Second monitor to the left

Similar Questions

• Expand the second monitor to the left of the primary monitor instead of right

  Hi all

  I am looking for a response to a response that I have not been able to find on the internet.

  When I connect a monitor for the first time windows by default the screen extended to the right of the main unit.

  can I change this so that when I connect to any screen for the first time by default at the left of the main unit?

  Is there a BIOS or hardware profile or regedit who can do it is the case of the work based on the activity and when I change the offices that I have to for the first time

  Thank you for all the support

  See you soon

  Andrew

  Hello Andrew,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please follow these steps and check.

  a. Click Start, type to change the display settings in the menu start search box and press ENTER.
  b. click on "detect", then click and drag "Monitor 2" to the left to "monitor 1".
  c. click on apply and ok.

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions in these Microsoft help articles and check the issue.

  Reference:
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Connect a second monitor to the all-in-one desire

  Please forgive my ignorance on this subject in advance.

  I just bought a HP Envy all-in-One.  Model 23o014; Product F3E94AA #ABA.  I am running Windows 8.1.   I'm very happy with my purchase so far.

  I also bought an AOC E2470Sw monitor and want to connect it as a second monitor to the all-in-One.

  AOC monitor has a VGA (?-15-pin) connection), but also has two HDMI inputs.  I THOUGHT (with the agreement of my distracted salesman) that I could connect the two with a HDMI connector on both machines, but I get a blank on the AOC screen when I try.

  What I am doing wrong?

  Thank you

  Sally

  Hello...

  The HDMI connector on the base is an entry, not an output. For a second monitor, you will need to go with a USB to video card.

• A second screen on the left hand side project

  I have a second monitor connected to my laptop.  The problem is that it is on the left side of the laptop.  Unfortunately, it behaves as it would be on the right side.

  Is it possible to change this behavior?
  Thank you
  Dan

  I have a second monitor connected to my laptop.  The problem is that it is on the left side of the laptop.  Unfortunately, it behaves as it would be on the right side.

  Is it possible to change this behavior?

  Thank you

  Dan

  Hi Dan

  Click on the desktop and select Screen Resolution.

  In the upper section of this window, you will see a picture of each screen with numbers.

  Position of the mouse cursor on the image on the left and it turns into a cursor "hand".

  Press and hold the left mouse button and drag the image on the opposite side of the image on the right and the release of the mouse cursor.

  Click on apply and Test results.

  Concerning

• Satellite Pro A660 - extended monitor on the left?

  I have some trouble getting the extended screen (2) to be positioned on the left side of my laptop A660:

  I have my new Toshiba (thanks to his monitor, call Lap1) set to the right of my big external flat screen (Ext2).

  In the nVidia control panel, I have the options like in the screenshot, that allows the Ext2 sit to the right of the Lap1, which means that my mouse goes to the Ext2 on the other side (the right side) of the monitor Lap1...

  Is there a way to get the Ext2 and Lap1 monitors (see screenshot: http://i53.tinypic.com/i39myd.jpg) to the position of the switch for my Lap1 is extended to the LEFT with Ext2?

  Any help much appreciated!

  HL

  Hello

  > Is there a way to get the Ext2 and Lap1 monitors the position of the switch so my Lap1 by Ext2 is extended to the LEFT

  To be honest, I don't know if it's possible to m.
  I n t have a laptop but the A660 and the external monitor is also connected to this laptop. I use the extended so desktop but eat t n for this scope on the left side.
  But I have an Intel graphics card. Even if the GPU driver has been updated, the Office may be extended to the right only.

  But I managed to make my external monitor as the MAIN monitor and the laptop as secondary display monitor.

• Double monitor turns off the second monitor in the locked mode

  Hello

  We work in an environment of support and use the installation of two monitors. Win7 heard to have good management of these settings and easy-to-use features. However at some point, something that was great went troubled.

  We can use two monitors while working on it however just its coastline turns off the second wallpaper and screen savers set if necessary. I tried to look for any change in config, but in vain. Looking for answer now here.

  Thanking you in advance.

  Kunal Pathak

  There is no built-in way to change this feature. When it is locked, the screen will be black. There may be some 3rd party software that can do this, but it is not supported by Microsoft. Matthew Arkin - answers Windows - Windows Desktop experience MVP moderator - http://twitter.com/Microsoft_Cares
  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
  Need to send me an email? Click on my name, my email is on my profile page.

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• Automatically discovers the current image on the second monitor

  Hello

  Is there a way to get the behavior obtained with on photoshop lightroom, when you always want to preview full size on a second monitor?

  I like to do my work on the cintiq, but it is obviously not as good as my color monitor calibrated. Currently, I am having to perform a 'new window' for each thing, that I'm working and manually moving the calibrated monitor. Is there something out there that automates this process?

  Lightroom has it and it works fine.

  Photoshop a bit with his camera overview - but that sends the image to an iPad.

  Any other ideas other than my manual way?

  Thank you!

  Andres

  Use the Navigator (set to nearly full height) Panel on your second monitor. The browser panel is part of the workspace and remains in place.

• Slow overview on the second monitor

  Hello

  I use two monitors with LR5, and the second monitor is the preview screen.

  I find the Preview on the second monitor to be very slow in the library and put modules:

  (1) if I'm the develop module, and I move to the next photo and zoom in the preview to 100% (or if it is already 100%), it take a minute, literally, for the preview appears correctly.

  (2) in the develop module, sometimes the display updates not well at all. If I adjust a slider on the Details tab, however slightly, the preview then updates almost immediately.

  (3) window in the library module, if I pass the main window to the single photo view and 100%, then, as I quickly browse photos, updates of the main window, but the preview is late.

