Section with context foreach in TBW break

Similar Questions

• How can I change the order of the elements in the "open with" context menu?

  I'm working on XP Prof SP3 and to change the order of the "open with" context menu.

  I like to make the most of my photos, I crop them optimal detail using a specific program for this. This program, I can access by right clicking on the photo icon by pressing H, to open the framework "open with" menu and then I have to scroll down to 6th place.

  You can imagine that if you do this for a series of hundreds of vacation pictures, you are quickly tired.

  Is there a way how I can change the sort order in the "open with" context menu, because the removal of everything seems not a too good idea.

  Is there anyone out there who can help me?  I thank in advance.

  Michael

  I'm working on XP Prof SP3 and to change the order of the "open with" context menu.

  I like to make the most of my photos, I crop them optimal detail using a specific program for this. This program, I can access by right clicking on the photo icon by pressing H, to open the framework "open with" menu and then I have to scroll down to 6th place.

  You can imagine that if you do this for a series of hundreds of vacation pictures, you are quickly tired.

  Is there a way how I can change the sort order in the "open with" context menu, because the removal of everything seems not a too good idea.

  Is there anyone out there who can help me?  I thank in advance.

  Michael

  This utility is supposed to do what you want, but I have not personally tried:http://www.lopesoft.com/en/fmtools/info.html

• Error when adding a new section with SQL in application websheet

  Get the following error while adding a new section with inside on an existing page SQL query in websheet request.

  ()This is the first time I tried to add a SQL query to an article in a websheet. Is that suppose to work?)
  
  

  

  You can see that access SQL and PL/SQL is already enabled for this application websheet.

  
  

  

  After trying many things, I found the 'access SQL and PL/SQL' must be enabled at the level of the APEX INSTANCE also.

  This is how to do it:

  (1) connect APEX as a forum admin with the following credentials:

  workspace: internal

  user ID: admin id defined during the installation of the apex (usually, it will be admin only)

  password: admin password set during the installation of the apex

  2) click manage the Instance > feature Configuration

  (3) select Yes to enable access SQL in Websheets

  

• My laptop computer with CS5 has decided to break so I bought a new laptop, can I transfer CS5 to my new laptop computer?

  My laptop computer with CS5 has decided to break so I bought a new laptop, can I transfer CS5 to my new laptop computer?

  Please check Adobe - Creative Suite 5 Master Collection: System requirements you can try to Download CS5 products from here.

• Problem with context index

  Hello
  
  I have a situation with context index
  
  EMP table
  ID NAME DESC
  
  --------------------------------------------------------------------------------
  1 RK strange scenario is not running
  2 strange scenario SK running
  3 scenario MK Strange met!
  
  SELECT CONTAINS (DESC, 'scenario') st, id FROM EMP WHERE DESC like '% script % '.
  
  gives me
  
  St id
  
  --------------------------------------------------------------------------------
  0 1
  2 100
  3 100
  
  DESC column is of type varchar2.
  
  My question is how to get back the rules that have been laid out for CONTAINS behaves this way... I need to know the rules
  
  Thanks in advance!
  RK
  
  Published by: RK on February 21, 2012 08:22

  What a double wire?

  Text based searches

• Retrieve data in the CDATA section with e4x

  I got a XML as follows of HTTPService:

  <? XML version = "1.0" encoding = "utf-8"? >
  < QTc >
  < category name = "XML matters" code = "XML" >
  < qa id = '1' shortName = "" >
  < question >
  <! [CDATA [<>...]?] >
  < / question >
  < response >
  <! [CDATA [...] () <>]] >
  < / answer >
  < /qa >
  < qa id = "2" shortName = "" >
  < question >
  <! [CDATA [which is an < element >?]] >
  < / question >
  < response >
  <! [CDATA [< component > is the element of XML node]] >
  < / answer >
  < /qa >

  < / category >
  < / QTc >

  How to get the questions and answers in the CDATA section with e4x?

  Should be something like:

  XML... QA [0] issue. Text(). ToString()

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Problem with XML and different line break styles

  I'm working on a project that is being developed by some developers Flash Builder 4.6 running in Windows and some developers Flash Builder 4.6 running under OSX. We have difficulties due to the difference of newlines between the two environments. In an .as file with line breaks in style UNIX is similar to the following code:

  var XML = < document >

  < item >

  < / item >

  < / document >;

  xml.appendChild (SomeClass.getXML ());
  

  SomeClass.getXML () is located in a file .as using type line breaks Windows and is similar to the following:

  public function getXML (): XML

  {

  var moreXML:XML = < anotherElement >

  < childElement >

  < / childElement >

  < / anotherElement >;

  Return moreXML;

  }

  When the XML object is serialized and written to a file on a Windows computer, it looks like this:

  < document >

  < item >

  < / item >

  < anotherElement >

  < childElement >

  < / childElement >

  < / anotherElement > < / document >

  Line for all outside anotherElement breaks are of the form \r\n. Line breaks it contains are of the form \r\r\n, causing thus the empty lines. I'm guessing that the odd line breaks are the cause of the strange setting indented, as well. None of these problems occur when XML is added to the xml file .as that employees style UNIX line breaks.

