Scribble effect gradient mesh tool

Similar Questions

• The use of gradients with the gradient mesh tool

  So I have a knowledge base to use the gradient mesh tool, but in my current project I need the gradients in the object to fade from black to transparent (it will be used for a single color tshirt).  I tried to do this in two different ways.  First, I created a massive white rectangle (no line) then created a column of 1 line 1 flat net of gradient on it.  Added the points I need, even added color and fade is exactly the shape that I need, but I can't find a way to get rid of the white and just melted transparent black.  I also tried to create a rectangle with a linear gradient, click on extend and chose the gradient mesh, but as soon as I press ok it modifies in black.  I've included a cropped picture of what I'm talking about.  All the tail feathers need to have this black gradient but without white, it takes out fade to transparent as other gradients around it.  I put a background color behind the image in order to make these areas easier to see.  Looks like there should be an easy fix, but I don't know how to do it. Any help would be really appreciated.

  

  Edit: define all black point meshes.

  Assuming that your version of Illustrator allows it, you can get what you want by adjusting the opacity of the mesh points, something like this:

  

• Gradient Mesh tool will not work on a standard gradient

  How can I get the NET tool to work on a gradient? If I place an RGB image and create a gradient on her net, I can select each individual point, and then use the color picker to select a color below by clicking on the placed image. However, if I create a gradient on a standard gradient mesh I can not pick up the color of the standard gradient which is below. What is the color picker, raise the overall slope. It does not put any color in the different points of the gradient mesh.

  Well, you can always gradient rasterize manually by flattening its appearance...

  Mylenium

• Gradient mesh tool-shaped doughnut-type

  Hello

  I am using the gradient in the shape of doughnut-type mesh. Basically I want the circle inside and outside donut to be black and the Interior to fade to gray and vice versa. In other words, I want the mest degraded to follow the path. Now I realize that the gradient mesh is unable to do this. So what I did cut my form into four and then try to apply the gradient mesh - still it did not work. I hope that him below will tell you about what I'm doing and what I end up doing!

  Thanks in advance for your help

  John

  

  Or...

  

  

  

  JET

• Gradient mesh - CS6

  I'm working on a tutorial using the gradient mesh tool.  In the tutorial, I draw a rectangle and with the gradient mesh tool, select a point in the rectangle so that it becomes a gradient mesh.  The problem is that in the tutorial, the mesh remains colorless, but in mine, it automatically fills with white, and I can't make them transparent again.

  I hope that there is just a setting that I need to check or uncheck

  Thank you!

  Nevermind, I missed the instrustion I was supposed to be in outline view.  Thanks anyway!

• Gradient mesh - segments distorted with no anchor points

  I often run into a very strange behavior with the gradient mesh tool, where a line segment becomes strongly deformed (bent, looped or with a hard angle in it) has no anchor points or control handles to take account of the distorted line segment. I've seen this happen with the gradient mesh tool. In my last occurrence of this issue, I should be a curve segment gently between two flat control points, and on the contrary, there is this huge "elbow" in what was a difficult angle and almost a loop that has nothing to do with the anchor points. There are has no anchor between these two points (I started with a rectangle and has begun adding and manipiulating points).

  Anyone know of what I speak and have a workaround or a solution? Or even an explanation of why this happens maybe make me less frustrated.

  t

  Meshes sometimes insert points "helper." Switch to the point less tool, then click on the 'assistance' to delete it.

  'Helper' points are visible only when the tool Point less is selected. They appear as small, strong, points compared to actual mesh points. Below is an extreme example of the "assistance" points being inserted.

  

• Question of gradient mesh

  How can I separate an object in Illustrator (CC) gradient mesh so that it looks like it is broken, and broken glass? I can take an ordinary object such as a form and cut it out with the knife tool, but it will not work on a gradient mesh. I tried the pixelation, expansion, without success. I also tried to open it in Photoshop and saving with a transparent background and a trace of shadow around her, in the two .eps, .psd, or png formats also without success. If I can do what I want to apply for parts 3D effects. It is a human form and I want "" burst". I need NET gradient to show the contours and the muscles of the body. I am doing something that is not possible? Thanks for any help.

