Problem of black screen of HP HDX 16 display of 1160-United States

Similar Questions

• My problem is that I bought apple tv 4th generation of the United States. now I want to use it in India, where it is common to 220 volts, but in the United States, it is common to 110 volts. Can I use the apple tv in India?

  My problem is that I bought apple tv 4th generation of the United States. now I want to use it in India, where it is common to 220 volts, but in the United States, it is common to 110 volts. Can I use the apple tv in India?

  BBought Apple TV USA for my children in Europe (220V).

  No problem, just replaced the plug

• Unusual problem: partially black screen on the bottom right

  Hi all

  I would like to know what I can do to address these problems:

  I only had my Clip 4 GB zip drive for a month, and today I noticed after that him have plugged for charging for more than a day lower the right hand screen is black. The rest of the screen is fine, it's just this little corner of the screen that is like that! Partially black screen is triangular and always there.

  Another problem I've noticed is that I had it charging for more than a day, I expect to be fully recharged at the time where I unplugged, yet when I watched the news system, he indicated that power was '88% '. And then, when I was checked to make sure it read "77%", then again in '88% ' after I checked it once more. WTH is happening? Why the change?

  Oh, and I think that the firmware is up to date (not sure if this is relevant) because they say "Version: V01.01.20F" in the settings.

  In addition, there is a third question, I believe. I tried to reset by pressing the button of power for 20-30 seconds, but for some reason any, my drive is as insensitive to this, he starts just straight up / stops due to the initial pressure - i.e. function Reset does not work.

  Others that the three above, I have not noticed other unusual symptoms. I would be extremely grateful if anyone could give me any advice to solve this problem.

  Edit - I just noticed that when the drive is connected, he said 100% fully charged, but as soon as I unplug the 88% said

  Thank you.

  I would not be concerned about battery level indicator, as the Zip Clip is infamous for having been innacurate that.  Apparently better, if you want to know the exact charge: go to system info. screen (under system settings) and check the percentage of battery charge it.

  Troubesome more is the screen problem.  If I were you, I would try to manually reapply the latest firmware (see firmware upgrade thread sticky at the top of the forum).  If that doesn't resolve the issues, I would contact the seller and/or the SanDisk for a defective/warranty drive replacement.

  http://www.SanDisk.com/about-SanDisk/contact-us/

• Windows Vista, problem of black screen at startup

  original title: Windows Vista black screen problem

  I have a laptop that has an installation damaged Windows vista on it.

  When he starts from the (or should I say trying to start), it's just a black screen, with the slider makes this action of spinning, but that is as far as it.

  It does not start in safe mode

  It will not boot into normal windows is

  & When I run vista disc start Recovery option, he just said, is that the boot files are ok.

  I'm eager to perform a new installation of vista on it, but the label of product key on the base of the laptop has been damaged and is unreadable.

  Q. is possible to recover the product key of the installation that is damaged so that I can run a new installation?, (as I can't currently afford to purchase a license fee)

  Thanks for any valid help

  Craig

  If you can get it running, you can use these to get the PK:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it's a DVD of vista, using the options you can try a system restore; read the info below.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Problem of black screen in G62-361TX everytime I try to play videos online

  The problem is that my laptop screen goes black when I watch videos online (YouTube videos), but the laptop seems to be on (the WIFI and the Bluetooth lights next to the power button do not turn off). I restart my computer (hold the power button to turn off).

  Same problem when I play HD MP4 video on windows media player. But WMP reads the other normal videos without any problem.

  Problem with Windows media player was there from the date of purchase, I used to see the error message like "display driver stopped responding and successfully recovered" also not black screen at all, for the past 3 weeks I have the problem in the visualization of the YouTube video. Now no error message at all, that I can see a black screen.

  I have Windows 7 Ultimate (64 bit) and the drivers are up to date.

  When I search in the support forum, I have a suggestion, so I removed the battery pack and power cord, then I hold button power for 60 seconds, then I started my laptop. This time, it seemed as resolved, but the problem occurred after 3 days.

  Please help me get this problem is resolved.

  SSA

  OMG! I couldn't believe it!

  I've updated my BIOS for later and after a long wait, has solved a lot of problems.

  Here is the link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-92552-1&lc=en&dlc=en&cc=us&os=4063&product=4296702&sw_lang=

  I hope this will help many owners G62-361TX.

  Wish you all the best!

• Black screen when opening a game displays

  Recently bought a game called the "Gundemonium Collection"(CD ROM). "» This came with three games, "Gundemonium Recollection, GundeadGne and Hitogata Happa". Out of these three games only GundeadGne works perfectly. The other two games lead receive me a black screen where I can still hear my cursor movement and confirm/exit command sounds, but no visuals are provided. The final result is based on the windows key, do a right click on the program and its closure.

  Note: I tried to reinstall the game several times, screen resolution of setting, run the program in compatibility modes different, update drivers, install the latest version of DirectX and run the program in a minimized window. Pretty interesting when I reduce the program, the window is black, but I can move blue rectangle hollow (which I assume is a cursor) medium size when I do that I hear no noise at all, or if I can play the game.

  Thanks for any help you can provide.

  Morshu,

  It's really, really weird.
  Everything should work fine.
  All I can say is that you try to delete the parameters (gundemonium.sav and hhconfig.cfg) and rerun games.
  Who should ask if you want to run the game in full screen or in a window.
  Try the windowed mode, there may be a difference.
  In addition, you can try to install the game somewhere other than the default in Program Files, just in case.
  We have done everything that we can to ensure the compatibility, but we weren't able to test all possible cases.