  Is it possible to force the Flash Builder to use UNIX on Windows style line breaks? Otherwise, there are relatively specific to this problem solutions? Thank you!

  Section clarified

  I found a setting to force a certain style of line breaks: window-> Preferences-> General-> Workspace (delimiter line of file new text). The XML serializes as planned today.

• 26 incompatible Firefox with my display driver, pages break scrolling

  Under Win XP Intel dual core 3.2 GHz with Intel G41 Express Chipset graphics driver

  Display sites very well everything first, but as soon as you start scrolling the image breaks and seems to be scrolling diagonally

  Downgrade Firefox 25 and all is well again

  26 of Firefox is in beta and the first Firefox beta version 26.0b1 will be released yesterday, so the links on different pages can still need to be adjusted.

  • http://www.Mozilla.org/en-us/Firefox/all-beta.html

• IDSM2 with FWSM with contexts

  Hiya,

  I'm not a security guy so keep things simple!

  If the deployment of a FWSM with multiple contexts, and you have installed a JOINT-2:

  The JOINT split into contexts to match the FWSM contexts

  If this isn't the case, it monitors the background traffic of basket and not matter or don't care about multiple contexts.

  Hello.. looking at your chart... I suggest to try and place the JOINT-2 while traffic is inspected after that firewall policy has been verified otherwise you might end up inspection of the traffic that will be blocked by the firewall in any way. You also need to create what is called limit VLAN so that your JOINT bridge traffic between the VLANS inline... Confused... ?

  It gets a little "blue" when you try to inspect inline on a module. For example let's say you have Contexte1 with Interfaces (outside) VLAN10 VLAN20 (inside). You must create an another VLAN30 (limit VLAN). You must then assign the devices ONLY (not the interface of the ASA) of VLAN20 VLAN30 to (only change the membership to a VLAN and not the regime of intellectual property). Then on one of the JOINT-2 detection of ports, you must create a pair of inline VLAN (he uses subinterfaces) what <->VLAN20 VLAN30 bridges. In this traffic to/from your interior devices way will be through the JOINT-2 before reaching its destination

  I suggest you create a test context, allocate 2 VLANS, create the pair of inline VLAN on JOINT-2 and test... Once you are happy, you can reproduce the same configuration for the contexts of production.

  Below a brief example what you need to do for each context

  probe # configure terminal

  Sensor (config) # interface service

  Sensor(config-int) # Physics - interface GigabitEthernet0/2

  Sensor(config-int-PHY) # admin - active state

  Sensor(config-int-PHY) # INT1 description

  Sensor(config-int-PHY) # subinterface of type inline-vlan-pair

  sous-interface Sensor(config-int-PHY-INL) # 1

  vlan1 Sensor(config-int-PHY-INL-Sub) # 52

  vlan2 Sensor(config-int-PHY-INL-Sub) # 53

  Sensor(config-int-PHY-INL-Sub) # description pairs VLAN 52 and 53

  view the settings of Sensor(config-int-PHY-INL-Sub) #.

  subinterface-number: 1

  -----------------------------------------------

  Description: Default VLANpair1:

  VLAN1: 52

  VLAN2: 53

  -----------------------------------------------

  output Sensor(config-int-PHY-INL-Sub) #.

  output Sensor(config-int-PHY-INL) #.

  output Sensor(config-int-PHY) #.

  output Sensor(config-int) #.

  Apply changes:? [Yes]:

  I hope that helps... Rate if he does!

• Choose the program by default, open with context menu right-click on a program does not!

  When I right click on an application such as a text document and try to change its default program (right click, open with, choose the program by default) I get an error says: "this file has no program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel. »
  There is no problem to open the application, but the problem is the button ONLY!
  Fix association .exe, .txt, etc. did nothing!
  You can see my thread on SevenForums here: http://www.sevenforums.com/performance-maintenance/221020-choose-default-program-button-right-click-not-working.html
  and this problem as my problem: http://superuser.com/questions/69193/choose-default-program-does-not-work-is-broken-on-windows

  Thank you!

  Problem solved by a person post in the Forums of Vista, that what he said in this thread (Thread link: http://www.vistax64.com/general-discussion/202928-open-choose-default-program-error-vista-2.html#post939031 ):

  "PROBLEM SOLVED!"
  HOO HOO!

