Script to create the heat map in Indesign 5.0 PC?

Similar Questions

• Generate the heat map to multiple Images

  I am a fairly new user for Photoshop and can bit larger than I can chew with a project I am doing.

  I have several images of a human body. People have made marks on the image based on certain criteria. I need to combine images into a single image and generate a heat map showing the percentage of people who have made marks in a given area. My plan is that this, this was to import the part marked each picture in a layer and normalize the color is the same in all layers. I then put the opacity of each layer at 1%, with the outline of the body on the bottom layer. Finally, I have an image which shows strongly marked areas denser than the lightest points scored.

  My problems as I see them are twofold.

  (1) because the opacity is only a range of integers from 0 to 100, after that I have 100 layers, I run the risk of losing information in areas where each layer has a brand in the same place. Since I now have an opacity of 100% to this place, all the extra layers will not add to the opacity.

  2) there are several combinations of images based on different criteria, and the number of layers in each image is not the same. The final heat maps must show the percentage of marked areas. So an image with layers of 80 and image with 100 layers must display the same percentages for the heat map. I mean, if 40 people over 80 mark a place, which represents 50% of the total, while 40 people on the 100 mark in the same place, if by 40%. However, based on my strategy of opacities coming to overlap, the two will show the same density (40% opacity).

  I hope that someone can suggest a strategy to overcome these limitations, or other method of combining images to create the final heat map.

  This is my first post so I tram don't know if that's an appropriate question or it is the appropriate forum, but no help any who can offer would be immensely appreciated.

  Have you checked the smart objects and stack Mode?

  Stacks images in Adobe Photoshop

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Running script to create the target database user account: OIM 11 g

  Hello
  We have a database resource on which accounts are created by running a set of scripts. Creating a user on the database directly is not allowed. Is this a common use case? I am sure about how IOM knows that this account was created (how I would list the resources allocated to a user)? If I'm not listed as a resource for a user account, then how changes will be...
  
  Any suggestions or advice are appreciated.
  Thank you!

  Do the steps in the procurement process for example process shape, object resource, etc. from process.
  Call your script adapter java task map the response code returned by your script.

• How to create the plugin in Adobe InDesign CS5 using java?

  Hello

  I wand to create the new plugin in adobe Design CS5 using java. Is knowledge about this help please me on that...

  1. I don't think it's possible. Real plugins are written in C++. I bet you're confused plugins scripts-- these can be written in different languages, but I'm not sure that Java is among them.

  2. place in the InDesign SDK forum. We here are mostly powerless like the end user.

• WLST Script to create the domain weblogic for IOM and OAM

  Hello

  I intend to set up PS3 IOM - OAM in the new environment. We intend to perform the installation in silent mode. Does anyone have example WLST to create the domain weblogic for IOM or OAM?

  Thank you

  Here is an example of OUD. I post this one since it's the simplest and shortest, but it is the same for OAM and IOM except that the script is much longer because they ask a lot more questions. You will need to export the variables used or replace them with the appropriate values for your system.

  wait-<>

  the value of timeout 600

  spawn ${OUD_BASE}/${WLS_NAME}/common/bin/config.sh mode = console

  # Create a WebLogic domain

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Choose the components of the Weblogic Platform

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # | ___Oracle directory Services Manager - 11.1.2.3.0 [Oracle_OUD1] [3]

  wait {}

  {"Enter number exactly as it appears in the media *" {send "3\n"}}

  wait {}

  {"Enter number exactly as it appears in the media *" {send "n"}}

  # Change the domain information

  wait {}

  "" Enter the value of * "{send" ${OUD_DOMAIN_NAME} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Select the target area for this domain directory

  wait {}

  {'Enter' new target location GOLD * {send "${OUD_BASE} / user_projects/domains\n"}}

  wait {}

  {'Enter' new target location GOLD * {send "n\n"}}

  # Configure password and username administrator

  wait {}

  {"Enter the number of the option to select GOLD *" {send "2\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Configuration mode field-> 1 | Development mode

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Java SDK selection

  wait {}

  {"Enter the index number to select GOLD *" {send "2\n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "${JAVA_HOME} \n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "n\n"}}

  # Select Optional Configuration

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "n"}}

  # Configure the Administration Server

  # Change "Listen port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_PORT} \n "}}"

  # Change 'SSL enabled.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Change 'SSL listening Port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_SPORT} \n "}}"

  # Then

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # wait for install

  wait {}

  {"Successfully created * field *" {send "\n"}}

  EXPRESSIONS OF FOLKLORE

• The script that creates the default tabs in the margin of the document.

