Scrip to set the letter spacing and word spacing

Similar Questions

• Why the letter spacing is ignored when running in dynamic text fields?

  I use dynamic text fields using the font Arial embeded in Flash 8 on Windows XP and when I set the letter spacing of 5, then run it film the spacing is lost. Tried with several other fonts and they always lose their spacing during execution.
  
  Why is this?
  
  Kevin

  it solved!

  You must reset the value linespacing in code after you put text, as follows:

  var my_fmt:TextFormat = new TextFormat() / used to change the color of the text
  Label.Text = "" Hello World ""
  my_fmt.letterSpacing = 1
  label.setTextFormat (my_fmt)

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?

• Unable to set the IP address and the DNS servers manually

  I am running Windows 7 Professional 64-bit with SP1 on a Lenovo ThinkPad. The problem is that whenever I connect to my home LAN I can not put addresses IPv4 and DNS servers manually. Once I got close and open network and sharing Center option 'obtain an IP address automatically"is re-selected.

  I tried to set the IP address and DNS servers by entering the control panel command in administrator mode but the problem persists. The problem with the automatic configuration of IP addresses, is that my ISP DNS servers are slow, resulting in a slow internet. I also tried just setting DNS servers leaving windows automatically get IP addresses, but that did not too.
  I appreciate any ideas as to why this is happening and how ressemelable this question. Thanks in advance.

  Hello

  I suggest you to ask your question on the TechNet Forums, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• How you set the font style and size as the norm for the e-mail that is sent and received?

  I, too, have this problem. Am using Outlook.

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-desktop/how-do-you-set-the-font-style-and-size-as-the/d48a95c5-68a1-4766-873d-d9924004feab

  Outlook policies can be changed in options.

  1. On the file menu, click Options
  2. Go to the mail section, and then click stationary and fonts
  3. Choose your fonts

  

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• How to set the user name and password when you use the class for SOCKS5 Proxy?

  Hi all
  
  I use the proxy class for SOCKS5, so need to set the user name and password, I can't find where I put the value. If the API support.
  
  Thanks in advance!

  Exactly how to repeat the question five times ater, we told you the answer would erase anything? A: this isn't. This irritates just the hell out of people. Irritating the hell of those who's trying to help you is not rational behavior either.

  I have no idea on the support of third-party for transmission by proxy via NIO.

• How to set the computer name and domain name

  I try to install R12.1.1 EBS on windows server 2003
  I'm in following the
  Thread: Oracle E-Business Suite R12 Installation on Windows 2003
  
  
  to write hswaan in step 2
  
  (2) set "ComputerName" and "Domain Name".
  
  How can I set the computer name and domain name in my windows 2003
  Please send me the steps to do
  
  respect of
  Noman

  Hello

  It is already mentioned in the same thread.

  -Right click on "My computer" > properties > "ComputerName" > change
  -The value "name of the computer.
  -Click on more
  -The value "This computer's primary DNS suffix"

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• It is best to set the resolution size and icon of the screen up

  It is best to set the maximum screen resolution before attempting to adjust the size of icons and text on the desktop, notification area, Quick Launch bar and start menu? I know that the icons can be made to the largest and by choosing a lower screen resolution but y at - it a benefit to have the maximum resolution? My view is not too good and I need icons and text to be big enough.

  Hello

  The screen, or the screen resolution, resolution refers to the size of the whole image displayed on your computer screen. Specifically, he refers the number of picture elements, or pixels, which are displayed at the same time. A pixel is the smallest element on your computer screen, the more pixels, the more detailed the picture will be. With fewer pixels, display items will be larger, but there will be less space on the desktop for windows and the programs to run.

  You can visit the link provided below for more information about the screen resolution in Windows XP.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

• In WordPad, how to set the default fonts and layout

  We want WordPad to open a text file with some settings in the page setup and the police.

  As you found, change the file extension does not add features to WordPad. It would seem that the only way is to get MS Word... :-)

• BlackBerry smartphone how to set the phone lock and password

  I have a new "BOLD" of BB and have forgotten how to program the phone to lock automatically after not used to say 5 or 10 minutes.

  You don't say what model # of "BOLD", so these may vary...

  Options > Security > password.

  Set the password and the amount time to before the device itself is locked.

• the Office Windows and word and upgrade to 7

  I do a clean update of Vista to 7 on my Pavilion M8547c. Where can I get word and office that were pre installed on my machine? I have 20 letters and numbers to ID 2 programs. I looked on the MS site and could not find a free download.

