Second axes Z on CWGrapf 3d

Similar Questions

• AXE looking for networks

  Hello, I searched around, but did not find a lot of recent topics and none of the answers accurate:

  My internet speed seemed slower lately and when I click the wifi icon in the menu bar, the status change constantly "Wifi On" to "Looking for Networks.  It just keeps going back.  Is there a reason it does this?  It slows down things?  I recently left my Mac over my AX, but the signal is still listed as three bars, and it's always on my correct network.  I have never select the network or something like that.  I never noticed this problem before, but I don't know if doing things contributed to it or just a coincidence.

  Thank you!

  When I click the wifi icon in the menu bar, the status change constantly "Wifi On" to "Looking for Networks.

  The AXE is not ' Looking for Networks "... your Mac is" Looking for Networks.

  This message is normal and expected and should appear and be updated on every 3 seconds or more. It's happened since that you lit on your Mac first.

  The Internet might be slower... but 'search network' would not have something to do with it.

  What Internet connection speed is your package from your provider?

  How fast can you measure if your connect your Mac directly to the modem using an Ethernet cable connection?

  How fast do your measure if you are looking for your Mac about 6-7 feet (2 meters) from the airport and connect wireless?

• Chart axes assignment: performance difference between ATTR_ACTIVE_XAXIS and ATTR_PLOT_XAXIS

  Hello

  I use a graph xy with two x axes and the two axis of ordinates. There are two possibilities when you add a new record:

  (1) PlotXY and SetPlotAttribute (, ATTR_PLOT_XAXIS,);

  (2) SetCtrlAttribute (, ATTR_ACTIVE_XAXIS,) and PlotXY

  I tend to prefer the second method, because I guess that it is slightly faster, but experts say?

  Thank you!

  Wolfgang,

  At some point, there is always an active x axis, and so, even when you use method 1, it's really no different and no better than if you had done that:

  SetCtrlAttribute

  PlotXY

  SetPlotAttribute

  Whereas, with method 2, it is simply the next subset:

  SetCtrlAttribute

  PlotXY

  What you need to know which changes the active axis using SetCtrlAttribute is mathematically trivial (it will affect only future locations, no current plots), while the change of the active axis of an existing field is not negligible: all data field must be remapped, and the plot needs to be redrawn, among other things.

  Therefore, if you use method 1, it is really as if you were plotting twice: it draw you the first time with PlotXY against the person who is the active axis, and then you it draw a second time, when you call SetPlotAttribute, in case you are actually changing the axis of the plot and not just assigning the same axis.

  There is no compromise here. Method 2 is much better.

  Luis

• hide the grid axes secondary image export

  Hello

  I am trying to export images simplified graphics, with the hidden grid because it tends to do things to look messy. The thing is, when there are several axes, this option seems to be ignored on the second axis. Does anyone have an idea how to get around this problem?

  Thank you!

  Hi marc1uk,

  If you do not require the axis of the grid on your exported image simplified, then I suggest disabling the grid lines for the additional axis, which can be done by right clicking on the graph and the navigation tab of the scales. Under grid style and you can change the style of the grid by clicking on the image of a graph and selecting one of the three color options, the left-most being disabled the gridlines.

  After trying it for myself, I see no clear reason why it does not work. so I have to study the issue further away.

  If you want all the games the grid is visible in your program, you can, for now, look in the use of knots of property to disable and re-enable the grid that is the cause of the problem.

  Kind regards

• Find the area between the axe of waveform and time

  Hello.

  I have acquired a signal to 1ms rate. I recorded in a .lvm file, and now I want to calculate the area between the axe of waveform and time. So, it's a classic integral.

  So, I create a .vi separated with a module for reading measurement, but I don't know which is the right module of integration, in this case. I tried all the modules to integrate to find the area, but no good result.

  PS: I also want to display this area, hasurate, somehow, but it's secondary.

  Any idea?

  For the first part, we should look at your code and data.

  The second use the "Fill" option available for the plot which will fill in the specify box.

  Ben

• Creation of several DAQmx scales for the axes of accelerometer

  I'm having a problem programmatically create customized for analog input with DAQmx scales.  Here's the background.  We are trying to develop a small Triaxial sensor for monitoring the twitching (it's a student project, I'm an "Advisor").  We have a Triaxial accelerometer that puts off voltage proportional to the components X, Y and Z of acceleration.  The accelerometer works a 5v power supply, each channel being a 1.5 v (offset) bias and a gain of 0.3 v / g, with a 10% of variability of these parameters (e.g. gain varies between 0.27 and 0.33 v/g).

