CUC - uses the model of eggs of 1000 users for users of 1100?
Hello world
According to http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/suppor...
If I select the model of the EGGS for 'Platform Overlay for up to 1,000 virtual users'
-Means that the user account and the mailbox in the UCA should not exceed 1000 UESRS?
If I have 1100 UESRS and very very low use of voicemail, I can still using this model of EGGS "CUC 1000 user?
Thanks in advance
Sam
Hello
According to my understanding, surpassing the number of users speciied in EGGS will not raise any errors. However, given that the product has been tested with some settings for optimum performance, exceeding the specified limit is not recommended and very probably is not supported by the TAC in the case of any performance issues.
Manish
-Does the rate of useful messages-
Tags: Cisco Support
Similar Questions
-
How and where can I find my Macbook Pro using the model number
How and where can I find my Macbook Pro "using the MODEL number" NOT the serial NUMBER please...
Hello world:
I would like to know more about my MacbookPro using model # is if there is a website or a program that I can type my model # so she'll tell me more on my computer...?
-
HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not
have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond
try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?
45fmj
Hello
Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.
Kind regards.
-
Create a target table by using the model of the ODI
Hi all
I am new to ODI. I'm try export table RDBMS for source RDBMS table at target.
If we create the structure of the target in the trg schema table or we can create using the model fit obi by selecting new data store.
Owb loading target tables is created and the data will be loaded.
Pls help me about this.
Thanks in advance.Hello
You can create it in the two ways.if you create using ODI data store, you must select Create table option target in flow during loading of the target. -
T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?
CS6 using
T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?
Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.
It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).
Question, am I suppose to create the right design in the large rectangle?
2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.
What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.
How to make the small rectangle in the large t-shirt too?
Hello
The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.
(1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.
(2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.
(3) select the small rectangle, and delete.
(4) use the Rectangle tool to draw a new in size.
5) option click on the new rectangle to open a launcher. Select make Guides.
You now have a guide again, larger rectangle! Let me know if you have any other questions.
-
Impossible to enter the title of the document when you use the model of two columns left navigation
I use DW 8, two columns left navigation model to rework my company Web site. My level of experience is probably beginner (known in Web design database and update existing sites; minimal associated style sheets).
From the model mentioned, I created a template for my business site and saved it as "template.dwt." Then, I created a new page using this template. I click in "Title" and type the title of the page, but it defaults to "untitled document".
I tried to follow the message thread of beachnut2 to "Model has locked the title of the document", but got lost. I followed the advice of Murray "create a new page. Save it as a template with FILE | Save as
Model. Look at the code. The code on this new model, I created is as follows:
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
"< html xmlns =" http://www.w3.org/1999/xhtml "> "
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
< title > Untitled Document < /title >
< / head >
My model based on the two-column template is as follows:
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
"< html xmlns =" http://www.w3.org/1999/xhtml "> <! - DW6->"
< head >
<!-copyright 2005 Macromedia, Inc. All rights reserved. ->
< meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
< title > Untitled Document < /title >
< link rel = "stylesheet" href = "2col_leftNav.css" type = "text/css" / > < / head > "
If I do the above tag looks like the blank template, I created, I lose the stylesheet link before the < / head > tag.
Any suggestions on how I can fix this?
Thank you for your quick response. I thought I had followed your instructions by creating a new document and save it as a template. The mistake I made was selecting a new basic HTML when I was selecting the new model basic HTML. This time, I got the correct tags, the copied on my model and it works now. Thank you for your help.
-
When you try to connect to my router using the IP address, he continues to ask for a password of windows security. I don't know what it is, I tried recording with every combination I can think. Can anyone help?
If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.
I hope this helps.
-
I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.
See:
http://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_160 0MHz_SDRAM
Get only the memory of a place as above, since Macs are picky about the memory. Another place is crucial.
If you can't swing for 16 GB (2 X 8 GB) replace a strip of 2 GB with a key of 8 GB.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
How can I use the "fnd_user_pkg.updateuser" package to disable users in bulk?
Hello
How can I use the "fnd_user_pkg.updateuser" package to disable users in bulk?
in EBS R12.1.3, oracle 11g.