  A 3D software will be much better for it.

  In Illustrator is possible, but it will be a laborious procedure.

• Export icons with in SVG gradient mesh

  I've been creating artificial intelligence using the NET tool icons, but when I export in SVG paths are distorted. I tried to export with a decimal number of 7, but that does not help.

  How to export it to SVG without deforming the railways?

  AI

  SVG

  As much as I know the gradient meshes are not supported in SVG.

  There is a project for 2.0 which promises support in his favor, but this is not final and you have to wait for browsers and Applications to support.

• Problems of duplication of gradient mesh

  Hello world

  I have a little trouble with the gradient mesh.

  I created a few script letters of which some is attached upward with a continuous mesh snaking around the letters.

  The problem is that the mesh shows through parts of itself where it overlaps.

  (see image below)

  

  Seems to be poking through part of the mesh.

  Any help to know how to solve this problem, or any workaround would be fantastic! As Cup of splitting of the mesh in the individual letters. It's my first foray into the nets of gradient, I have no idea what's going on.

  Thank you very much

  Pete.

  For the sake of explanation:

  1 pen. Draw a path that crosses over itself. Solid line, no fill.

  2 Appearnance Palette: Add the new Stroke. Give the line added a different color and greater weight and send it to the bottom stroke of origin. You should now have the appearance of a thin "path" effectively "bordered" on both sides of the thicker line color.

  Now look at the intersection where the trail crosses itself. Note that there is no "overlap". In other words, even if a path has a direction, and his anchorPoints have a prescription, the anchorPoints and unique (or path) path segments do not have a stacking order in the Z direction (front / rear). In other words, "latter" segments a path of not not 'overlap' segments 'earlier '. They intersect just as two roads intersect at a four way stop; one road is not "pave over" another:

  

  It is similarly transparent traces. Even if more than one subpath can consist of a compound path, all subpaths are at the same level in the stacking order Z:

  

  So it really shouldn't be a surprise that the 'later' end your gradient mesh object does not overlap at the end "earlier". However, while the whole mesh that defines the shape does not have a Z-stacking order, its degraded individual patches are. But you have to understand what constitutes the "end of the beginning" and "end" later Take into account:

  First, imagine a square which is divided into four parcels of the same size. How the program if the two "ends" of this object are to the left and to the right, or up and down?

  Second, realize that a gradient mesh wants to divide everything into a rectangular grid. No matter how you end up distorting, the program "thinks" of an object of mesh as a rectangular array of rows and columns.

  You can view this in a sense similar to the ordinary text. Words are sorted from left to right. 'Later' (in the foreground) is the right word. Suppose you enter a new Word to the left of the sentence; the word most right is always the highest. Now add a paragraph return and type some more. The paragraph at the bottom is the 'more '. If you enter a new paragraph at the top of the textframe, substantive paragraph is always the 'more '.

  Think of the columns of stitches from left to right as 'words' and the up and down lines like 'paragraphs', with a warning that "paragraphs" are classified in bottom to top instead of top down.

  As usual, when confused about a behavior, just a little experimentation with simpler objects you can design to replicate the problem reveals what is happening. Mesh patches are stacked in a low upward (lines), order from left to right:

  

  

  

  So in your example, you just wait for a column of cells to be quite in the front of the column to the left of it, just because you've coloured cells in a mode of left to right. You're just confuse yourself. You see the "intertwining" of cells of different lines and think that something is wrong. It is not the case. So the solution is simple (although certainly not intuitive). Turn your expectations of 90 degrees:

  

  

  

  JET

• Perplexed before the gradient mesh

  I used the gradient mesh in time. Usually, it does exactly what I want it to so I never asked me how it worked. Today, I was working on a project and I can't seem to get the mesh to do what I want.