  One can easily read the three channels of acceleration with an NI USB-6009.  "Proof of Concept" originally, we were easily able to measure muscle tremors, but noted that the channels were certainly not calibrated.

  I designed a calibration procedure which was fast, reliable and reproducible, requiring that the X, Y, Z tension measurement when the accelerometer was held at six direction without moving - the whole process takes 15 seconds.  But then, I decided to 'smart' (always a bad sign).

  I have never used custom DAQmx scales, but thought "why not use the values of calibration for the axes X, Y and Z to programmatically set custom for the three areas so all scales is in units of"g"and centered around 0 g".  I've defined a "Triax" task in my project - if I manually entered the scaling factors deduced my calibration, axes read all between + 1 and -1 g (depending on orientation) then the sensor was motionless.

  But I can't figure out how to take the calibration data and assign programmatically to each channel its own custom scale.

  Here's some code.  This first Routine detects the Triax task stored in the project and ensures that the correct USB-6009 case is connected.  In its project work, I appointed the three channels physical ai0 ai1 and ai2 to X, Y, and Z, and together the voltage between 0 and 5 v - this code basically resets the scale for these three channels.  It seems to work correctly.

  

  The reason I do it is that I want to record these three channels using the standard Volt scale, I will use these tensions to run the Calibration procedure I developed to get through three and get the necessary parameters to the custom scale.

  Here's what I tried to create a customized channel X, Y and Z (the scales are named X_Scale, Y_Scale and Z_Scale).  I tried a number of things, it's just one of them, but I did have a success to get anything to work (to talk to avoid the errors of DAQmx).  Either way, if I get the scale factors 'manually', my accelerometer readings are, indeed, optimized between-1 and + 1 g.

  Some of this code may seem too complicated - do - me confidence, I tried to make it more simple, but there are all kinds of 'hidden hunting for witches' in some of these functions that "made me do it" this way.  But, of course, this does not work.

  Ideas and suggestions are welcome!  I will continue to work on it, of course (but, thankfully, I did not the device at home with me, if I get a little break...).

  "Puzzled" Bob Schor

  
  

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• SIL flashes once every 6 seconds mac does not start

  My mac book pro end 2011 running El capitan (not sure what version of El Captain) short charges a month ago, when my charger is broken... somewhere, I'm the charger at work now (after a month, it was completely empty until about 2-3 days ago), he would not start I can not reset nvram or smc as the mac won't even turn on.

  If without connecting the charger I press the power button or indicator, nothing happens, but if I connect the charger, then press the indictator of costs it market showing no charge as Whiteout pressing me the button power mac continues to try to start the ISL flashes on the left, the fan turns, there is a noise coming from the hard drive the screen is completely black and this is repeated every 6-7 seconds...

  I thought that it was because the battery was completely discharged so I let it charge for 4 hours the first day then for about 6 to 7 hours the second day then topic 2-3 hours on the third day it was yesterday, so I read a tutorial or something online that said to hold comand, shift, option, r, p and the power button at the same time for 10 seconds and then let it, and press the power button Yet once I did this, but nothing happened, it was in the same loop, then I repeated the process without holding shift it wasn't too then I held command, t nothing happens so in desperation I held the power button for about 10 seconds, the fan has started a lot of dust exploded and fun trotted it started normally then I ran a virus scan and a control of being using bit defender, nothing was wrong with the results of bit Defender, I will attach be check the results soon... all the while there was an X mark on the indicator of battery... then I restarted the mac and he returned to its previous state, I've tried everything to run back removed the disc hard cords battery cables and cd drive leads to the Board and tried to boot with various combinations of even (what I did the day I got the charger is working IE the first day, but two trials failed to produce results and my mac is back on the loop and I'm sick using a phone to post my question) , I am not able display the screen shots I ttok the activity monitor and the edition of text file that I saved with being check the results I copied both of them on my phone so that I am able to provide using any other method, I would really appreciate if someone can help me

  I found a way to solve this problem! This is only a temporary fix and it dosent charge the battery, but I can use the mac on AC only when it is plugged so that's how it happened the charger is plugged into the mac and socket is in the same loop as explained above, then when I remove the battery leads to the mother board or logic board do not know who , but one at the top, then the mac tries to start u see the Apple screen and then it turns off back. Then after a few seconds the fan starts and SIL flashes 4-5times and turns off, then starts again now, when I connect the battery cables again once (while the lights flash) now it starts perfectly and without brand X on the battery icon it shows not charging and the task kernel upward a big piece of my ram There is absolutely no free ram, I found the culprit core task and it is a process owned by the root, that it was something like coreutd I have strength that quitting smoking and the RAM is free as usual when I restart I have to go through all these things that I've done to start the first time and this time another process owned by the root with the task of kernel so I stop and ram is normal again every time I restart the ram is completely sold out

• iMac 27 in 2015, second screen

  This iMac will be compatible with a 23 and more aluminum Apple display as a second screen?

