script powercli pour several VM IP changer

Similar Questions

• Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

  Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

  In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

  When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

  I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

  Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

  Java
  
  If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

  • Check commonly used plugins: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Update or install Java (aka, next generation Java plug-in for the Mozilla browsers): install or update Java in Firefox

  Trend Micro
  
  You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

  Problem with the display of the Add-ons Manager
  
  The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

• Run scripts PowerCLi PowerCli console?

  Is it possible to run scripts PowerCLi PowerCli console?

  I want to use the batch with PowerCli orders orders... and I'm stuck on adding entries PowerCli keyboard console.

  You don't need the parameter of hard disk, the hard disk is passed through the pipeline of the cmdlet Get-disk hard.

  If the virtual machine has more than 1 hard drive, you use a Where clause to select the hard drive you want.

  Get-disk hard - VM "MV0857-gastela" |

  where {$_.} Name - eq "Hard Disk 2"} |

  Together-hard drive - CapacityKB 20000000 - confirm: $true

  You can call PowerCLI cmdlets, but be sure to connect all first.

  Something like this for example

  C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsoleFile  "C:\Program Files\VMware\Infrastructure\vSphere PowerCLI\vim.psc1"  -command "connect-viserver MyVC | out-null; Get-VM"
  

  Have you set the execution policy for PS?

  Make one

  Get-ExecutionPolicy

  To change you could do

  Game-ExeecutionPolicy RemoteSigned

  Just do it once.

• Script to add several vPortGroups on a vSvitch on the mulpitple hosts

  Hello

  I have a small script to add several vPortGroups on a vSvitch on mulpitple of the hosts.

  The Script looks like:

  $ObjHosts = get-VMHost host12 * | Sort-Object-property name

  Import-Csv "C:\vPortGroups.csv" - UseCulture | %{
  {foreach ($objHost to $ObjHosts)
  $strVSwitch = get-Virtualswitch - VMHost (Get-VMHost $objHost) | WHERE-object {$_.} {Name - match "$_.strVSwitch"}
  Write-Host "Adding virtual port group" $_.strNewVPG "with VLAN Tag' $_.strNewVlanTag 'to' $_.strVSwitch 'on' $objHost
  New-VirtualPortGroup-name "$_.strNewVPG"-VirtualSwitch "$_.strVSwitch"-VLanId ' $_.strNewVlanTag '.
  }
  }

  The input file looks like:

  strNewVPG; strVSwitch; strNewVlanTag
  "4.244.151.0 - 24"; «vSwitch1 «;» 120

  If we use only the line "Write-Host"Adding Virtual Port Group"$_.strNewVPG" with VLAN Tag ' $_.strNewVlanTag 'to' $_.strVSwitch 'on' $objHost' "

  the output is "add the port group virtual 4.244.151.0 - 24 with VLAN Tag 120 to vSwitch1 on d100spwesxc3101.d100.intern.

  Thus, the input file is correct and legible for the script.

  If I use the full script, the output message is:

  New-VirtualPortGroup: cannot bind parameter 'VLanId '. Cannot convert value ' @{strNewVPG = 4.244.151.0 - 24;} '. strVSwitch = vSwitch1; "strNewVlanTag = 120} .strNewVlanTag" to type "System.Int32". Error: "I."
  nput string was not in a correct format. »
  C:\Dokumente und Einstellungen\user1\Eigene Dateien\VMWare PowerShell Scripte\add_VirtualPortGroup_by_inputfile.ps1:7 tank: 83
  + New-VirtualPortGroup-name "$_.strNewVPG"-VirtualSwitch ' $_.strVSwitch ' VLanId - < < < < "$_.strNewVlanTag."
  + CategoryInfo: InvalidArgument: (:)) [new VirtualPortGroup], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.NewVirtualPortGroup

  What's not here?

  I made a few changes to your script. You can try the new version?

  $ObjHosts = Get-VMHost host12* |Sort-Object -Property Name
  
  Import-Csv "C:\vPortGroups.csv" -UseCulture | %{
      $vPortGroup = $_
      foreach($objHost in $ObjHosts){
          $strVSwitch = Get-Virtualswitch -VMHost (Get-VMHost $objHost) | where-object { $_.Name -match $vPortGroup.strVSwitch }
          Write-Host "Adding Virtual Port Group" $vPortGroup.strNewVPG "with VLAN Tag" $vPortGroup.strNewVlanTag "to" $vPortGroup.strVSwitch "on" $objHost.Name
          New-VirtualPortGroup -Name $vPortGroup.strNewVPG -VirtualSwitch $strVSwitch -VLanId $vPortGroup.strNewVlanTag
      }
  }
  

  One of the main problems was that $_ represents only the object from the pipeline last. So I added the line $vPortGroup = $_ to keep the line from the file entry in the variable $vPortGroup.

  Best regards, Robert

• Types of lists vNic script PowerCLI

  Does anyone know script PowerCLI export the following information in an Excel spreadsheet?

