Script to stop all instances of weblogic running on a box

Similar Questions

• Script to stop all databases running in the particular ORACLE_HOME

  Hello
  
  I'm looking for a shell script which would stop all databases running in a particular ORACLE_HOME, then start same accurate databases upward after a 'repeat all' was made.
  Other databases in the particular ORACLE_HOME not running and I don't want to start these. I want only to the stopping and starting again that these databases running in the particular ORACLE_HOME. Thank you.

  I want only to the stopping and starting again that these databases running in the particular ORACLE_HOME.

  Assuming that/etc/oratab is correctly configured and you are working on an already set ORACLE_HOME (otherwise you will need to fix it in scripts).

  $ cat shut.sh
  rm -f /tmp/actives.txt
  for SID in `grep $ORACLE_HOME /etc/oratab | awk -F: '{print $1}'`
  do
          ACTIVE=`ps -ef | grep smon | awk -F_ '{print $3}' | grep $SID`
          if [ "$ACTIVE" ]; then
                  echo $ACTIVE
                  echo $ACTIVE >>/tmp/actives.txt
                  export ORACLE_SID=$SID
                  sqlplus -s / as sysdba << EOF
  shutdown immediate
  exit
  EOF
          fi
  done
  $
  $ cat start.sh
  for SID in `cat /tmp/actives.txt`
  do
          echo $SID
          export ORACLE_SID=$SID
          sqlplus -s / as sysdba << EOF
  startup
  exit
  EOF
  done
  $
  

• script to stop the virtual machine

  I am writing a script to stop all the virtual machine as follows:

  1. The list of the VM

  VMLIST ='/ usr/bin/vmrun list '

  for a virtual machine in '$VMLIST '.

  do

  echo '$VM '.

  1. stop the virtual machine

  / usr/bin/vmrun stop '$VM' trysoft

  sleep 2

  fact

  But he failed, the news of the error:

  / root/vmware/Windows NT / Windows NT.vmx

  Error: Could not open the virtual machine: unknown suffixNT/Windows NT.vmx file

  the feedback by the command "echo $VM" is the correct path, but why it says file unknown?

  Please refer to the attachment.

  See if that helps...

  vmlist ='/ usr/bin/vmrun list '

  printf "$vmlist" | egrep '\.vmx$ ' | while reading vm; echo '$vm '.

  / usr/bin/vmrun stop soft "$vm".

  sleep 2; fact

• Change of date of BONE affecting Oracle instance? I stop the instance?

  Hi all
  
  I'm having a moment principal here. The SA is trying to change the OS date/time...how will this affect the instances of Oracle running on the box. ? Should I bring the bodies down, allows him to change the date (order date, I guess, this is a box of HR)... and then put it to the top...
  Or, I have to take it down at all... just give way and let the date command?
  
  TIA,
  
  Kelly

  Change of date of OS will change the SYSDATE on the database. If you have something that depends on SYSDATE, which could cause problems (i.e. If there is a process that inserts records using SYSDATE and the other orders of the date, you could get things out of order so time goes backwards). If you need to recover to a point in time during the window, you may need to recover a SNA instead of a timestamp. Other than that, it should be pretty safe.

  Justin

• Search for all Instances of script

  Hello, I was wondering if there was a way to programmatically use the find all Instances with scripts?  At the moment my work around is very slow, but works.

  I have a reference to a VI and I have my open project, then I want to find all the places that this VI is used.  For the moment, I get all the screws in memory (Application > all screws in memory), then for each VI I get all the SubVIs on the block diagram (browse the references).  Then for each Subvi in each VI in memory, I get the path to the VI and compare it to the path of the VI I want to find.

  As you can imagine it lasts too long.  Especially when I can click right icon of my VI and say find all Instances and apparently instantly get all 6 instances.  I searched for a while and could not know if it was possible, or how to do it.  Thank you.

  My attempt, called account only the number of times that the search VI is attached.

  Well, that was easy, don't know why I do not think that this.  In any case, I did a new VI that does what you mention and indeed it works much more quickly.  Attached is the enhanced version, in case anyone was interested.

• Windows Update 0x800A0046 error code. Have tried all the solutions proposed in all instances, including running MS Fix It. Nothing works.

  Have tried all the solutions proposed in all instances, including running MS Fix It.  Nothing works.

  Did you use this guide:

  http://www.bleepingcomputer.com/virus-removal/remove-smart-fortress-2012

• DEP stops all running programs

  Recently when I start my laptop about 5 minutes later, DEP closes all running programs such as exploer.exe, the curse client and everything in between. I don't think I've gotten the latest windows updates. I did not do anything to try to fix it because I've never dealt with DEP and all recently discovered when he stopped all my programs. Any help at all would be appreciated. I'll check the other questions and try some of them, if I looked and did not see anything that either close all programs stopped.

