secure network

Similar Questions

• Satellite A300 - does not connect to the secure network to WPA

  Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

  I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

  Would be grateful for your help.

  Thank you.

  On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
  Then I would try the new driver.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• all domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

  you are the network administrator for abc.com domain. All domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

  Please repost your request in the appropriate in the Windows Server Forum.  Thank you!

• Windows XP does not ask for password for a secure network, wifi not connecting. Says "validating identity".

  Have tried just about everything I can think of. computer is connected to the front secure networks without problem.

  More information would be useful.  Windows XP did not support thereafter until SP3 WPA2 wireless encryption, so if you have not installed SP3 and try to authenticate on a network protected by WPA2, it may not work.

  Assuming that you do not have SP3 installed, try to go into your wireless network configuration / configuration screen.  (There are several different configurations of wireless, including ZeroConfig, but we do not know that you are using).  All most of them save previous in a 'profile' wireless connections so that when he meets this wireless again, he knows how to configure itself.  Find the section of your configuration screen profile, look for the SSID of the router you are trying to connect, and if you see it, then delete that profile.  This will allow your machine to then reconnect to the router wireless with an open mind.

  HTH,
  JW

• How to make a secure network

  Just recently someone uses our internet to download whatever want them. I have a computer at home and 2 laptops and one pc connected to the internet. Is it possible to just restrict to these 3 as well as the House and make a secure network?

  Thank you, Tom

  type 192.168.0.1 in the URL bar of your browser (if it does not, type 192.168.1.1) and click on enter. Your router wireless page will appear. Connect to your router using the username admin and the password you defined (if any). The settings you change will be in the settings or wireless settings menus, but it's different for several routers, so you will need to explore the menus.

  You'll want to define the type of WPA security and use a long hard to guess the password.

  teengeek.freehostingcloud.com Microsoft community contributor

• Printer not connecting with secure network, OK on non-secure

  OfficeJet 4500 Wireless, Windows 7 64 bit, no error message

  Printer works fine on the unsecured network, but doesn't connect on the secure network.  Poster Network Setup page everything is OK on both configurations, wireless network Test report displays all is OK on both networks.

  When I put my laptop and HP 4500 wireless to my non-secure network, they work very well together.  When I put to my network all secure check them reports are fine, but printer will not see the laptop.  Printer icon displays a yellow triangle but autofix does not help.  No other PC running on the network.

  Thanks in advance for any help.

  Ken

  What kind of security - WEP, WPA, WPA2?  When you reconnect the printer, you must remove and re-add the printer in your control panel:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• OfficeJet 6000 E609n - Wireless concludes SSID and secure network but will not connect

  I use Mac OS 10.5.8. I installed the printer for USB and went to the next step to configure wireless. My secure network, it obtains the SSID and then asks the WPA personal password for the network. I enter this and click on continue and the message comes back, "the Wi - Fi network selected «...»» ' is not within reach of the unit. ' Button choices are 'Change network' or 'Retry '. Despite attempts unsuccessfully repeated. However, I scanned for other networks and found a secure and connected to this network. Go figure. My router is sitting on my desk next to the printer. The router is a D - Link DIR-655 n I'm on cable for ISP services. When I first bought the printer, we were away on vacation, and I've successfully added to my Mac laptop. I have reset the printer found in the then successful and user guide to establish a connection to the House, with the unsecured network (I don't live in a condo so no idea whence the other network). Thank you.

  You can try to update the firmware on your router.  Some of these models have had problems with HP printers and Netgear was subsequently fixed it with a new version of the firmware.

• secure network on vlan

  Hello

  We have recently implemented VOIP company.

  Our PBX did not have the option for VOIP and was connected to our network for security reasons, because our PBX partner has access to the PBX to support reasons. After upgrade from PBX VoIP, it is connected to our network VLANs separated.

  I wonder what the best solution is to make sure that our partner has no access to the rest of our network? Only the VLANs VOIP should be accessible from their side.

  All VLANS can communicate between Via router which has configured VTP domain.

  You can place an ACL on the router. But you have an interface with an ip address for vlan 20? The router uses sous-interfaces for vlan 20?