  I need a script that creates marks (1 cm margins: top, left, right, down and two others in the Center, a vertical and a horizontal) independent of the document size. Would look like this: whenever I create a new document, execute an action which rodadoria the script to create a document with the enclosed area, similar to the figure below: thank you!

  http://zip.NET/brsW9j

  #target photoshop;
  if(documents.length) main();
  
  function main(){
  var strtRulerUnits = app.preferences.rulerUnits;
  var strtTypeUnits = app.preferences.typeUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  app.preferences.typeUnits = TypeUnits.PIXELS;
  var cm = activeDocument.resolution/2.54;
  var W =activeDocument.width;
  var H =activeDocument.height;
  guideLine(cm,"Vrtc");
  guideLine(cm,"Hrzn");
  guideLine(W-cm,"Vrtc");
  guideLine(H-cm,"Hrzn");
  guideLine(W/2,"Vrtc");
  guideLine(H/2,"Hrzn");
  app.preferences.rulerUnits = strtRulerUnits;
  app.preferences.typeUnits = strtTypeUnits;
  }
  function guideLine(position, type){
      var desc27 = new ActionDescriptor();
          var desc28 = new ActionDescriptor();
          desc28.putUnitDouble( app.charIDToTypeID('Pstn'), app.charIDToTypeID('#Pxl'), position );
          desc28.putEnumerated( app.charIDToTypeID('Ornt'), app.charIDToTypeID('Ornt'), app.charIDToTypeID(type) );
      desc27.putObject( app.charIDToTypeID('Nw  '), app.charIDToTypeID('Gd  '), desc28 );
      executeAction( app.charIDToTypeID('Mk  '), desc27, DialogModes.NO );
  };
  

• Script to create the folder on the physical disk and not in the package

  Hello-

  Attached is a script that I have which will create a folder on the C:\ inside the bubble.  What I need, it's so he can create a folder on the physical disk and not inside the bubble.  Can someone tell me what I did wrong here?  I have a similar script which creates a folder on the D drive for the linked clones and it works fine.  Thanks in advance!

  Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.

  With the help of isolation have merged, the application can read/write file on the physical machine.

• script to create the folder on the data store please

  Hi all!

  I'm having difficulties writing a powercli script to create a file on a data store... we have a mixture of guests ESX 3.5, 4.0 and 4.1, using data storage mounted via NFS.

  For work I do, I need to:

  (1) create a folder on a data store (check that the folder does not already exist).

  2) navigate to the folder

  (3) and check if a particular file exists in this folder.

  The problem is that the context of my current position makes the code does not. the get-location method returns "C:\temp\ESX", being the record that I run the test script to. I try to use set-card with various settings to try to change the location of a particular data store, but it does not yet work-get-location returns "C:\temp\ESX".

  I think that the code for step 3) above is ok, but I can't get any code to work for) 1 and 2).

  can someone please?

  Thank you

  Ross.

  You must use the vimdatastore provider to access your data warehouses.

  It is documented in vSphere PowerCLI Administration Guide, which is installed on the PC where you installled PowerCLI.

  You can use the 'normal' cmdlets to navigate, test and create folders.

  For example:

  CD vmstore:

  LS # will show the upper level

  CD MyDatastore\MyFolder # navigate with the alias "cd".

  test-path MonAutreDossier # check the existence of a folder or file

  mkdir test # create a folder

  I hope this helps

• PowerCLI script delete/create the snapshot in ESXi5.5

  Hello

  Last week, I upgraded one of my host of esxi5.1 to 5.5

  everythink works exepted one of my script powerCLI.

