Unwanted automatic reactivation of the Mode standby mode when it is connected to the Internet

Similar Questions

• Yoga 900 - do not wake up to the top of the mode standby mode when it is connected to an external monitor

  Hello world. It's just a message of public service regarding an issue I encountered. I found that my 900 Yoga do not "wake up" after he went to sleep when you are connected to an external monitor.

  I am connected to a HP 27VX monitor by a C of Type USB to HDMI adapter. I found that my Yoga wakes up without problem if the screen is off (power options disable the display settings), but he does not wake up if she gets to sleep when it is connected to the monitor. The question however is not that he don't wake up, the problem is that for some reason when it is connected to the monitor there's going to ever really sleep (slow flashing white light). I think it is the way of somehow when you try to go to sleep. When he enters this mode, the power led is white, and the only solution is power Yoga of the cycle. I don't know why he won't successfully to sleep when it is connected to a monitor, but my guess is a certain type of driver/hardware between the USB type C HDMI adapter and the monitor problem.

  I checked that everything works as designed when I am not connected to the monitor. My solution is to go to power options and turn on my sleep option (when it's plugged in) to "never". Not a solution by any means, just a work around so that all stakeholders (Lenovo, HP) understand how to work with the new port USB Type C. I hope this helps.

  Rob

  Lenovo support makes installation. I don't remember whether or not she has uninstalled the driver first. Sorry:)

• Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

  I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
  Operating system: Windows XP Professional Service Pack 2.

  He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

• Unwanted automatic reactivation

  Sorry recent post was at the wrong forum.  Should be on the desk not laptop.  Please do not take into account. /

  Sorry, bad advice.  Marking as resolved.

• Automatically log off the internet when the computer is idle for a few moments

  Why my computer (Vista) automatically disconnect internet when it is idle for several minutesand after downloading a file. The message that appears after downloading a file is something the performance data.

  Hi magicre,.

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Step 1: Disable the security software and then test to see if the problem persists. Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.
  
  Step 2:run Internet Explorer in mode "no Add-ons" and then check if the problem persists

  To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:

  1. click Startand type Internet Explorer in the box start the search .

  2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

  3. test Internet Explorer to verify that it works correctly. If problems occur always,try step 2

  If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem

  Optimize internet Explorer
  http://support.Microsoft.com/kb/936213

  (See method 3-2 in the link)

  If the problem persists,

  Step 3: Start the computer in safe mode with network and test it. To do this, follow the steps below:

  Access the menu options advanced start by turning on your computer by pressing key F8 beforeWindows begins. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my version of Skype 6.20 in iPhone6 unable connect and always in offline mode when trying to connect

  Hi have a wifi connection in my iphone 6 and I just updated my Skype. When I try to log in, I can't sign-in. I also tried to reinstall, but no luck. There are times that I can connect and status online, but minutes later it will go offline. During the online state, I also received end messages from my contacts. What happens to my Skype, any idea? I have updated to iOS. Someone has a similar problem? How did you solve this problem?

  Please advice. Thanks in advance.

  AAH... I found the solution. I just updated my iOS and he had it solved. So it was just a conflict with an older version of iOS. Problem solved.

• Surface Pro screen goes into sleep mode when it is connected even when put to execution and never Power Options sleep or screen dark

  It seems that the parameter is ignored.

  There is another hidden setting?

  Check your screen saver if it is always the case.  Happened to me and I have triple checked all my settings and my screen has been set to never when it is plugged in also.  Then I realized, there was an update and for some strange reason, some updates change your custom parameters and shows how to activate the screen saver and mine was set to 'white', which is what was causing my screen seem to be turned off... It was the screen empty screensaver, turn off the screen saver and... Alto... fixed!

• start the computer in safe mode and appearing automatically jump to the top of websites

  Original title: appearing automatically jump to the top of websites and to hear the mouse click as sounds radomly
   
   
  Microsoft community.
   
  I have essentially two problems in my computer.
  (1) since almost a month my computer automatically goes into safe mode when I pass it on or restart. So, I have to change the user account to come to normal mode.
  (2) in addition to this since 5 days I noticed pop-up program (exactly which is the site web news.net ) in the right corner of my computer screen and it comes with random noise (similar to a mouse-click) that I mentioned earlier.

  I guess this program automatically installed when I tried to download another program almost a week back.

   

  I tried to remove the program using Control Panel, but it is not in the Panel.
  Then I ran a Kaspersky internet security scan (license and currently updated version) that was installed in my computer and then I ran Microsoft security scanner and none of them could picked up a problem.
  So I ran computer more secure mood.
   
  When I tried to clean the boot. I noticed only with safe mode even if the clean boot dialog box appeared options such as ok or cancel orders are not visible or they are absent (or damaged). Here, because I couldn't do the clean boot function properly.
  And I always get that previously mentioned his pop-up at random.
  So I am worrying because this could be the virus and it can harm my computer or your identity. I really appreciate if you can help me in this regard.
  Thank you
  Kind regards.
  Charef

  Please keep us updated on the issue.

  Glad to know that the issue of pop-up got sorted.

  I suggest you try the steps mentioned in http://answers.microsoft.com/en-us/windows/forum/windows_7-system/computer-randomly-goes-into-safe-mode/15444b39-38f5-4f2c-ae2f-a87501ee72ab?msgId=a2eefafd-93c5-4d13-b63b-0fdad30ea2a5

  Let us know the results after trying the steps mentioned in the link.

• Disable the automatic reactivation after opening of the screen

  Hello

  is it possible to disable the automatic reactivation after the idle state by opening the screen? If so, how?

  Greetings
  Mr. Auer

  Hi, Matthias

  When the laptop is in sleep or Hibernate mode after the opening of the screen for laptop wakes up automatically and display will be automatically ON.

• Where do we control the automatic switch to silent mode at night?

  I use the Photon for months, but may doesn't seem to find the area that handles when the Photon passes silently.

  I thought that's custom battery mode. I put it to Custom battery saver, set hours off-peak hour from 22:00 and ends at 05:00.

  My alarm goes off at 5:30, but it sounds ever, even if I put it in the alarm set to do.

  I noticed that the phone automatically switch to silent mode around 21:00 and not auto will spend up to that 8 or from 09:00. I get frustrated and set it to ring when I first use the phone in the morning.

  Is there a file I need to change to get my time window in? It makes me a little nuts, lol.

  
  

• run the automatic configuration in test mode

  Hello

  How to run the automatic configuration in test mode?

  I looked adutilities document (Maintenance tools) but did not.

  Thank you.

  $AD_TOP/bin/adchkcfg.sh contextfile = appspass =

  Check the log file after the command is completed to find the information about the changes that Autoconfig will do if it is executed.

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• After standby mode Satellite L300 cannot connect to the internet

  Hello

  I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
  The only way I can connect again is to restart my laptop. Can someone help me please?

  Thank you

  Hello!

  I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.

  In any case, I think you should try to install the latest driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
  And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.

  Good bye