  Also make sure that gdmdat.dat is in the folder Gundemonium Recollection and hhdat.dat is located in the folder Hitogata Happa.

  If you have additional problems, contact me at Sarah (at) wingdreams (dot) net and we can match this topic.

  Sara LEEN,
  Rockin ' Android, Inc..

• IBM Thinkpad T30 2367 has black screen after startup, also garbled display

  Tried to install the updated driver but can not pass a black screen

  FrankT.
  Try the elements in these post because they can get you operational return.  If it is not coming back.

  http://support.Microsoft.com/kb/318027

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  QQ learn manage!

• Start the computer to a black screen after the improperly installed display driver

  original title: display driver

  I installed the wrong display driver and now black screen when the computer starts

  Hello

  Start mode safe mode with networking.

  Go to the website and get the correct - driver download but don't install it yet.

  Control Panel - device - graphics cards - right click on the adapter Manager - UNINSTALL-
  Check the box - DRIVER to REMOVE when complete reboot safe mode.

  Now, install the appropriate driver.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L650D startup problem - only black screen

  Hello Experts,

  I have Toshiba Satellite L650D which is strange since the last few days.
  The problem is that it lights in general.

  Unlike other similar problems on the web, he won't go to the Toshiba start screen.
  Screen stays black! When I try first to power, I hear only a few sounds DVD player nothing else.
  When I try to reset it now button / stop for 30 seconds or more, I hear hard drive (or power) sound, but nothing happens.

  I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  . I am writing from the same laptop. If I stopped it now, it will still take me 30 minutes and many random combinations of hard reset to make it work.

  Someone suggested that the power output of the card could be a problem. can we check voltage output without fancy electrical appliance?

  Help, please. I can't afford new laptop right now.

  > I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  I'm afraid there's something wrong with the motherboard or the part connected to the mobo as RAM modules m.
  If you have not checked the RAM modules in the past, I'd recommend this as faulty RAM could affect the functionality of the laptop. In addition the RAM modules are not very expensive, so it s worth to check the following items.

  But please don t understand me wrong. I put t say there is a problem with the RAM. I said, this could be the troublemaker. So please don't be disappointed if this workaround solution would not help.

• Edge 2 - driver problems / random black screen

  I have a relatively new Lenovo Edge 2 a few months old.

  Problem I have currently: screen goes black randomly, but the light is always on, no mouse pointer, sound turns off too (similar to the hibernation perhaps?).

  I get a message at the beginning to the top there is a problem with one of the pilots. But when I check the drivers, everything seems to be up to date (its set to automatically in any case).

  I had a similar problem before, another message from pilot. The problem was that my laptop don't would not connect to wifi at less than the power mode has been totally exacerbated. Something about the laptop thinking its low in battery mode and the abandonment of wifi connection, I connected via electrician and updated the driver wifi I think and the problem solved. What is a similar problem? There seems to be a problem with this laptop and the sleep mode / low status for the battery maybe mode driver. How can I remedy this?

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• Problem of black screen of Acer V5 - 572 g

  My acer laptop start go blackscreen right after I turned it

  first of all, the acer logo with a few small balls circulating can be seen

  but after that, the screen went black and showing only the mouse pointer

  I tried to turn on or to turn off several times but nothing hapenned, the same questions keep arising

  any suggestion on what I should do?

  Hello..

  I suggest you check this problem by performing a power reset.

  To perform a reset of the diet:

  1. Unplug the power adapter for your laptop.
  2. Turn the laptop to remove the battery. Turn the computer over and open it.
  3. Press and hold power for 30 seconds, and then release the power button.
  4. Turn the laptop and replace the battery.
  5. Drag to the locking position locking tab.
  6. Turn the laptop again and plug in your power adapter.
  7. Turn on your laptop.

• Vista, update 4.9.218.0 (3140527 KB) for Security Essentials caused a problem starting black screen.

  Discovered this cause after several days using the Safe Mode and system restore to get the job of the computer. I couldn't uninstall it so I reinstalled a new version of Security Essentials, and this seems to have cured the problem.

  But this bad patch has "successfully" installed on my computer several times

  over several days last week and is always sent by Microsoft for installation.

  What is going on? Security Essentials will be polluted by him again?

  What should I do next?

  Hello cragusbe, you need to hide the update. It caused the same problem for many MSE Windows Vista users, maybe even all of them: http://www.vistax64.com/windows-updates/304379-update-microsoft-security-essentials-4-9-218-0-kb3140527.html

• Problem with black screening monitor

  My computer has started doing a few days ago, but whenever I play a game on my computer, it cut for a second put name brand monitors for a few seconds and then goes back to where he was. He did not stay in 4-5 years I got so far. Anyone know anything that can solve this problem?

  Hello Gavin,

  Thank you for your quick reply and for the information.

  I suggest that you check you connection VGA cable with the monitor as it could be faulty or loosely plugged in.

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Can someone please help an elderly person in layman's terms how the problem of FLASH PLAYER? Thank you very much, elderly person, United States

  I keep seeing that the version of FLASH PLAYER is updated; However, I can't have the additional UPDATES.

  Can you help an older person THAN the LAYMAN TERMS in it please how to make it work in Firefox?
  Thank you very much
  MissM

  Hello MissM, if you want to download the latest version of adobe flash player - it is 16.0.0.305 at the moment - in order to correct security vulnerabilities that have been found in the plugin, you can do on this site:
  https://www.Adobe.com/products/flashplayer/distribution3.html

  Click on the link "Download EXE to install" next to "Windows / Browser Plugin-oriented" in order to download the installer...