  On my host 5.5, I can't throw a snapshots of delete/create:

  Remove-Snapshot: 14/11/2013-13:45:37

  Remove-Snapshot

  Current permit

  or version ESXi prohibited the execution of the requested operation.

  At line: 1 char: 92

  + Get - VM | Get-Snapshot | Where {$_.} Created - lt ((Get-Date).) AddHours(-46))} | R

  eMove-Snapshot < < < <-confirm: $false

  + CategoryInfo

  : NotSpecified: (:)) [delete-screenshot], RestrictedV)

  ersion

  + FullyQualifiedErrorId: Client20_VMServiceImpl_RemoveSnapshot_ViError, VM

  ware.VimAutomation.ViCore.Cmdlets.Commands.RemoveSnapshot

  A feature has been remove en 5.5?

  Thank you

  I guess that's not possible. This has already been discussed in communities. Please take a look at this thread. https://communities.VMware.com/message/2211533

  ~ dGeorgey

• WLST Script to create the field of OSB with Oracle XE

  I installed oracle Service bus 10.3 with Oracle XE on a CentOS linux distribution. Everything went well. I created a default domain with the Wizard (so with Pointbase). Now, I want to go a little further. So I want to automatically create a domain OSB for Oracle XE. I used the following script (I borrowed from another thread ;-))):
  
  -----
  import sys
  
  Print "@ from the script...» »
  
  Try:
  domaintarget = "/ apps/bea/user_projects/domains/test2.
  domainUser = "weblogic.
  wl_home='/apps/BEA/wlserver_10.3'
  workshop_home='/apps/BEA/workshop_10.3'
  osb_home='/apps/BEA/osb_10.3'
  
  
  def configOraDB (dataSource):
  CD (DataSource)
  URL = "jdbc:oracle:thin:@localhost:1521:XE".
  Set ('URL', URL)
  Set('DriverName','oracle.) JDBC. OracleDriver')
  cmo.setPasswordEncrypted (domainUser)
  CD (' Properties/NO_NAME_0/Property/user')
  Set ('Value', domainUser)
  CD ('. /.. /.. /.. /.. /.. /.. / JdbcConnectionPoolParams/NO_NAME_0 ')
  cmo.setTestTableName ('dual')
  
  
  # Open a field template.
  readTemplate (wl_home + ' / common/templates/domains/wls.jar')
  
  CD (' Servers/AdminServer')
  together ('ListenPort', 7002)
  Set('ListenAddress','')
  
  
  CD('/')
  CD (' Security/base_domain/user/weblogic')
  cmo.setName ('weblogic')
  cmo.setPassword ('weblogic')
  setOption ('OverwriteDomain', 'true')
  writeDomain (domaintarget)
  closeTemplate()
  
  readDomain (domaintarget)
  
  
  addTemplate (workshop_home + ' / common/templates/applications/workshop_wl.jar')
  addTemplate (wl_home + ' / common/templates/applications/wls_webservice.jar')
  addTemplate (osb_home + ' / common/templates/applications/wlsb.jar')
  
  configOraDB('/JdbcSystemResources/wlsbjmsrpDataSource/JdbcResource/wlsbjmsrpDataSource/JdbcDriverParams/NO_NAME')
  configOraDB('/JdbcSystemResources/cgDataSource/JdbcResource/cgDataSource/JdbcDriverParams/NO_NAME')
  configOraDB('/JdbcSystemResources/cgDataSource-nonXA/JdbcResource/cgDataSource-nonXA/JdbcDriverParams/NO_NAME')
  
  
  
  updateDomain()
  closeDomain()
  
  
  except:
  dumpStack()
  Print "unexpected error:", sys.exc_info () [0]
  lift
  -----
  
  This creates a pretty empty field, as I have not yet created a real database. The command I found was
  
  loadDB ('10g ','wlsbjmsrpDataSource ')
  
  that will load the appropriate tables (of OSB/dbscripts /..)
  