  Try this site:

  http://OneCare.live.com/site/en-us/default.htm

  See if it's the same mistake or not?

  And also try to run in safe mode and see if the same error will go up or not?

• Impossible to stop all the services of oracle R12 applications

  Hi experts,
  
  I installed oracle apps R12 on RHEL 5.2 box. and all is well wait you I can't access forms in mozilla firefox
  as he throws the java exception.
  
  but I even allow to stop all application services as I nee to restart my machine... I ran the $INST_HOMe/apps/PROD_appsserver/admin/scripts/adstpall.sh script and after:
  

  Enter the APPS password: 
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adapcctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adapcctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoacorectl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoacorectl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adformsctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adformsctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoafmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoafmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adalnctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adalnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adcmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adcmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/jtffmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/jtffmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  
  adstpall.sh:Exiting with status 8
  
  adstpall.sh: check the logfile /oracle/PROD/inst/apps/PROD_appsserver/logs/appl/admin/log/adstpall.log for more information ...  

  When I checked the log file that has been the result
  

  ........
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop
  Timeout specified in context file: 100 second(s)
  
  RC-50208: Exception  in method TimedProcessProcess.run
  Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: java.io.IOException: /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh: cannot execute
  script returned:
  ****************************************************
  ERROR :
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  
  [Service Control Execution Report]
  The report format is:
    <Service Group>            <Service>                                   <Script>         <Status>
  
    Web Entry Point Services   Oracle HTTP Server PROD_appsserver          adapcctl.sh      Failed
    Web Application Services   OACORE OC4J Instance PROD_appsserver        adoacorectl.sh   Failed
    Web Application Services   FORMS OC4J Instance PROD_appsserver         adformsctl.sh    Failed
    Web Application Services   OAFM OC4J Instance PROD_appsserver          adoafmctl.sh     Failed
    Batch Processing Services  OracleTNSListenerAPPS_PROD_appsserver       adalnctl.sh      Failed
    Batch Processing Services  OracleConcMgrPROD_appsserver                adcmctl.sh       Failed
    Batch Processing Services  Oracle ICSM PROD_appsserver                 ieoicsm.sh       Disabled
    Batch Processing Services  Oracle Fulfillment Server PROD_appsserver   jtffmctl.sh      Failed
    Other Service Group        OracleFormsServer-Forms PROD_appsserver     adformsrvctl.sh  Disabled
    Other Service Group        Oracle Metrics Client PROD_appsserver       adfmcctl.sh      Disabled
    Other Service Group        Oracle Metrics Server PROD_appsserver       adfmsctl.sh      Disabled
    Other Service Group        Oracle MWA Service PROD_appsserver          mwactlwrpr.sh    Disabled
    Root Service Group         Oracle Process Manager for PROD_appsserver  adopmnctl.sh     Failed
  
  
  ServiceControl is exiting with status 8

  How can I check the status of all services?
  
  any help will be appreciated
  
  Thanks and greetings
  VD

  Hello

  but I'm a new plan for oracle apps... can you please guide me on how to run the automatic configuration to stop all the services?

  You must run the script of adautocfg.sh under the INST_TOP/admin/scripts directory $.

  Note: 387859.1 - AutoConfig helps manage system Configurations in Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=387859.1

  Kind regards
  Hussein

• Firefox profiles are not very useful - all instances open with even a

  I'm using Linux: LMDE cinnamon Edition - 64-bit
  I use the version of firefox Mozilla Firefox 31.0

  I wish to have two instances of FF running. One with my standard, personal settings and a second instance that ONLY connects to Facebook and stop data leakage between the two. I can do this by opening up Facebook in another browser (for example, Chrome, or Opera).
  I checked the ProfileManager under Firefox and created a second profile called "FB".
  I can run firefox Pei FB and she opens an instance of FF with none of my personal settings available - that's what I was hoping.
  However, if I run a second instance of FF - for example the command-line firefox-p default it loads with the same profile as the first instance I opened, not the new profile such as specified in the command.

  I can't that choose the profile if there is no instance of previous firefox running under my user name. The first instance defines which profile is used for all subsequent executions - no matter what profile I specify on the command line. Even running firefox - ProfileManager start with Prime-specifie profile, Profile Manager.

  Hello

  If you want to run multiple instances of Firefox, you will need to add a - no - remote parameter to the command.

  For example:

  • Firefox - P-no-remote

  Please see:

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Try to remove duplicates, "show exact duplicates" check all instances of some songs

  I'm trying to remove the duplicates in my iTunes (in thousands) library. I view "replica", but for some songs, it checks all instances of the same song, so I can't delete checked without losing these songs in total. Is there a way to fix this, or what I have to go through the entire library of the song?