  With the adapter fitting.

  This description of the map answer my question:

  Use the adapter Mini DisplayPort to DVI to connect a digital monitor advanced, such as the Apple Cinema Display 20 or 23 inches, which includes a DVI connector.

• Use the second router to extend the network to Time Capsule

  I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

  I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

  Yes. That would be the basis of a network of mobile type.

  The key for a roaming network parameters are:

  • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
  • All other routers used in a network of roaming must be reconfigured as a bridge.
  • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
  • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

  If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Should not really which is the main in the roaming network.

  I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

  If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

• Notes crashes in the second each time I open it.

  Notes crashes evertime I try to open it. I tried closing, discount, etc, nothing works.

  Try to keep these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

• IOS 10.02: Phone/contact App suspended for a few seconds

  I'll have a problem in which whenever I go through contacts in the phone app or change any contact then iphone more 6s will hang for 2-3 seconds. I have IOS 10.0.2 will fix this problem but its not yet solved. My observation is that every time the application attempts to fetch/update of data in icloud then I'm having this problem.

  Any body had same problem?

  Hi there, ZshanTChawdhry!

  Thank you for using communities Support from Apple.  From your post, I understand that your phone app seems to become temporarily unresponsive when you edit your contacts. I'd be happy to help you!

  I have some troubleshooting I want to recommend. Before you begin, please create a backup of your iPhone, by following the steps described here: How to back up your iPad, iPhone or iPod touch

  Once your backup has been created, try the following steps, in order. Test after each step completed, stopping when the problem is resolved.
  

  1. Force to close the phone application, then restart it and return to the Contacts section. You can find a way to force close apps here: force a nearby app on your iPad, iPhone or iPod touch
  2. Restart the iPhone, as detailed here: restart your iPad, iPhone or iPod touch
  3. Restore iPhone to factory settings, following this article: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPhone as a new device (i.e. without using your backup, at least temporarily). You can register in iCloud iMessage, FaceTime and iTunes and the App Store using your Apple ID.

     If adding contacts does not cause the application to phone to become unresponsive, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• 3 beeps, 5 seconds silence, 3 beeps, etc change the memory did not help...

  Mac Mini end of 2012 running El Capitan

  With 3 beeps, 5 seconds silence, 3 beeps, etc, it's "no good bank."  I was using crucial memory, works fine until about a week ago when he is awakened from his sleep gave the order to 3 beeps.  Changed to original memory of apple, same, got crucial replacement memory, same 3 beeps...  I doubt that all the 3 series were / are bad.  What else could be?  Any hardware problem would give sequence 3 beeps?

  Probably the logic board is having some problems caused by the bad memory or another problem. I would certainly get extract in an Apple Store or service provider.

• no caller ID on a second incoming call on IPhone 6

  If I talk to someone, and someone else tries to call, I get a sound notification of this second appeal, but NO caller ID. Sometimes I do not even an option to swtich to the second call. Or, I have to let him keep a sound signal, or cling to the original caller. Why is this?

  Also, if I'm (although once in awhile), able to switch to an incoming call, I am UNABLE to return to the original call. Sometimes a 'swap' message, but most of the time, I end up hanging up everyone. so I ignored any second call when I am engaged in the conversation. It is a $600.00 phone that is apparently able to do everything, except what was originally invented for the phone. someone at - it a solution?

  I've not seen this. That your operator has had to say when you ask, they control the management of calls?

• My second Apple Watch I have couple as new or a back

  the right way to set up my second Apple Watch, nine or a back What's up?

  I use two of them.

  a Apple Watch is the first generation, and the second is 2nd generation.

  Hello

  You can configure as new or restore from a backup of your first watch, if you do not want to continue with the same settings.

  Follow the steps here:

  Use more than one Apple Watch with your iPhone - Apple Support