SE connect/disconnect Internet using a command prompt

Similar Questions

• Is there an online class to learn exactly how to use the command prompt which is quite through. OR y at - it clear a book that explains in detail for this? Who should I contact?

  I would like to know how to use the command prompt.  The nethodology type in the cmd prompt with the syntax and the Liposuction, in other words, the real return to a command prompt. I downloaded about evertthing I can find about this, but can't seem to put it all.

  My OS is Windows XP Pro sp3, lots of RAM, my address is * address email is removed from the privacy *.   I would like to take a rough online study if one is available if it is not too expensive.

  It really depends on what you mean by "to a command prompt."

  If you open a command prompt window (for example, in start > run > cmd > OK), you can enter a number of orders.  The list of available commands, including their syntax, is here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds.mspx?mfr=true

  You can also follow the links here:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds_o.mspx

  If you want to get more sophisticated - automating command-line tasks - you can start here: http://technet.microsoft.com/en-us/scriptcenter/default.aspx

• How to program a chkdsk using the command prompt?

  could someone tell me how to plan (for once only, not repeatedly), windows automatically fix file system errors and find the attempt to recover bad sectors, using the command prompt? I want to perform this check to my external hard drive when windows are on the boot sequence, not on the 'normal' environment for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hello

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  To the guest who is probably similar to C:\Windows\System32 >

  This type by replacing X with the correct drive letter.

  CHKDSK X: /f /r

  Where X: is the drive letter for the external drive - spaces after: and f.

  C:\Windows\System32>chkdsk X:/f/r

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to rename a directory by using the command prompt

  How can I rename a directory using the command prompt?  Say I want to change c:\Users\User c:\users\user utilisateur\Mes Documents documents.  How can I do this?

  I looked in Google.  Here's what I found.

  G:\data>mkdir dir1
  G:\data>dir /b
  dir1
  G:\data>rename dir1 dir2
  G:\data>dir /b
  dir2
  G:\data>What would I write for the data? And what would I write for b?
  

  C:\docs>ren c:\docs\1.txt 2.txt
  C:\docs>dir /b
  2.txtPlease give me an example.Rod Computer
  

  OK, I fixed it.  I did go in safe mode, go to documents, right-click on the file, select Properties, security, advanced, owner and change the owner.  And that's all.

  They don't call me computer Rod for nothing!

  Thank you

• Need help to fix a computer using the command prompt

  So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

  I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

  3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
  At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

  However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
  Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

  I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

  I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
  A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

  However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

  The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
  This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
  So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

  Is there something I can do? Someone has an idea of what could have happened?
  My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

  The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

  Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

  Hello

  Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

  @@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall your operating system:

  Here are the instructions Acer for recovery to factory settings, new condition.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  See you soon.

• How can I add a Web site to the popup blocker exceptions list by using a command prompt?

  I have a lot of users with Firefox 2. I need a specific web site to allow for pop-up windows if their Blocker is enabled. I need to be able to run this command in a script that runs from a command prompt when the user connects.

  I don't think that you can do.

  However Firefox 2.0 version use a hostperm.1 of text file to store the exceptions.

  See http://kb.mozillazine.org/hostperm.1

• Recovery, the system failure - using the Command Prompt

  Windows vista OS and windows does not load. Automatic recovery system active at startup upward. No solution known thanks to this tool, and when I try to use one of the system recovery tools, none of them don't function. I went in F2 start and checked to see if he recongnized HD for this.  I don't have a windows vista startup disk system has been preloaded on acer laptop. can't even go back to a previous restore point. I checked the memory and it is 100% good. I have firewall and norton 2011 full security virus, so I think not only computer has been infected.

  I started in 'safe' mode and tried to use the restore point - no luck. tried to go in windows in safe mode - no luck.

  How do you use 'command prompt' computer startup tool and get in windows vista? What can I do using command prompt to check on this failure?  Thanks, ej.

  Windows vista OS and windows does not load. Automatic recovery system active at startup upward. No solution known thanks to this tool, and when I try to use one of the system recovery tools, none of them don't function. I went in F2 start and checked to see if he recongnized HD for this.  I don't have a windows vista startup disk system has been preloaded on acer laptop. can't even go back to a previous restore point. I checked the memory and it is 100% good. I have firewall and norton 2011 full security virus, so I think not only computer has been infected.

