second tween does not expect to finish first

Similar Questions

• My printer is connected to two computers. I find that the second computer does not print unless the first computer is also on. Can I get every computer to print without the two be on?

  the printer has been first on windows 7 and second on windows xp, because that's the way I was told iy had to be done. But I thought that each computer can print separeately withou t windows 7 being on.

  Hello

  1. How is the printer connected? This printer is on a network?
  2. this configuration was already working before?

  You must configure a print server. If your printer is a network printer, you can connect it to a router, and all computers connected to this router can use the printer individually. If the printer is not a network printer, you can buy the equipment to turn it into one.

  See the articles below for more information:
  http://support.Microsoft.com/kb/308028
  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  I hope this helps.

• Why is my second screen does not work - it starts with my main screen, but then turns off.

  My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

  When I go into the control panel and the view tab - the PC does not recognize the second monitor.

  GEO...

  It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

  Now fixed.

  TKS for the entry.

  GEO...

• Extensions Manager does not come with Adobe first CC trial?

  Hello

  The extensions Manager does not appear with Adobe first CC of the trial?

  I like to add the plural eyes 3, can someone help me?

  Thank you

  Georgia

  Please try: https://helpx.adobe.com/x-productkb/global/issueswithinstallingaddonsCC2015.html

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• 2nd tween does not

  Can someone explain why the following interpolation in the main timeline Frame2 does not work? The 1st works very well.
  
  Frame1
  var twMoveClip:Object = new Tween (this.mcMenu.mcB, "FLF", Strong.easeInOut, 0, 196, 20, false ");
  twMoveClip.onMotionFinished = function (): Void {trace ("finished"); delete twMoveClip ;}}
  
  Frame2
  var nY:Number = this.mcMenu.mcB._y;
  var twMoveClip:Object = new Tween (this.mcMenu.mcB, "FLF", Strong.easeInOut, 0, 196, 20, false ");
  

  As kglad suggested, you could put your statements to import on other frameworks or you could re - write the code to look like this:

  This defines a function that you can call with various parameters allowing you have to press on the first image import declarations.

  Tim

• Tween does not

  Edit - I realized that I do not show an essential part of my code...
  
  Import mx.transitions.Tween;
  
  what I am doing wrong? the "dynaText" clip is attached, he gets the string inserted in it, but it is not melted as I want using the Tween class.
  
  Furthermore, although the script does not get that until now, the next part below it looks it will not work either. I would expect onMotionFinished to change color in my actionscript Editor, since he is an identifier... but it doesn't. I do the first part of work to see if the yoyo function will work, but it doesn't look like it will be.
  
  can somebody square this away for me?
  
  
  

  Try to use an embedded font.

• UMI-7764 second axis does not

  I have a strange problem with my installation of motion control OR and I was wondering if someone could help me.

  I have the following configuration:

  PCI-7330 connected to an UMI-7764

  Connected to the UMI-7764 I have two drives of P70530 stepper, themselves connected to two engines step by step from Nema-23 with encoders tree wired to the UMI-7764. While following the manual.

  The switch "Inhibit the entry" is set to active top and switch "Output Inhibit" is set to active low.

  The two discs P70530 initialize (solid green LED). The step by step and the engine performs on the terminals of the 'axis 1' of the UMI-7764 works very well. The other, performs on the terminals 'axis 2' does not work. When I try to run a query through MAX, the engine hear "click" once and then disengages. The reader is then a flashing green LED.

  The engine will stay disengaged until I try a movement in the opposite direction, how the same 'click' is heard and the motor is now engaged. No movement other than the vibrations caused by the engine engage/disengage occurs.

  Readers and encoders are wired identically in the UMI. I had the cables with the player that works as well as the discs themselves and even engines. The result is always the same; training/cable to 'Axis 1' engine works fine and 'axis 2 ","clicks"but does not move.

  I would like some advice or suggestions anyone can provide, please.

  After going back through all the threads, once again, I finally finished by checking the list of pins on the P70530 drive - > UMI-7764 cable.

  It turns out that I had the wrong cable on the second axis. Part number 198151-2R5 instead of 198141-2R5. D - SUB connectors they are identical but different pinouts. After mapping the pins to the correct UMI axis terminals 2nd screw works now.

• Cluster of Boolean controls does not expect update

  Hello

  I'm confused about the following question: in the joint Test Cluster of Boolean controls Functionality.vi, I have a Boolean controls group, some disabled and grayed out, other permits. If I click on one of two Boolean controls permits, and then on the other hand, I want the Boolean selected first control to False. Update Cluster indicator shows the desired behavior. What confuses me, is that the new value does not update accordingly. When I clicked at least once on two Boolean values, the new value remains [TRUE, TRUE] at all times, and the structure of the event runs.

  I have a work around, as shown in the Test Cluster of Boolean controls feature Workaround.vi, but it looks like 'Nice' no, because it's more complicated than necessary. Anyone know why the new value refreshes as expected? Please notify. Thank you.

  Best regards

  Peter

  Here is a simple solution.

  Of course, you can use a container of radiobutton instead of a cluster for simpler code. Try it!

• ' Date/Time To seconds' function does not respond to the "split second" entry

  The function "Time in Seconds" (contained in the Function\Programming\Timing - range) does not meet the "split second" entry (see example).