Please see the request for information of the user
-------------------------------------------------------------------------------------
SELECT
SEPARATE
FU. USER_NAME
FULL_NAME EMPLOYEE_NAME
, TO_DATE (LAST_LOGON_DATE, "dd/mm/rrrr") LAST_LOGON_DATE, end_date, FU.start_date
OF FND_USER FU, PER_ALL_PEOPLE_F PERX
WHERE 1 = 1
AND PERX. PERSON_ID = FU. EMPLOYEE_ID
AND SYSDATE BETWEEN PERX. EFFECTIVE_START_DATE AND PERX. EFFECTIVE_END_DATE
AND PERSON_TYPE_ID! = 1118 - excluded candidates iRec
AND LAST_LOGON_DATE < = TO_DATE (December 31, 2012 ', "dd/mm/rrrr") and end_date is null
ORDER BY TO_DATE (LAST_LOGON_DATE, "dd/mm/rrrr") / / desc
------------------------------------------------------------------------------------
Concerning
Ngoyi
Hello
You need to do the opposite of what the code in the discussion below is:
fnd_user_pkg. UpdateUser - End Date remove users
Kind regards
Bashar
-
Hi is the model of puppet Monster red available for download?
Hi is the model of puppet Monster red available for download? Could you put a link... it is not the character animator 2 preview. Thank you
It is available in archive of character animator examples .
-
I want to use the chat to get a serial number for installation of Adobe Acrobat Pro DC. How chat with someone at adobe?
Hi robertr41760081,
Please follow this link Contact Customer Care, sign in using your adobe ID & click on the "still need help? Contact us"button to initiate a chat with our customer support team.
However, you can also find the serial key using this link https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html
Kind regards
Nicos
-
Performance-to-many problem (using the model of the FAQ)
After reading "HOW TO: post a request for tuning SQL - model showing statement" I gathered:
I have included some general information at the bottom of the post
The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.
SQL taking 160 seconds:
SQL in ~ 1 second or lessSELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (7, 1);
Or:... ab.channel_fk IN (7);
The purpose of the SQL is to return lines from table_a associated table_b (not in SQL) through the junction table table_a_b.... ab.channel_fk IN (6, 9, 170, 89);
The version of the database is 10.2.0.4.0
These are the parameters relevant for the optimizer:
Here is the output of the EXPLAIN PLAN of:show parameter optimizer; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- optimizer_dynamic_sampling integer 2 optimizer_features_enable string 10.2.0.4 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE show parameter db_file_multi; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- db_file_multiblock_read_count integer 16 show parameter db_block_size; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- db_file_multiblock_read_count integer 16 select sname, pname, pval1, pval2 from sys.aux_stats$; SNAME PNAME PVAL1 PVAL2 ------------------------------ ------------------------------ ---------------------- ------------------- SYSSTATS_INFO STATUS COMPLETED SYSSTATS_INFO DSTART 07-18-2006 23:19 SYSSTATS_INFO DSTOP 07-25-2006 23:19 SYSSTATS_INFO FLAGS 0 SYSSTATS_MAIN SREADTIM 5.918 SYSSTATS_MAIN MREADTIM 7.889 SYSSTATS_MAIN CPUSPEED 1383 SYSSTATS_MAIN MBRC 8 SYSSTATS_MAIN MAXTHR 1457152 SYSSTATS_MAIN SLAVETHR -1
For reference, the EXPLAIN PLAN when usingPLAN_TABLE_OUTPUT Plan hash value: 3781163428 ---------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1352K| 771M| | 60042 (3)| 00:05:56 | |* 1 | HASH JOIN | | 1352K| 771M| 27M| 60042 (3)| 00:05:56 | |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1352K| 11M| | 1816 (4)| 00:00:11 | | 3 | TABLE ACCESS FULL | TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""A"".""ID"") 2 - filter(""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7) Note ----- - 'PLAN_TABLE' is old version
that runs in ~ 1 second is:... ab.channel_fk IN (6, 9, 170, 89);