  I work with Fuji RAF X-Trans files and maybe if the question? Updated jpg files almost immediately in the preview window in the two modules.

  Does anyone have a similar experience?

  Mike

  Sounds like this problem:

  http://forums.Adobe.com/message/5718586?TSTART=0#5718586

• Change the colors of the images between monitors while the user interface remains the same

  Hey! Im having a problem where photoshop change colors when I move the window between my monitors, see here: http://sta.sh/04y5s60vf3j is not due to the monitors themselves being different, it does actually change after a few seconds to move inbetween the monitors. The left was callibrated with an elite group of spyder 3 I do not have access to. I applied the file with windows instead of the utility of spyder color management. The second is new, and it is not callibrated by what that is, but instead was done by hand with integrated RGB brightness/contrast/custom settings. Two of them are very close to eachother, so enough for my taste. but when photoshop changes which looks like the image, it is causing problems. Curiously, when I disable calibration of the screen on the left, the image doesn't change color between monitors, but instead always appears as it does on the right. but then they do not match to the top and all the screen looked washed out because it's uncallibrated, so that won't do me any good. Something else interesting to report, is when this image is saved as a. JPG and read with firefox, the image appears exactly as the monitor on the LEFT (which is my primary monitor) despite the monitor left which is the force has changed. does anyone have any suggestions? It also appears that photoviewer windows behaves in the same way, although firefox does not work. Meaning when I open an image in all 3 on the left monitor, they look alike, but when opened on the right monitor, windows photo viewer and photoshop both display the image such as the brighter and redder that firefox works. It's frustrating, because it seems that photoshop changes the image with my measured on my monitor left to match what it looks like on the web, it does. but it does not for the monitor right, or the left is uncallibrated. Another question, I can see with this is even if the user interface is the same shade of gray, the images are different between the monitors because of this change. Does anyone have suggestions?

  -BD

  What you need to understand, is that Photoshop converts the image data, the document profile for the display profile, independently for each display. It is a managed pipeline standard color display. Windows Photo Viewer does the same thing (but do not have a lot of other applications).

  When you move a picture on the screens, it snaps when you drop; as the new display profile is picked up.

  Calibration is only partly about changing the monitor's response. The second part a profile, which is a complete description of the screen in its calibrated State. Then a conversion of standard profile is performed as he goes to the screen. The profile has a much higher level of accuracy than the single calibration.

  ---

  If the image on the web has the stripped document profile, Firefox with default settings does not have this conversion and sends just the unchanged data to display. In other words, it is not color managed. This behavior can be changed, but get your first straight base display profiles. Unless you get a new calibrator it is no that you can do to match these two views.

• Select vga for second monitor

  I am trying to add a second monitor, but it does not receive a signal.

  With the help of HP Paviion Elite HPE 210f running Win 7 64 bit. It has an ATI Radeon HD 5450 graphics card. I have been using a single monitor DVI-d port for a long time without any problem.  Now, I want to add a second monitor. The VGA port has a plastic screw top Cap. I removed the plug and plugged into the monitor. He doesn't get any signal from the computer. I tried to update the graphics driver that caused a blue screen. Restarted. Monitor main always ok, but nothing on the 2nd monitor.

  Tried running the Catalyst Control Center. Graphic material tab to the main Board, it shows the graphic Chipset is ATI Radeon HD and all other info says "not available".  In the software Graphics tab, it shows

  2D 8.01.01.1186 driver version

  The 2D driver file path is not available

  Direct 3D Version 7.14.10.0860

  Open GL version not available

  Version of Catalyst Control Center 2009.1201.2247.40849

  I have to do something to activate the VGA port?  This video card supports two ports/monitors?  I tried to look on the AMD website, but did not find anything specific to this topic.

  Moreover, the primary monitor has a VGA cord plugged into an adapter into the DVI port.  Not sure if that makes a difference.

  Here are the specs of your computer HPE-210f. Please note that DVI and VGA ports, which adjoin the rear USB ports are "blocked" for a reason. These video ports are disabled, because the ATI Radeon HD 4200 integrated graphics on the motherboard is disabled when a graphical supplement, as the included ATI Radeon HD 5450 card with your system, is installed. Only two ports that can be used are the DVI and HDMI in one of the slots of expansion above the back of the I/O shield. Please note that the DVI port can output digital (natively) or analog (using an adapter DVI / VGA) and the HDMI port can produce only digital signals. In all cases, one or two monitors must support digital signals.

  

  

  Frank

• When I click on a particular bookmark it opens in a window in the same page of the browser which is open, but on the left side while I open two URL dirfferent

  I'll have to page open in the browser, and when I click on a particular bookmark it always opens in the same browser, but as a second page on the left side of the page. How can I stop this from happening - there is apage that I need to visit often for business and it is very limiting.

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.

  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Cmd + B on Mac).

  In the Bookmark Manager (bookmarks > organize bookmarks) you can click on the button more in the lower details pane on the right.

  Make sure "Load this bookmark in the sidebar" is not selected.

• Can I use a view of Pro older Mac as a second monitor on my iMac27. How can I set up?

  Can I use a view of Pro older Mac as a second monitor on my iMac27. How to set up the second monitor in the system folder?

  What exactly is the screen to which you refer?

• Can I use a Pro older Mac as a second monitor display on my iMac27

  Can I use a view of Pro older Mac as a second monitor on my iMac27. Is it as simple as make a DVI adapter Thunderbolt and selecting the second monitor in the system folder?

  Ron

  A Mac Pro doesn't have a built-in screen.

  If you mean a stand-alone monitor used for a Mac Pro, only if it can be connected to the iMac.

  If you want to tell screen integrated a MacBook Pro, only with a product such as ScreenRecycler. All these work on a network.

  (138770)