  Hi Reimar,

  as I do not see your example I can only say: it works as expected:

  

• Click event does not work for the first choice of object field index

  Hello

  In my application, there is a ObjectChoiceField inMainScreen

  I want to get change Listner of ObjectChoiceField after clicking on index 0. When I am clicking on the second element of the choice field, I am able to move to another screen. But for the first selection of the element, it does not move on the screen.

  if(field == mOcfVehicle)
              {
                  Logger.out("MyProf", "vehicle choice field touched ");
                  int index = mOcfVehicle.getSelectedIndex();
                  Vector vecVID = store.getVehicleID("VehicleID");
                  final String strVehId = vecVID.elementAt(index).toString();
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
  
                      public void run() {
                          // TODO Auto-generated method stub
                          UiApplication.getUiApplication().popScreen(MyProfScreen.this);
                          UiApplication.getUiApplication().pushScreen(new AddNewCarScreen(1, strVehId));
                      }
                  });
  //
              }
  

  Please help me...

  Here it happens little differently. I explain the requirement properly. Suppose that the I am A screen where I have the ObjectChoiceField. I added a choice of X. Now, when I am pressing on the field of choice and selection, it must pass on the screen (B) but that the choice of the field is choice (X) only one, it is not mobile. Now if, after the addition of the choice of two X and Y, if I select go, it's going to screen B. But when again, the field of choice has 2 options X and Y with X as the default selection. There is therefore no chance for me to choose the X.

  Therefore, I have added a Select called default choice. Now, if X is added, field of choice is the choice of towing display: Select and X. And while choosing X, it moves on the screen B.

  Hopefully now, it is good for understanding.

  And can help me please to this: http://supportforums.blackberry.com/t5/Java-Development/How-to-on-the-Camera-Flash-for-a-long-time-l...

  Thank you.

• Any Composition AE (dynamic links) and a text does not appear in the first (CS4)

  I have an AE comp I did with a few credits a few weeks which was 20 seconds ago. Now, I go back to edit it - done long 52 seconds (Comp changed settings), I increased the length of each text box appears a little longer; then I also copy & paste a text layer and put it between the 2nd to last and the last layer of text.

  Then I go and copy/paste about five more layers that all go behind what I had before - in my AE comp I also put the other. I edited all the layers of copied text and type in all that much good.

  I have a background with text on top of that. The background is precomposed and then all text layers in the final composition.

  When I go to the first I see * some * of the changes immediately.

  When I go to the for first now to watch, all changes are applied until the last layer of text I've had since a few weeks ago - including all changes made to these layers as length, font and size, as well as the text layer, I put between the last and the 2nd to the last layer.

  But that's it - once the last layer before is played, no layers of text appear, but the background is perfectly well yet, everything as it should.

  In AE, it plays well and looks great.

  What I am doing wrong? How can show in AE but not first - if the background shows?

  I went to the AE and has one of the layers of this latter text to see what he would do in the body and he hid the background well, but the text still does not appear in the body but in AE.

  Police is still - Adobe Caslon Pro

  My system:

  Windows 7 Pro (64 bit)

  Intel Core i7 980 X 3.33 GHz

  Drive system 750Go

  2 TB disk Media

  12 GB memory

  GeForce GTX 470

  Running Adobe Production Premium CS4

  AE version 9.0.3.8

  Body version 4.2.1

  Any idea would be appreciated!

  Thank you!

  Delmar Penner wrote:

  I changed it to the 3D and moved a few around closer - watched from top, right, left, back... Yes, all the different points of view and could not see anything wrong.

  In fact, the need to use the 3D is not very apparent in this model.  I would use 3D unless there was a reason to do so.

  Delmar Penner wrote:

  ... everything up to "Other credits" do not appear...  I noticed that there is the kind of grid with the blue symbol just in front where I name the layers - what does it means? It's all those who do not have their appearance... Any connection?

  Indeed it is!  Did you by mistake guide layers, not the text layers.  Here is their description:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS3878526689cb91655866c1103906c6dea-7e76 a.html

  .. .and here is more about them:

  http://community.Adobe.com/help/search.html?q=guide%20layer&HL=en_US&LR=en_US&l=AfterEffec ts_product_adobelr & site = aftereffects_cs5_all & auto = 1 & Filter = 0

• RAID-1 failed, the second drive does not start in RAID

  I bought a Dell 531 running Vista with RAID1 set up on two 300 GB drives.

  And that works very well... but then the first disc got a bad place.

  Ideally, I could unplug this drive and run the other player;

  However, the second disc has a RAID boot sector!

  [he has a normal boot sector, so if I plug it into the unused (non-RAID) SATA-3 slot, it will start]

  Should be no problem, just start the recovery DVDs and let Vista install a good start...

  But NO!  The DVD version does not see the drive.  (I tried to load the sataraid drivers, no joy)

  Note: if I have the drive failed in the RAID and the second drive in SATA-3, it starts to SATA-3.

  If I put the two drives on the RAID, it starts on the failed disk.

  Now I have a replacement for the defective drive.

  How to make 'good' initialization as a RAID drive and rebuild the new drive?

  How can I get a boot sector capable of Vista/Raid on the disc?

  
  

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• 2.5 AppVolumes second appstack does not show in the BONE

  I have appvolumes deployed, and I created an appstack which has 3 possibilities of use in successfully (chrome, adobe reader and Notepad ++) for testing. I have this set on a non-persistent desktop with the AppVolumes agent installed and it works well. I went back to my VM capture and restored the snapshot, created a new appstack and installed firefox. After completing the capture process, I joined the new appstack to the same VM/user as the original appstack. The new appstack shows no firefox in the virtual machine. It seems that the new appstack VMDK is attached to the virtual machine, but I do not see a shortcut of firefox on the desktop, it does not appear in the program files either. Initially I thought that maybe it had something to do with having mulitple disks attached to the windows 7 x 64 VM. I thought maybe it was a problem of storage controller, but it seems that by default LSI logic SAS controller should take up to 15 HARD drives. This is where my day is over, but I'll be back tomorrow to take a look more, suggestions are welcome.

  Figured it out. We still had the trial installed, license which by default only allows to 1 appstack reach, by user, at the same time. We have installed the real license and it does not work as expected.