Here is the output of SQL * Plus AUTOTRACE, including CALENDAR information:PLAN_TABLE_OUTPUT Plan hash value: 794334170 ---------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 143K| 81M| | 58982 (3)| 00:05:50 | |* 1 | HASH JOIN | | 143K| 81M| 2952K| 58982 (3)| 00:05:50 | | 2 | INLIST ITERATOR | | | | | | | |* 3 | INDEX RANGE SCAN| C_M_INDEX | 143K| 1262K| | 1264 (1)| 00:00:08 | | 4 | TABLE ACCESS FULL| TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""A"".""ID"") 3 - access(""AB"".""CHANNEL_FK""=6 OR ""AB"".""CHANNEL_FK""=9 OR ""AB"".""CHANNEL_FK""=89 OR ""AB"".""CHANNEL_FK""=170) Note ----- - 'PLAN_TABLE' is old version
The TKPROF output for that statement looks like the following:SQL> set autotrace traceonly arraysize 100; SQL> SELECT 2 a.* 3 FROM 4 table_a a 5 INNER JOIN table_a_b ab ON a.id = ab.media_fk 6 WHERE 7 ab.channel_fk IN (7, 1); 1336148 rows selected. Execution Plan ---------------------------------------------------------- Plan hash value: 3781163428 ---------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1352K| 771M| | 60042 (3)| 00:05:56 | |* 1 | HASH JOIN | | 1352K| 771M| 27M| 60042 (3)| 00:05:56 | |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1352K| 11M| | 1816 (4)| 00:00:11 | | 3 | TABLE ACCESS FULL | TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access("AB"."MEDIA_FK"="A"."ID") 2 - filter("AB"."CHANNEL_FK"=1 OR "AB"."CHANNEL_FK"=7) Note ----- - 'PLAN_TABLE' is old version Statistics ---------------------------------------------------------- 10586 recursive calls 0 db block gets 200457 consistent gets 408343 physical reads 0 redo size 498740848 bytes sent via SQL*Net to client 147371 bytes received via SQL*Net from client 13363 SQL*Net roundtrips to/from client 49 sorts (memory) 0 sorts (disk) 1336148 rows processed
DBMS_XPLAN. Output DISPLAY_CURSOR:TKPROF: Release 10.2.0.4.0 - Production on Mon Oct 1 12:23:21 2012 Copyright (c) 1982, 2007, Oracle. All rights reserved. Trace file: ..._ora_4896.trc Sort options: default ******************************************************************************** count = number of times OCI procedure was executed cpu = cpu time in seconds executing elapsed = elapsed time in seconds executing disk = number of physical reads of buffers from disk query = number of buffers gotten for consistent read current = number of buffers gotten in current mode (usually for update) rows = number of rows processed by the fetch or execute call ******************************************************************************** ALTER SYSTEM SET TIMED_STATISTICS = TRUE call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.00 0.00 0 0 0 0 Execute 1 0.00 0.03 0 0 0 0 Fetch 0 0.00 0.00 0 0 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 2 0.00 0.03 0 0 0 0 Misses in library cache during parse: 0 Parsing user id: 21 ******************************************************************************** SELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (7, 1) call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.01 0.00 0 0 0 0 Execute 1 0.00 0.00 0 0 0 0 Fetch 2 27.23 163.57 179906 198394 0 16 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 4 27.25 163.58 179906 198394 0 16 Misses in library cache during parse: 1 Optimizer mode: ALL_ROWS Parsing user id: 21 ******************************************************************************** OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 2 0.01 0.00 0 0 0 0 Execute 2 0.00 0.03 0 0 0 0 Fetch 2 27.23 163.57 179906 198394 0 16 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 6 27.25 163.62 179906 198394 0 16 Misses in library cache during parse: 1 OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 0 0.00 0.00 0 0 0 0 Execute 0 0.00 0.00 0 0 0 0 Fetch 0 0.00 0.00 0 0 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 0 0.00 0.00 0 0 0 0 Misses in library cache during parse: 0 2 user SQL statements in session. 0 internal SQL statements in session. 2 SQL statements in session. ******************************************************************************** Trace file: ..._ora_4896.trc Trace file compatibility: 10.01.00 Sort options: default 1 session in tracefile. 2 user SQL statements in trace file. 0 internal SQL statements in trace file. 2 SQL statements in trace file. 2 unique SQL statements in trace file. 46 lines in trace file. 187 elapsed seconds in trace file.