  If so the I would

  access-list 120 permit
  access-list 120 permit
  access-list 120 permit
  access-list 120 permit
  ...
  int vlan20
  ip access-group 20 in
  

  Now if the router has just one of his ports connected to a port on the swiitch for vlan 20 and it has an ip address on this interface, and then apply the ACL on the interface instead of the vlan.

  I hope that makes sense.

  PK

• HI I have not my key security network and theres no line phone here to run an ethernet transfer

  We have 3 machines for net use at home, 2 laptops and a very powerful computer, oh and the different apple phones.

  We plugged the laptops using the blue ethernet, but as this new pc is set up another room that we wouldn't do the same thing but just connect us.  The re is not a network security key anywhere can you help please

  Paul Sherriff

  If you have another computer running Windows 7 or Vista or XP wireless, you can use Windows Connect Now [WCN] on this computer and copy your home wireless profile to a flash drive. Once you do that you can just plug the flash drive into your new laptop Win 7 or find the key wireless in plain text format in the file \Smrtntky\Wsetting.txt on flash drive. Simply copy - paste to the customer.

  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html#Windows_Connect_Now

  Also note that if you have another computer wireless Win 7 on your network, you can see the wireless key/password encryption / password in plain text. Copies to the new Windows 7 computer.

  http://sdrv.Ms/LzWbgO

  You may also be able to connect to the wireless router and see plain text encryption key. Check the users manual or manufacturers support site to help with that.

• He cannot get a secure network through my Modem /router Motorola. 851CF wireless signal strength is excellent but the NW is not secure?

  Y at - it an upgrade or a fix that will allow my card on my Compaq Presario Notebook compatible with security WPAPSK wireless?

  Yes my ISP Tech Spt had to replace my PC and to design a new configuration, as the N/W wireless on my PC cards are not recognized by my Motorola modem... took 2 hours but it is now fixed

• How can I see the security network key / password for my wireless network (all I see is points and the characters of the show option does not work)

  I'm trying to find out what is the password for my internet connection.  I can see the properties of the network and the password appears as a series of points.  the "Show characters" checkbox does not work... is there anyway I can find what is the password?

  Hello

  If you don't remember the password registered for you wireless, you can always reset your router to the factory default settings.
  Unfortunately, we cannot help you recover files and features that are lost or forgotten passwords.
  For more information about the lost passwords, please see the following Knowledge Base Article:
  http://support.Microsoft.com/kb/189126

• Need help creating Unique SSID and secure network

  My AP has been recently reset the SSID I had chosen has of course been erased and AP is now considered to be "linksys". It also now broadcasts as an open network.

  I tried to create a new network using the Intel PROSet/Wireless graphical user interface that came with my PC and it allows me to create a SSID and put a password on it, but it does not affect the real "linksys" network even if I would have erased "linksys" in the text box and enter my own.

  I tried in vain to reset the AP again and connect to 192.168.1.245 using IE and firefox, I get an error loading page every time. I have also tried to set the IP address of my PC to the same meanings and the subnet by default 255.255.etc and could not connect.

  I also tried to connect the AP to the pc directly, what does not work.

  What I am doing wrong.

  PS. I don't have the original installation CD, I think it would be solved.

  I managed. Thank you!

• HP Laserjet Color mfp M175nw 100: How can I connect the router to secure network?

  How do you set the printer to connect to the network through a router password? Where would you want to enter the password?

  On page 43 of the technical reference software, it shows how to configure the wireless through the built-in Web server.

  This link also have other reference documents (manual, software reference technique, quick reference Guide and Setup Guide) that might be useful in the future.

• Securing network with ISE profiling HP devices

  Hello

  How can I create a profile for Hewlett Packard printers and leave them on the network without allowing any other HP device access. I want to only allow HP printers. I don't want to leave laptops HP, desktop computers, notebooks, etc..

  I prefer not to leave on the network using MAB.

  Thank you

  Bob

  It is a common use case. The profiling of ISE Design Guide (see page 76 go) presents at least a way of doing this - using a probe nmap Scan Endpoint.

• Phone smart BlackBerry Z10's secure network. (hard locked)

  I bought a blackberry through eBay z10. And it's an any phone. My brother has entered unfortunately bad MEP code 10 times. And now it is hard locked. No Sim card doesn't work. What do I showed this phone for each and every service centers to Indore (India). But they could not unlocked it. So please help me

  He can't be unlocked. It is permanently blocked.