  1. the virtual computer name

  2. IP address

  3. Mac address

  4 port Group

  5. type of virtual network adapter (vmxnet3, E1000, etc.)

  Number 1 and number 5 are the most important for us at this immediate moment.  I have to identify the virtual machines do not have vmxnet3 adapter, so we can change them.  Thanks in advance.

  Try this

  Get-VM | Select Name,
      @{N="IP addr";E={[string]::Join(',',$_.Guest.IPAddress)}},
      @{N="MAC addr";E={[string]::Join(',',($_.Guest.Nics | %{$_.MacAddress}))}},
      @{N="Portgroup";E={[string]::Join(',',($_.Guest.Nics | %{$_.NetworkName}))}},
      @{N="NIC type";E={[string]::Join(',',($_.Guest.Nics | %{$_.Device.Type}))}}
  

• Definition of Orchestrator to execute a script PowerCLI

  What is the best way to implement Orchestrator to run a powerCLI script?

  Hello TheVMinator,

  Here are the first two ways that come to mind for me:

  1. VCO run under Windows - use the 'command' to fall at a command prompt, and then run your scripts PowerCLI from the vCO Server (you can use the method described in this article to access the object of the control: How to execute a PERL Script from a vCenter Orchestrator Workflow)
  2. Install the PowerShell plug-in, configure WinRM, then run your PowerCLI scripts on the remote host that you configured via WinRM (reference: seamless integration with PowerCLI and PowerShell plugin |) VMware vCenter Orchestrator Blog - VMware Blogs)

• Need a script powercli on behalf of user ESXi servers list

  Need a script powercli on behalf of user ESXi servers list

  My mistake, try something like this

  $user = "root" $pswd = "password"
  
  Get-VMHost  | %{
    $esx = Connect-VIServer $_.Name -User $user -Password $pswd  Get-VMHostAccount -Server $esx |  Select @{N="Host";E={$esx.Name}},@{N="Uid";E={$_.ExtensionData.Id}},Id,@{N="Name";E={$_.ExtensionData.FullName}}
    Disconnect-VIServer -Server $esx -Confirm:$false}
  

• SCRIPT TO IMPORT SEVERAL IMAGES PLACES... AND MULTIPLE IMAGES IN SINGLE OUTPUT PDF.

  Anyone got a script to import several images placed in CS4? or is it possible in CS5?

  and we can out of the multiple layers in a single PDF in illustrator?  Or several layers in single format JPEG from illustrator with a single command instead to save individually on each page... would be a huge timesaver for me.

  Currently I pulled out each layer individually filled then right-click on these JPEG output files in the output folder and choose "combine taken supported files in acrobat... "to create a unique acrobat...

  I also that to be able to CTRL click multiple layers and go save as... only these layers be saved on...

  And so add something in the Save to output PDF save the Layers dialog box to multiple pages would be a useful time saver...

  In CS 4 and CS 5, you can drag and drop FRO m the finder or bridge, and I suppose that any other viewer of similar type, multiple number of image files to a document. You can configure the bridge so that you can see the bridge and your document at the same time for this purpose.

  If you drag and drop files are linked, if you drag while holding down the SHIFT key, then the files will be incorporated.

  ID and PS CS 5 have a minijonction who works the way sam but is actually a Panel and will stay at the front.

  

  I have separate images but they import on the other.

• Is there a script to move several tabs at the same time

  Is there a script or a way of being able to move several tabs at the same time - I need to change the size of a document and all the tabs need to move at the same time - is it possible to do so.  Have several financial sheets should reformat - thank you very much!

  Jjust found a cool script of Shane Stanley moving several tabs in indesign [Archives] - Desktop Publishing Forum that works just the way I want it – here it is:

  say application "Adobe InDesign CC 2014"

  the value theMeas to my doIDdialog()

  set theTabList to tab list of the paragraph 1 of the selection

  set theTabPositions to position of tab stops to paragraph 1 of selection as points

  Repeat with I from 1 to the number items in theTabList

  set the position of the point of theTabList to 'p' i & ((point I of theTabPositions) + theMeas)

  end Repeat

  define tab list some points of selection at theTabList

  end say

  on doIDdialog()

  say application "Adobe InDesign CC 2014"

  the value measUnits to measure horizontal units of view preferences of the document 1

  Try

  destroy each dialog box

  end try

  Set restart to make dialogue with properties {name: "Putting the selection handles"}

  the value C1 to do dialogue column restart

  do static text in C1 with properties {dynamic label: "' amount to move all tabs:" "}

  the value C2 do to column of the dialog box to restart

  the value mComb1 to do measure combobox to C2 with properties {min width: 80, content Edition: '1', big helping hand: 10, nudge: 1, string list: {'-25', '-20', '-15', '-10', '-5', '5', '10', '15', '20', '25'}, change the units: measUnits, value: 1000 maximum, minimum value:-1000}

  activate

  with timeout to 10000 seconds

  Show reboot

  If result = false then

  beep

  Restart to destroy

  Error number-128

  end if

  end timeout

  the value comboMeasNum1 to change value of mComb1

  Restart to destroy

  end say

  return comboMeasNum1

  end doIDdialog

• script to run several queries to find/replace

  Working on a big book of ID document (* .indb), I saved dozens of queries to search/replace (named "col01', 'col02' etc.) that I run on 'all documents '. For some reason, I have to run these queries several times a day.