  I started in 'safe' mode and tried to use the restore point - no luck. tried to go in windows in safe mode - no luck.

  How do you use 'command prompt' computer startup tool and get in windows vista? What can I do using command prompt to check on this failure?  Thanks, ej.

  Hey eacepay

  Download and create an ERD for starting a Startup Repair restoring the system etc.

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• Using windows command prompt that I use Linux terminal

  Hello

  I am beginner in windows and Linux. But even in being a beginner in Linux, I'm fascinated at how I could learn about IT and take control of my computer by using the command line.

  Recently, I worked in windows machines facilities for a program of validation and verification of certain network configurations. Part of it, I did it by command line, but there were things that I could not. It was to get information on certain configurations of the system. I don't remember exactly what it was, but my supervisor showed me a way to GUI to do. But my experience tells me that this command line is faster, easier and can be automated.

  The goal of this post is to ask the name of a book that will put me in the path of sitting in front of a windows machine, open the command prompt and do some work that I do.

  Could someone give me some advice? For now, thank you!

  PS: Microsoft could make an option by default in the command prompt and the VI editor.

  You can learn a bit watching here, without the need to purchase whatever it is--> https://technet.microsoft.com/en-us/library/cc754340.aspx?f=255&MSPPError=-2147217396

  This page explains how to read the entries on the above site: https://technet.microsoft.com/en-us/library/cc771080.aspx?f=255&MSPPError=-2147217396

  Note that not all of the commands listed are available in all versions of Windows.  If you enter any command in a command prompt window, followed by a /? you will get an explanation similar to that contained in the reference site of the command line.

  If you expand the links to the left (on the first site above), you will find a range of reference material, which most unfortunately is not applicable to public versions of Windows (for example, Windows 7).

• How can I configure the standard user profile in the impossibility to use the command prompt on windows7

  My teen age son knows how to get into the command prompt and use the computer as an administrator temporarily... How can I stop this?  It has a standard user account.

  On the flavors below, you must edit the registry directly by creating the value of HKCU\Software\Policies\Microsoft\Windows\System! DisableCMD.

  
   

  How to change the registry? I need more specific measures.

   

  Thank you

  Kathy

  This is not a trivial process for non trained. Also note that open a command prompt does NOT give your son of additional privileges unless he knows the password for an administrator account.
  Please note that if you skip any step then you may have a machine that won't start longer.
  1. Burn a CD to repair Windows via Control Panel / backup and restore.
  2. Test this boot the machine with her CD in the repair of Windows.
  3. Label this CD as "Repair Windows CD", then store it in a safe place.
  4. Start normally. Logging in as an administrator account.
  5. Create a Restore Point.
  6. Log in under your son's account.
  7. Click on the Globe to start, and then type regedit.exe and press ENTER. Enter the credentials of the administrator in case of dispute.
  8. HKey_Current_User\Software\Policies\Microsoft\Windows-access
  9. If there is no windows system key, create it:
     Click Edit / new / key, type system, and then press ENTER.
  10. Click on the key to the system.
  11. Click Edit / new / DWord, and then type the letters DisableCMD and press Enter.
  12. Double-click the DisableCMD value, and then type 1 in the data field and press ENTER.
  13. Try to open a command prompt. You should get a message of "deny".

• Not able to connect to Internet using Pocket wifi band has.

  Original title: why windows 8 recognize im usually online using a wifi Pocket 2 connected by usb

  Why used windows 8 recognize im connected to the net using a Pocket wifi 2. plugged into usb

  Hey Damo,

  Please report the problem to Microsoft Community.

  According to the description, it looks like that you can not access Internet in Windows 8.

  However, we need some more information on this topic.

  Please help me to answer these questions.

  1. what happens when you try to access the Internet?

  2. What is the brand and model of Pocket wifi 2?

  I have this link which should guide you in the right direction.

  Visit the link and try the steps mentioned in it and check.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Problems connecting to the Internet, and can not use the command prompts

  Hi I started having problems with my internet via wi - fi access, but all my other devices and other portable computers have no problem accessing it.