  The problem is that I have no schema/user created in Oracle XE. So, I can manually create this but is not what I want to do. I also want to be scripted. So, how can I do this or is this not the way to go. You always manually create users on the database for three data sources (cgDataSource, wlsbjmsrpDatasrouce, cgDataSource-nonXA) before running a script to make a loadDB. Or do I run some kind of script create_user.sql or something.
  
  A second issue is that I can't find the scripts for the databases for cgDataSource and cgDataSource-nonXA data sources. They should be somewhere in workshop_10.3 but I can't find them. So, what is the problem here, I have to do a loadDB('10g','cgDataSource') or that eventually an error?
  
  My last question is I want to change the ALSB_DEBUGPORT (7 something) and debugging of the FMV of port (8453) in my script, how can I do this? I had another instance that already use these ports, so this won't work...

  My preference would be to invoke wslt by ant. This way Weblogic specific configurations can be addressed using WSLT and generic configurations (create DB users) can be done using ant.

  The files SQL to create tables required for the OSB are present in/MiddlewareHome/Oracle_OSB1/dbscripts/oracle. Try to run manually by using the Ant sql task. Create DB users is also possible using the same Ant SQL task http://ant.apache.org/manual/CoreTasks/sql.html.

  There are several ways you can do. I use http://ant.apache.org/manual/CoreTasks/replace.html as shown below in an Ant macro. Similarly, you can replace the ALSB_DEBUGPORT debug port and jvm debugging.
  
            
       
  
  
            
       
  
  
            
       
  
  
            
       
  
  
            
       
  
  
            
       
  
  
  Maury

• Message error "Windows cannot create the network map.

  I double click on my router for initiating the process of network card and I get the message...
  
  I did all the recommended solutions and everything is in order. Can not know why it is not mapped my network.

  Hello

  I only see the answer here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-functions-normally-but-Windows-cannot/849bdfc6-5c74-E011-8dfc-68b599b31bf5

  Thank you.

• trying to create a heat map

  I'm trying to recreate this kind of report and need some example code
  
  http://BP2.blogger.com/_F4cjbG7L4no/RyRmRZSz2vI/AAAAAAAAAAM/frAGvZrcyo8/S1600-h/linecalimage.jpg
  
  I need the table cells appear as color in function if the value is null or not null
  When the cell user mouse over, they should see some values.
  
  I tried all the options I could google and either, I get the colors or the passage of the mouse but not both.
  
  If someone could point me to a good example or browse for it, it would be great.
  
  Thanks in advance.

  Create views in your schema might like that...

  CREATE OR REPLACE VIEW V_HEATMAP AS
  SELECT
  CASE
  WHEN (t.COL001 IS NULL) THEN
  '
  '
  || ''
  || '      '
  || ''
  ELSE
  '
  '
  || ''
  || '      '
  || ''
  END AS demo_col
  FROM demo_table t;
  

  Add a SQL report page, make the source of State as:

  SELECT * FROM V_HEATMAP;
  

  Published by: cmcneil on March 24, 2009 15:35

  Published by: cmcneil on March 24, 2009 15:46

  Published by: cmcneil on March 26, 2009 13:36 - found the code :) tag

• I have created a form in Indesign. Is there a way to create the default text in a text field that displays the interactive pdf "insert text here" in the text field?

  I have created a form for the company, so that I work. It is a form that will be used in several offices and has buttons, drop downs and text fields. One of the text fields has a requirement that when the PDF file is opened, the text field has something written in there already, as an example (and one only) INSERT the TEXT HERE. I created the text field in Indesign and used the text tool to type in the area of the body-copy required. After that I have to export it as an interactive PDF, text in the text field disappeared.

  Drop-down lists give an option for a default choice, but I don't see a way to create default text in the Panel of buttons and forms for text fields. Is there a workaround or a hidden feature?

  Thank you!

  Set it in Acrobat.

• The menus on the master page widget does nothing for some reason any. The site map is successfully created. Help, please...

  I am new to Adobe Muse. I created the site map correctly. When I go to the master page and select the widget menu then horizontal, that nothing is happening. Need help to get this working.

  Hi Kiki,

  The horizontal menu of the widget library must be you drag to the area of the workspace.

  Kind regards

  Neha