  Using the latest version of iTunes on a windows PC.  I read the instructions for the removal of duplicates, but my situation is not covered.

  Thank you

  If an entry in a list of audit checks another which makes me suspect that you watch a playlist in which the same elements have been added more than once, rather than the main list of music. The boxes are global in iTunes. One of the phases in my deduper script mentioned below clearly these duplicates of playlist, however, in its current form you need to run it on every playlist where you have this problem if only would you fix this type of problem. For the cleaning of the library to start with the source music in the view of songs and use exact replica. The current version requires counties to disk and the number of titles to match who I'm not sure was always necessary. If you don't see any duplicates that you would expect that maybe why.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > view > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• All instances of object in the master page

  I have a field of text at the top of my master page object. When the user selects from a drop-down list object, background color of the text box must change from white to green, yellow or red. I have created the script to the change event of the fall down and it works properly until a second page is created dynamically, as a result of text, the user added to other areas. How can I select all instances of the text field?

  Here is my script:

  Form1.Subform4.Table2.Row1.Overall[0]::change - (JavaScript, client)
  if ($.boundItem(xfa.event.newText) == "Green") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "204, 255, 204";//green color
  }
  if ($.boundItem(xfa.event.newText) == "Red") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "204, 255, 204";//red color
  }
  if ($.boundItem(xfa.event.newText) == "Yellow") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "255, 255, 0";//yellow color
  }
  

  Hi DKinsley ,

  I had a similar problem and solved in this way:

  You must change the JavaScript code in this way, you change all cases on each masterpage, where the element is inherited.

  In you case the code would probably look like this:

  Form1.Subform4.table2.Row1.overall [0]: change - (JavaScript, client)

  • If ($(xfa.event.newText) .boundItem == "Green") {}
  • xfa.resolveNode ("pageSet.NameofMasterpage [0].") OverallTop'). border.fill.color.value = "204, 255, 204; green color
  • }
  • If ($(xfa.event.newText) .boundItem == 'Red') {}
  • xfa.resolveNode ("#pageSet.NameofMasterpage [1].") OverallTop'). border.fill.color.value = "204, 255, 204; red color--> that is the same color as above
  • }
  • If ($(xfa.event.newText) .boundItem == "Yellow") {}
  • xfa.resolveNode ("#pageSet.NameofMasterpage [2].") OverallTop'). border.fill.color.value = "255, 255, 0; yellow color
  • }

  I'm not that good in coding, so maybe the code should always get running, but I hope it points you in the right direction.

  Best

  Dietmar

• Start & stop an instance RAC

  Hello

  I just created a 2 node 11 GR 2 database RAC, traditionally from databases not CARS I would just use sqlplus to start / stop the instance

  Q1. What is the recommended way to start / stop an instance in a RAC environment? Do you use a cluster to do command, or is sqlplus is acceptable?

  Q2. If you use sqlplus and more to stop an instance on a node, I presume that the cluster services is NOT as a failure and so don't try to restart the instance?

  Q3. similiarly what is the best way to start / stop a listener on a particular node?

  any help appreciated

  Jim

  Hello Jim,

  Q1. What is the problem with the status not reflected in the output of clusterware resource? Is it to do with the ability of Services to acknowledge a failure and restart the CLuster service?

  Response: The resource database is not parsed by SIR and if the database suddenly stops then none will try to restart the same.

  Q2. Regarding the automatic closing of a database in a CCR environment (as opposed to the manual method which I asked on-) if I simply turn off the cluster nodes of my will which in turn stops the Instances and close the database RAC itself (when the last Instance is closed)?

  For even if I turn on my knots, the first node start cluster, its instance and open the database?

  Answer: well, if you turn off your server then of course the database and stop anything else running on the server. When the server is under tension and if crs autostart is enabled then the clusterware stack will come with the server

  Q3. What is the difference between a Service and a resource of the cluster? Are the database, earphone etc services or resources? I'm just trying to understand why SVRCTL is used to manipulate the database and listener and not say CRSCTL?

  Answer: You can configure a service which is part of tree resources of database and the resource database is a parent for the same thing. Services are used to connect to the database. Database, (if added) services, asm, listener, scan etc are all the resources of the clusterware, which are monitored by the clusterware.

  You can refer to the Oracle documentation, which will give you more insight on these details

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16794/TOC.htm

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/TOC.htm

  Kind regards

  Vautrin - Oracle

• How to make a script to stop his execution?

  I am brand new to scripting in Photoshop and coding in Java, and I need help. I want to ask the user and if they say 'yes' I want the script to stop completely. If 'no', I want to keep it.

