keyboard lights are on but nothing on the monitor. Help, please? Passing on the black screen the arrow appears, but again, it is all black.

  > @dhhuang they don't tell me because I have no guarantee and it's like over $ 100 just for talking on their phone, which I think is not worth.

  I'm sure you can order a set of recovery disks. You need to talk to a technician to do it. Yes?

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7: Black flash of the screen and no user at startup

  Whenever I boot Windows 7 Home Premium on my wife s Dell, no presentation of users after the Welcome screen. Diagnoses are thin back and there is no change in safe mode. It shows just the white background of Windows 7 and periodically flashes black. This is my wife's computer, and I can't do anything for risk data. Thanks for any help.

  Original title: no user at startup

  Hi Spencer,.

  Thanks for posting your query in Microsoft Community.

  Sorry for the inconvenience caused with Windows 7.

  More details would help us to best help you.

  1. "diagnoses come back fine and there is no change in safe mode", you are faced with this problem to the in/login-login screen? don't you realize that the user accounts to the login screen?

  2. "periodically flashes black", are you able to get to the login screen or this problem occurs before the login screen?

  3 did you do any change in software on the computer before this problem?

  4. What is the brand and model of your computer?

  Unplug all external such as USB key, printer, and scanner etc., devices (except keyboard and mouse) connected to the computer and check if the computer boots to the screen.

  If this problem (white screen) occurs before the login screen, you can do the Startup Repair by referring to article.

  http://Windows.Microsoft.com/en-in/Windows/Startup-Repair-FAQ#1TC=Windows-7

  If the problem persists please see "start the computer in safe mode and run System Restore" and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  After you start the desktop successfully, please visit the manufacturers Web site and update the graphics drivers.

  Hope the helps of information. Don't answer if you need more assistance.

  Thank you.

• Mac Pro 2014 Retina screen shows lightning under empty battery but won't turn on

  Screen shows lightning under empty battery, but won't turn on. I had plugged it with two adapters to support different (long and short) that accompanies the retina macbook 17 inches. Ive left plugged in for 24 hours and still will not light. I have tried reseting everything I saw on the forum other messages such as pressing shift-control-alt-power - release and then pressing button works / stop and nothing. Sometimes just showing the Red/low battery with Flash below the middle of the screen, but it will not activate. I have all my work on this computer and need to have on it.

  The green light on the magnetic charge cable is not, however, this has only worked from time to time and then for a while so I was not worried about it. Any advice?

  You have to go to an Apple Store or an authorized Service provider. The fact and take up virtually even with different Chargers, the indicator light on the MagSafe does not light up and the display on the screen of the cries of hardware problems. And these sealed Macs really are repairable no-no.

• How to make Windows 7 see the list of the user on the login screen, not just the last logged-on user

  I am running Windows 7 Professional 64 - bit and have two user accounts on my computer. Problem is that the login screen shows only the last logged user and one "other users" button which allows you to manually enter the username. Is it possible to return to the display of a list of all users instead?

  Jon

  OK... I found how to fix this problem. I know it's a few years since this topic (and most of the people moved to windows 8) but for those who are still Windows 7 who are tired to type the user name, whenever you log in, here is how to display the icons of the user:

  WARNING: This patch is not a hack. I do not use any third party software. I am simply change a security setting in the windows system. The longest part is to find the file. As much as I would like to say that this will fix all computers, I can't guarantee that this will be the solution for your system. This fixed my problem because my just setting should be disabled. That being said, let's move.

  As an admin (must be in an account that has administrator privileges) click the Start button and in the search at the bottom of the opening bar, the type of menu "Edit Group Policy" and press on enter. When the local Group Policy Editor window appears, click on the following arrows in the left column to expand the lists to find the file to change...

  > Computer configuration

  > Windows settings

  > Security settings

  > Local policies

  Security options<-Click on="" this="" file="" name="" or="" icon="" (the="" arrow="" icon="" won't="" do="">

  In the right menu appears a bunch of system settings, find the one that we called "Interactive logon: do not display last user name" This is the setting which will no doubt say "Enabled" beside him. Right-click on the file and select 'Properties', then disable the setting. Restart your computer and you should be good to go!

• My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.

  * Original title: look for the updates ms7

  My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.  Since 14 June I repeatedly ran checks the updates, but these controls are never successful as never - end research I just saw the "check updates" message, but the check never ends.   Why is this?

  The Windows Update client cannot manage a KB3161664. Download and install it manually in advance. Links provided here:

  http://Wu.krelay.de/en/

  Be sure to not do a search running in background.

  Best regards, VZ

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Ip5 ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick

  Ip5 U.S. spec in Malaysia ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick

  This indicates that you purchased an incompatible version of your region. See below for the correct templates

  https://www.Apple.com/iPhone/LTE/#iPhone-5C-iPhone-5s