  I want to thank you once again BRINK for ideas on how to solve this problem.
  The next step below, this is how I solved this annoying problem:

  First of all, I came across this article on the Microsoft Web site by changing my google search to solve the problem. I started the google search with the following:

  'open with' lack of context menu

  Who brought results with the first being a microsoft link:

  Command 'Open with' missing from the context Menu

  Now the article didn't tell me exactly how to solve this problem, but it gave me an idea.
  He said look at the following reg key:

  HKEY_CLASSES_ROOT\Unknown\shell\openas\command

  And he said to watch the following default value:

  C:\%windir%\rundll32.exe shell32.dll, OpenAs_RunDLL %1

  After that, I noticed that the value was different, but then I noticed in watching the article says that this applies to Windows 95 and 98.
  I then looked at the same key on my laptop that is running Vista Ultimate 32 bit also and I noticed there are subfolders on my laptop that my office did not have.
  It should look like the following:

  HKEY_CLASSES_ROOT\Unknown
  \DefaultIcon
  \+Shell
  \+openas
  \COMMAND
  \+opendlg
  \COMMAND

  My office was only the DefaultIcon folder.
  Well I just copied the key from my laptop and voila... it worked.
  I thank the gods of the computer. This has really been bugging me. I know that some people would have just reconfigured or installed a new but I knew it was an easy fix. I thought it was a reg key or windows dll file, but I just need to find the location where he resided in. Luckily I came across this article which pointed me in the right direction. Now I feel like I accomplished something.

  Sorry if this is a bit long but I HATE it when I'm looking for answers in the forums and I see someone say they have solved their problem, but they either don't say anything about how they fixed or that they are so vague that they could didn't say anything.
  I hope this helps others if they have this problem.

  Thank you once again on BOARD! "

  That's all!

• Problem with context Menu appearance

  I didn't know where else to post this, so if this is in the wrong section, sorry.

  Whenever I right click, now my context menu looks like this: http://gyazo.com/1f8d086bf5c73137728f88124bad0911 . It is not normally look like this on the victory. 7.
  What would cause this? Is it possible to fix this?

  The menu appears fine for me. Perhaps you are wondering why it apperas in the style "classic"?

• Using the "open with" context in the registry.

  I want (need) to use the framework 'open with' on my computer at home, but it doesn't seem to be there on my Windows 7 Home Premium * edition.

  I tried to restore it with instructions (Microsoft, I think), but were not successful (maybe not be able to restore it if it was never there in first place).
  Is there a way to enter in the registry, perhaps by the upgrade to Windows 7 Ultimate?
  software operating has been installed on the computer HP TouchSmart when I bought it a few years ago.

  See if this tutorial help

  http://www.SevenForums.com/tutorials/52833-open-context-menu-item-Add-Remove.html

• BI Publisher RTF model - fill a cell with a group without line breaks for each element

  I have a fairly rigid rtf model with multiple cells. A cell in particular just display a value of a single group.

  I want to display all the values of group in the cell, but instead of display each value on a new line of the

  cell and cell resizing, I need a way to repeat the values (we hope) without resizing the cell.

  Thus, for example, given a simple group such as < GROUP > < VALUE > where the GROUP contains the VALUES 1, 2, 3, 4 and 5.

  a normal <?-foreach: GROUP? > <? VALUE? > <? end foreach? > product

  CELL
  OUTPUT: 1 2 3 4 5

  What I would like is to be able to output the following (assume the slot size cell is not resized one appears exactly as it does in the rtf)

  CELL
  OUTPUT: 1 2 3 4 5

  The tricky part is that I'd love to be able to have the text wrapping, once he arrives at the edge of the cell. Is there a simple way to do this?

  After a search in a dozen of nets beforehand of course, I find the answer, about 10 minutes after the announcement.

  Knew it was something simple!

• How to get the effect of scrolling of pages instead of sections, with muse

  I need to create pages both within the Web site, that the site is graphics based

  is need to scroll effect on pages not for the section possible

  Please visit http://maxbrenner.com/

  I need the exact effects of horizontal and vertical for the pages of diccrent, I can get wih scrollmotion

  but the problem is that when I switch from one page to another, it does not provide this movement acceleration effect

  I don't know what you're trying to do? Movement of scrolling works only from one section to another in a single page. You can't jump to different pages with scrolling movement. Go to another page will always load in the browser.

• two 'Adobe Reader' menu items in "Open with" context menu

  Is there a simple remedy to the problem of multiple occurrences of "Adobe Reader" in the context menu?

  In other words, in the Finder, Mac OS 10.6.8 I see two instances of "Adobe Reader" in the menu "open with...". »...

  Thank you in advance.

  lsregister - kill - r-domain local - domain-domain user system

  That did the trick for my particular situation.

  The "lsregister" program is part of the CoreServices framework in Snow Leopard.