  I used videos online and other forums to try to solve this problem. I tried to use the "netsh winsock reset" command as an administrator but it comes up with access denied and I tried to change my permissions, but they have been created and are unable to change.

  I also tried to change my ipv4 and ipv6 in the command as well as manually typing in the system google dns.

  Is there something I'm missing I need to do?

  What brand / model of the laptop?

  There may be a recovery partition on the laptop that can be accessed by restarting > start typing the F11 key. If you do not have a cover on the unit, you will lose all your records.

  See FAQ Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Computer stops connecting to Internet using the Quicken or Google Earth software

  Original title": when you use Quicken or Google Earth software, my computer turns off when you connect to the internet, then I turn on the system and its fine until I try to use Quicken to update my files.

  I use windows xp and a gateway computer

  Hello

  1. you receive an error message when you try to use the software Quicken or Google Earth?

  2. have you made any changes to system settings before the show?

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  Perform a clean boot:

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 2:

  You can uninstall and reinstall applications (software Quicken and Google Earth) and then check if the problem persists.

  To uninstall a program click on the link below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2:

  This problem may also occur due to the infection of virus/malware on the computer, you can download and run a full scan using Microsoft Safety scanner and check if this is useful to resolve the issue.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  In case you do not have any software Antivirus on the system, then you can download Microsoft Security Scanner which is a free software provided by Microsoft.

  http://www.Microsoft.com/en-us/security_essentials/default.aspx

  Check the event viewer for any error message.

  http://support.Microsoft.com/kb/308427

• Pavilion p7-1222: cannot connect to internet using stock card Broadcom WLAN

  I have a p7-1222, which has been recently updated to Win10 64 bit. Since the upgrade, I've known little or no connectivity using 46.0.1 Firefox or Internet Explorer v 11.0.31 so you use ipconfig, I can ping my router and receive a very quick response. I have the Broadcom WLAN stock adapt with an era of 2010 driver who seems to be the current driver when I do an update. Is there a more Win10 driver for this card? Do I need a newer adapter which is compatible with Win10? What can I do to connect to the internet with a certain type of regularity? Thanks for your suggestions!

  Hello:

  If your PC has network Broadcom 4313 wireless adapter, I believe that this does not work so well (if at all) with W10.

  The only suggestion I can offer would be to see if the W8.1 driver provides an improvement.

  This package contains the Broadcom wireless LAN drivers that are required to activate the integrated Broadcom Wireless LAN Adapter into laptop computers supported running a supported operating system.

  6.30.223.267 Rev.A (September 17, 2015)

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72931.exe

  If this does not work, the best thing to do would be to get an external usb wireless network card.

  I use it on my 3 HP of the PC business office.  Works very well on the W10.

  http://www.Amazon.com/Linksys-dual-band-Wireless-N-adapter-AE3000/DP/B007ZLGXA8

• Problem connecting to Internet using WAP2

  I try to call a script in PHP using HttpConnection, I read articles here and using WAP2 accordingly, I can get uid as well and URL formatted correctly, now the problem is when I run the application on the device, he throws exception sometimes "Tunnel Failure" and sometimes he just waits long and returned with the connection timeout.

  Can someone point out what may be the reason? and what other way to do the same thing? I'm a developer, so I don't want to enter the program Alliance etc. to use BIS.

  Another question is how these Facebook, yahoo Messenger apps to connect to their network? Any explanation expertise?

  Thank you

  Vishal

  Hey

  Use this class to create the HTTP request. This should help you. He works for the internet service from Airtel.

  URL:http://www.versatilemonkey.com/HttpConnectionFactory.java

• Creation of the database by using the command prompt

  Hi all
  
  When I tried to create the database through comand prompt, up to the stage business nomount , that it went well after that when I published create database command
  
  The following error occurred
  
  * ERROR at line 1:
  ORA-01092: ORACLE instance is complete. Disconnection forced *.
  
  
  Help, please... I checked the log of alerts and I even google, could not find...
  
  Kind regards
  VAMSi.

  as mentioned above, changing the size of sysaux and longer system data file will solve the problem.

  also modify the undo tablespace or in name create pfile from your database or database script.

  hope this helps you.