Thank you for reading I'm waiting for suggestions to improve the performance of this statement.select * from table(dbms_xplan.display_cursor('474frsqbc1n4d', null, 'ALLSTATS LAST')); PLAN_TABLE_OUTPUT SQL_ID 474frsqbc1n4d, child number 0 ------------------------------------- SELECT /*+ gather_plan_statistics */ c.* FROM table_a c INNER JOIN table_a_b ab ON c.id = ab.media_fk WHERE ab.channel_fk IN (7, 1) Plan hash value: 3781163428 --------------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | Writes | OMem | 1Mem | Used-Mem | --------------------------------------------------------------------------------------------------------------------------------------------------- |* 1 | HASH JOIN | | 1 | 1352K| 1050 |00:00:40.93 | 198K| 182K| 209K| 29M| 5266K| 3320K (1)| |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1 | 1352K| 1336K|00:00:01.34 | 10874 | 0 | 0 | | | | | 3 | TABLE ACCESS FULL | TABLE_A | 1 | 2190K| 2267K|00:02:45.56 | 187K| 182K| 0 | | | | --------------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""C"".""ID"") 2 - filter((""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7))
-----
H3. Backgroud
There are many years my company made decided to maintain many-to-many relationships in our database using pipe delimited fields. An example of field value:
Each delimited value refers to a unique "short" code TABLE_B (there is also a real digital foreign key to TABLE_B, which is what I use in the junction table). We are regularly using these columns with the next SQL style:'|ABC|XYZ|VTR|DVD|'
Appropriate indexes have been created over the years to make this process as soon a possible.... WHERE INSTR(pipedcolumn, '|ABC|') > 0 OR INSTR(pipedcolumn, '|XYZ|' > 0 ...
We now have an opportunity to correct some of these errors of design and implementation of junction tables to replace the current field. Before that, we have decided to take a copy of a database to a client with the largest set of records and test. I created a new junction table:
And the analysis on a pipe delimited field, populated by this new table.TABLE_A_B DDL: CREATE TABLE TABLE_A_B ( media_fk NUMBER, channel_fk NUMBER, PRIMARY KEY (media_fk, channel_fk), FOREIGN KEY (media_fk) REFERENCES TABLE_A (ID), FOREIGN KEY (channel_fk) REFERENCES TABLE_B (ID) ) ORGANIZATION INDEX COMPRESS; CREATE INDEX C_M_INDEX ON TABLE_A_B (channel_fk, media_fk) COMPRESS;
I then compared the performance of the following SQL:
When x, y, n are values that occur less frequently in the TABLE_A_B.CHANNEL_FK performance are comparable. However once the frequency of x, y, n increases, performance suffers. Here is a summary of the data CHANNEL_FK in TABLE_A_B:SELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (x, y, n); -- Can be Many Minutes --vs. SELECT a.* FROM table_a a WHERE INSTR(OWNERS,'|x|') >0 OR INSTR(OWNERS,'|y|') >0 OR INSTR(OWNERS,'|n|') >0; -- About 1 second seemingly regardless
I noticed that whenever I use any combination of values that occur over approximately 800 000 times (i.e. IN (7, 1) = 780741 + 555407 = 1336148) then I get performance problems.--SQL For Summary Data SELECT channel_fk, count(channel_fk) FROM table_a_b GROUP BY channel_fk ORDER BY COUNT(channel_fk) DESC; CHANNEL_FK COUNT(CHANNEL_FK) ---------------------- ---------------------- 7 780741 1 555407 2 422493 3 189493 169 144663 9 79457 6 53051 171 28401 170 19857 49 12603 ...
I find it very difficult to accept that the old pipe delimited fields are a better solution (without taking into account any other than this search criterion!).