  So I'm wondering if he has, or if someone out there will write: a script that runs these queries one after another. Given the size of the book, it may be necessary to provide the script to pause after each query (before it turns on with the next), but I'm just guessing.

  Any help is very appreciated!

  • Pre-installed FindChangeByList script (in the folder "Scripts Panel > Samples")
  • Script to change by queries to find
  • Multi-find/change script (commercial)

• Thunderbird freezes, it does not solve thunderfix. MosBackup do not restore or backup, I have deleated several emails without change

  I use Thunderbird for several years with no problems, while I can still receive/send emails, the program freezes. I tried 'Thunderfix' without change, Mozbackup stalls 'calculate the required space', also fails to restore the last backup or previous backups. I have reduced the number of e-mails, including mail, has also increased from 350 MB to 500 MB disk space. I also began with all addons turned off. It freezes again

  Does anyone have suggestions more?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• How to make a VB script on the computer after you change the files?

  Original title: HI! I have to run a VBscript on windows7 as modfying user (not administrator) files in c:\program files\mycompany. Is this possible?

  It works to disable the UAC. There is no way to let him work with UAC on? (Perhaps change somehow permissions files?)

  You have two options:

  • Turn off UAC (not recommended)
  • Change the script so that it generates a UAC challenge (to which the user must respond with an admin account & password).

• A script to add several layer text names

  Hello world

  I am quite new to this, so I hope you don't mind if my question is maybe a bit simple for the pros...

  Basically, I'm looking for a way to add multiple names of layers in the form of text boxes. I found this script below pixxxelschubser, which already ensures the task.

  Re: Script to add the name of the layer to the artboard in text form

  However, this script updates all the text boxes in a position to (0,0). I'm looking for a way to change this, until the first box (0,0), the second area is (0.10), third (0.20) and so on.

  I guess it's sort of a loop thing, but I'm really not familiar with this, so just a little hint would be great

  Thanks in advance!

  Marco

  If you want to get into writing scripts, check out the official guides here

  Illustrator script | Adobe Developer Connection

  Adobe assumes that you are already familiar with javascript, so you need to learn javascript separately, you can start here

  JavaScript | DND

  Here is a version of the pixxxel script that moves the vertical position

  // LayersnamesInUpperLeftCorner.jsx
  // https://forums.adobe.com/thread/1546630
  // write layers names in upper left corner of the active artboard
  // required: opened document, no toplevel layers locked, all layers visible
  // regards pixxxelschubser
  var aDoc = app.activeDocument;
  var theLayers = aDoc.layers;
  var x = 0;
  var y = 0;
  var verticalOffset = 10;
  
  for (i=0; i		   

• Authentication and script PowerCLI on demand

  I have a powerCLI script I want to program but I want to do by calling with vRO.  However, I don't want to save my password in the PowerCLI script - I would like the script to authenticate on the server vCenter Server and for example to list running virtual machines once a day.  How can I call this script from vRO without storing the password in the script itself?  vRO and the PowerShell host are on separate virtual machines.

  There are builtin PowerCLI CredentialStore (see the New-VICredentialStoreItem).

  An alternative is the method described in password encrypted local store in a PowerShell script

• Is - this script PowerCLI obsolete?

  In an ESX 5.0 environment, I have a group of VMFS data store ten stores of data visible to a group of thirty-two guests. Each data store uses currently multipathing fixed to each host, but I want each data store instead use repetition alternated for all guests. I found the following on https://runningvm.wordpress.com/2010/08/31/vsphere-powercli-multipath-policy-script-examples/ ((troisieme paragraph):

  #Sets policy of multiple paths for all EMC LUNS (naa.6006*) connected to all hosts in the Cluster RV00 to roundrobin

  Get-Cluster RV00 | Get-VMHost | Get-ScsiLun - CanonicalName "naa.6006*" | Game-ScsiLun - MultipathPolicy "roundrobin".

  It promises to do exactly what I want, but page was published in 2010 and I fear it may be obsolete. Everything in this script still works in ESX 5.0?

  Also, can this little script to correctly run its own? Read further down the page linked sixth paragraph and following), I see the author offers a script plus much, much for implementing Multipathing to round robin, and makes me fear that this little one-liner may not be intended to stand on its own and can leave pieces untied and hid the consequences. Can someone comment on that?

  Thanks a ton, everyone!

  Yep, it should always work. I've actually used something similar earlier this week

  The plu script is just a bit more generic (i.e. you request credentials, clusters, etc.) and also defines the strategy of selection of the default path for the type of storage array. Maybe something to do for the new LUNS are configured correctly by default. It does not depend on the use of esxcli.exe, while you could do this with Get-ESXCli