  So I went out to do some research and I can't find information on this topic anywhere. It seems almost mystical. So, if there is a great resource that explains the logic behind how Illustrator choose the beginning and end of a line of mesh, please send it to me and I apologize in advance if this info is easy to find.

  Here's my problem. I have a curve. If I click in the curve where I want a line of mesh, the mesh line does not follow the shape of the object.

  Here is my form

  

  When I use create gradient mesh, it's the stitch that I receive. My question is why the mesh lines did not follow the curve of the object. The first two columns are fine, but the last column is totally messed. Why he chose to use the points outside the curve as the end points? I get similar results when using the NET tool.

  

  As I know there is no way to change it, after the mesh is created. You cannot delete an end point and you can not move it without completely rebuilding your silhouette.

  I created a simplified form with fewer points and it does exactly the same thing.

  Does anyone have a help or advice on this topic. I don't understand why you are not able to control where the beginning and the end is a stitch line when using the NET tool. How is it chooses a start and end? This puzzled me. It seems random to me but I don't know it's just because I didn't understand the model at the moment.

  Select these 4 points with white arrow tool before you move to create the gradient mesh

  

• Gradient mesh: Options to simplify

  Is there another way to simplify a net of gradient without pixelation or expand?

  On another note: is it me or has Adobe done the difficult to find Illustrator Forum? I don't know why it does not appear with the other major forums.

  By "simplifying" do you mean removing some lines mesh? You can make it by Option-click with the Mesh Tool (U) on existing lines to make them disappear.

• Animate a gradient transform tool?

  I want to animate a gradient using the Gradient transform tool
  with a Tween for a sweep of beautiful shine effect.
  I remember that it worked in earlier versions of Flash, but I can't
  make it work in Flash 8.
  I do something wrong or is this newer driveway feature
  versions of Flash?

  Cannot tell what you are doing 'fake' without knowing what you are or are not :)

  It works in the same way that previous versions - use of motion tweens with gradients :)

  http://www.Adobe.com/devnet/flash/articles/tween_macrochat.html

  Chris Georgenes
  Animator
  http://www.Mudbubble.com
  http://www.keyframer.com
  Adobe Community Expert

  *\^^/*
  (OO)
  <---->

  aquastealth wrote:
  > I want to animate a gradient using the Gradient transform tool
  > with a Tween for a beautiful effect of scanning shine.
  > I remember it worked in earlier versions of Flash, but I can't
  > make it work in Flash 8.
  > I do something wrong or is this newer driveway feature
  > versions of Flash?
  >

• Is there a prime CC effective noise reduction tool?

  To return in the first and enjoy it a lot, it of changed a lot since I modified it used in 2002/3 - anyway, is it a video first, available effective noise reduction tool not audio noise.

  Nope.

  Make your choice:

  Neat video - best digital video noise reduction

  Red giant | Denoiser II, easy video noise reduction

  FROM: Noise - RE: Vision Effects

• Cleaning of gradient mesh

  When you remove the gradient mesh paths, I get these results in ugly, not to fix, I'm leaning towards, not; and I have to manually adjust the curves of node?

  

  
  

• Mesh Hangman plugin works with in Illustrator gradient mesh! HUGE CLAIM to show the mechanism of this plugin loading in Illustrator CS5! I did not... who knows the loading mechanism on the illustrator of the AIP files? How to get directions to

  Mesh Hangman plugin works with in Illustrator gradient mesh!

  HUGE CLAIM to show the mechanism of this plugin loading in Illustrator CS5!

  I did not...

  Who knows the loading mechanism on the illustrator of the AIP files?

  Get directions how to proceed.

  Download the CS5 version
  

  Executioner of mesh

  Unzip

  Stop Adobe Illustrator

  MeshTormentor.aip to

  C:\Program Files (x 86) \Adobe\Adobe Illustrator CS5\Plug-ins\Extensions

  
  

  Start Adobe Illustrator window > MeshTormentor

  User Guide

  Mesh executioner Adobe Illustrator plugin - complete Guide - Freebies - Vectorboom