Thank you for reading this far. I really look forward to suggestions on how to improve the performance of this statement.
Published by: user1950227 on October 1, 2012 12:06
Table of link renamed in DDL.davebcast wrote:
The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.
Keep in mind that the enforcement timeframe has elapsed is a poor metric to use for benchmarking of SQL. The reason is that the same workload does not mean that the same elapsed execution time.
The workload for example shows a block of 1000 readings. There will be a difference marked by this workload reading data of the slow physical disks, or making this workload by reading data from memory in memory cache. And if it happens to be in memory or on disk is a kind of "random" thing (depends on many environment and factors of execution).
Thus, rather than measure the elapsed time and use it to compare, rather compare actual workloads. A workload of 500 block reading is faster and better than a block of 1000 DSL - despite the fact that a point of elapsed time can show the 500 read being slow (e/s physical) block a block of 1000 to read (e/s logic).
-
Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing
QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?
I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).
Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath. I have two pages, the 2nd page export perfect (a page break separates it from the first). On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page. It is not unlike the model I have, however, but with no photos. I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem. However, I like the wish of floating boxes to learn how to use them so that they "work".
I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).
I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page. I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).
Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page. I had to make sure the columns are too wide - they should be 1/4 "part we will tell. THAT APPEARED TO WORK. Pages exported and imported it point by point I was happy.
But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later). 'good work '. Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.
QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?
Thank you hope that your next print job loose its staples.
Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.
Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.
In response to your questions:
- If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
- It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
- Continue the first paragraph.
-
For example, I'll call you
DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External)
For a list of connected devices. The data in the table back looks like this:
cDAQ1Mod4/ai0 (etc.)
It tells me that I have a CompactDAQ chassis, which is good, and an analog module in the slot Module4. What I need to know is not just that there is an analog module in the slot to #4, but also of its ability (voltage, temperature, voltage, etc.) so that I can use the correct DAQmx task for this type of module. All this has to be discovered during execution.
Otherwise, I'll have to provide a configuration utility when the user program needs to determine which module is plugged that slot - and will it change by moving it to another location, you must enter these details again. I want to avoid this by making the material more discoverable as possible.
I can remember an API - and that is my hope.
* beep *.
Hello
I could understand the syntax for you. It's here.
Device blah = DaqSystem.Local.LoadDevice ("cDAQ1");
foreach (String dev in bla. ChassisModuleDeviceNames)
{
Label1. Text += "\n" + DaqSystem.Local.LoadDevice (dev). ProductType;
}This displays the model number of all modules of the cDAQ in the chassi. I hope this helps.
Kind regards
Perry S.
-
How to use the model instead of RP pspice to create the new component?
Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.
Fouda, salvation
I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.
If all goes well, you should start to see the results of the component. I hope this helps.
Best regards
Maybe you are looking for
-
Satellite A300-1RZ - stucks Windows 7 upgrade on the first step of the installation
Hi all I'm Italian, I an A300 Satellite with Vista Home Premium I paid 30 euros for the free upgrade to Windows 7, which reached my House yesterday. I got 2 DVD:-1 to 'prepare' my phone: * TOSHIBA UPGRADE DVD *.-1 upgrade operating system: * WINDOWS
-
Hi all 15 - n053sc is very fast and stable, I like it but...This is the first time for me with radeon GPU and I'm incredibly angry about its operation, especially for very low quality ati drivers, soI would like to ask if it is possible (do it myself
-
HP ENVY 7640 e All in One spring: printer - printing with locks on them paved preferences
I'm looking for help with my HP ENVY 7640 e-all-in-one printer. I felt the single best face of disorder and I went to the printing preferences and I see there's pad locks on all parameters. So if I select a preference to change it, it does not change
-
Hello, just bought and put in place a 204 Readynas to replace an old pc I used in flow of. Put everything in place easily and copied all my multimedia elements on the nas. My problem seems to be continuous from the nas to my WD Live box. Movies or sh
-
Recently, I decided that I will buy the W520 after the next update. I would like to know (as Google could not find any results) is the touchpad will allow gestures like 2 fingers to scroll, or pinch to zoom in?