  Mishka wrote: I did not yet installed windows 7 and I don't have the original HP vista recovery disks. So if I understand correctly, I need to recover to the original vista (as delivered), before starting the upgrade process to Windows 7. I have a ultimate edition upgrade. I'm not very tech savy, so any help would be useful. Thank you

  Hello mishka, thank you for the information. Since advise you that you did not install Windows 7 yet, and you do not have the game to restore HP Recovery disk, you will be able to solve this potential problem.

  I remember that there may be a way to retrieve the applications of origin using the disk HP Recovery restore after I installed Winodws 7.

  Here is the procedure to reinstall the applications on your system using the restore from the recovery disc.

  Once completed your installation of Windows 7 and from the desktop, insert the recovery disk into your CD/DVD drive. Wait for the HP software to load. This will allow the CD to run and install the programs and drivers you choose.

  Check what are the applications you want to install and press "install". You can uninstall the HP software later if you wish.

  Select 'Applications' in the tabs listed.  If you are prompted to restart, click 'No' until all applications are installed. Choose "Reboot now" on the last request.

  Open each program to ensure that they are properly installed. If the key codes are needed, control papers for the key of product supplied with the system. These will contain a compulsory license or key codes.

• How to set the processor affinity and memory.

  We have explicit recommendations of our application provider to set the processor affinity for one of our virtual machines running their product. However, this process is not quite clear to me despite the available docs. We are company ESXi 5.1 more.

  By looking at the tab "resources" for the parameters of the virtual computer you see under CPU:

  Actions (I would do that quite high so that it never goes to confront other good?)

  Booking

  Limit

  The requirement is to set aside x cores for the virtual machine while it is never claim to waiting or resource. They would also potentially implement affinity memory related to the same socket for the effectiveness of the NUMA node.

  We have a host with 2 8-core processors with 256 GB of memory. I'm not worried about the affinity of memory. This should be as simple as the control that the 'reserve any memory comments' correct?

  Is it simpler just set up a pool of resources for cela CPU and memory? The only concern I have is it if the processor uses the same memory channels. We do not want a CPU into a socket using the channel memory of another plug for this virtual machine.

  And it's too late to go back to physics for this system.

  Eeghads! Just FYI, the processor affinity is almost never what a seller really wants, even if they think they do. I can imagine there are valid use cases, but I spoke with several vendors who recommend this, and they were all wrong.

  From what I understand in your summary, the application is sensitive to the latency of the CPU. If the physical compute capacity, actions and reservations will address the latency. Latency is the only reason why they want to set the affinity, or are there others? If there is other, know what they are, because there is a good chance to those who are also invalid reasons. The processor affinity tends to exacerbate the problems you're having with loans time CPU and can often cause latency application MORE CPU than that without it. Yes, you can set up reserves of CPU to address these issues for this particular virtual machine, but you made life more difficult for the CPU scheduler. DRS involved in the loan time CPU, which means she won't necessarily move these other virtual machines on this host, even if they are jointly stop like crazy. While we're on the subject, this virtual machine would need to be excluded from automatic DRS migration, since you cannot vMotion with the processor affinity configured. It also means the virtual machine must be powered whenever his current host goes into maintenance mode.

  In any case, verification 'reserve any memory comments' will not affect memory locality. Will just leave all the pages of virtual memory with physical memory pages (another side effect interesting is that creates the virtual machine is no longer a pagefile on the boot). If you REALLY have to set the affinity to the CPU/memory, memory affinity can be set by changing the settings of the VM, the tab "resources", select Advanced Memory, and you can configure NUMBER here. In addition, if you had already seen it, the processor affinity is configured in the tab "resources", under Advanced CPU.

  I highly recommend you challenge the seller and ask if reservations CPU are sufficient. The planner of UC is already aware NUMA. VCPUs how they ask, anyway? Unless they want to more than 8, it is unlikely to split the virtual machine.

• How to set the size (height and width) 100% swf

  Hi all

  Here, I want to put my SWF height and width to 100%.

  If I want to increase my height by hanging out on my corner SWF then automatically the width should change.

  If the two should be 100% in all cases. How to get there.

  In the browser? Flash can not set the size of itself - its size is defined in the HTML code. You must use JavaScript to set the Flash object width and height on window resize event.