  Is there a way to do this? I've seen examples that look like the one below using 'return', and they all say that it will work. But what is the function, not the whole script stop.

  =============
  

  function EndScript() {}

  return;

  Alert ("this line will never run '");

  }

  var PromptUser = confirm ("do you want to stop?");

  If (PromptUser) {}

  EndScript();

  }

  Alert ("If the user clicks Yes, I don't want this line to be executed.");

  =============

  Is there a kind of statement that stops just everything?

  Thanks for your help.

  By definition, return leaves only the function you are currently, so you cannot leave a part of the script that is not inside a function. What you want to do is put the script inside a function and then just call back in the case. Such as:

  function Script() { 
  
      var PromptUser = confirm("Do you want to stop?");
  
      if(PromptUser ){
          return;
          alert('this line will never execute');
       }
      alert("If the user clicks yes, I don't want this line to execute.");
  }
  
  Script();
  

• Script to stop a list of virtual machines

  Hello world

  I'm working on an ESXi4 and I want to stop that all my virtual machines except one. So I try to write a script by changing a single witch stop all VMs.

  But it is difficult to do what I want and I'm not really good at the script .

  Please, someone has an idea, that write in this script?

  Kind regards

  Damien

  I think that an important question to ask since I think that many answers's on the "assumption" that you are using a licensed version (non-free) of ESXi, you're asking... sounds like you use a free version of ESXi, so not the API 'methods work like the use of vSphere SDK for Perl or PowerCLI.

  Please clarify this, if this is the case.

  I'll tell you it looks like you are using the free version, here's a script very simple which makes what you like, as if you need to extend the scope, you will need to modify it according to your needs and even once, you can use vimsh as a means of y to achieve.

  This script takes a list of exclusion (I hope that your VMS don't have spaces in their names, very bad practice) separated by a line break:

  for example

  ~ # cat exclude_list
  vm-1
  vm-4
  

  Let's say that there are 4 virtual machines running on an ESXi host: 1 vm, vm-2, 4 - vm and vm - 5 and you want to / stop all the virtual machines with the exception of those listed in the exclusion list.

  ~ # ./powerDownVM.sh exclude_list
  Issuing shutdown command to vm-2
          Unable to issue shutdown command, VM either does not have VMware Tools installed or someting else went wrong!
          Issuing hard power off to VM!
          Taking a nap for 10seconds
  
  vm-1 is excluded from power down!
  
  vm-4 is excluded from power down!
  
  Issuing shutdown command to vm-5
          Unable to issue shutdown command, VM either does not have VMware Tools installed or someting else went wrong!
          Issuing hard power off to VM!
          Taking a nap for 10seconds
  

  Attached is the script, make sure you set the correct permission on the script to run.

  For more information about vimsh and how it works, please take a look at these resources:

  http://engineering.UCSB.edu/~duonglt/VMware/#vmware_vimsh

  http://www.VI-Toolkit.com/wiki/index.php/Main_Page

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Remove all instances of a link

  Hello

  I have many instances of a link across a number of pages and I want to remove all of them without having to go to each page, select all and delete. I thought that there is a way using the links palette, such as right click on group link and "remove all" but it doesn't seem to be.

  The links is not a specific object applied style so I can't (I think) use the search/replace.

  Is there another way to get around this?

  Thanks in advance.

  (CS4 6.0.5)

  I made a simple script that does this - select an image with the selection tool (black arrow) and run the script - it should remove all instances of the binding. I guess you want to remove the images, leaving the frames containing the intact.

  Caveat! Just in case, save the file before running the script to be able to come back if something goes wrong.

  Kasyan

  if (app.documents.length == 0) ErrorExit("No documents are open. Please open a document and try again.", true);
  var doc = app.activeDocument;
  var links = doc.links;
  if (app.selection.length != 1) ErrorExit("Select a graphic frame with image", true);
  var sel = app.selection[0];
  if (sel.images.length != 1) ErrorExit("Selected graphic should contain an image image", true);
  var selectedLink = sel.images[0].itemLink;
  var selectedLinkPath = selectedLink.filePath + "";
  if (selectedLink == null) ErrorExit("Selected item doesn't contain a link", true);
  var allInstances = [];
  
  for (var j = 0; j < links.length; j++) {
       if (links[j].filePath == selectedLink.filePath) {
            allInstances.push(links[j]);
       }
  }
  
  for (var i = allInstances.length-1; i >= 0; i--) {
       try {
            var link = allInstances[i];
            var image = link.parent;
            image.remove();
       }
       catch(err) {
            $.writeln(i + " - " + err);
       }
  }
  
  function ErrorExit(myMessage, myIcon) {
       alert(myMessage, "Error", myIcon);
       exit();
  }